Polymer Property : Density = 0.0390 lb/in³ Product List

Physical Properties

Tips: 30 items are displayed at most.

Physical Properties	Metric	English	Comments
Density	1.08 g/cc	0.0390 lb/in³	ASTM D792
Multibase Multi-Pro® 2516 CU Polypropylene Calcium Carbonate Filler, 25% by weight.Features:Gloss, High UV Resistance, Good Forms:PelletsProcessing Methods:Injection MoldingUses:FurnitureLawn and Garden EquipmentInformation provided by Mult..
Density	1.08 g/cc	0.0390 lb/in³	ASTM D792-91
Multibase Multi-Pro® 2518 CU 25% Mineral Filled Polypropylene Multi-Pro 2518 CU is a mineral reinforced polypropylene compound offering overall balanced impact and stiffness properties. This material is specially formulated with UV stabilization for outdoor ex..
Density	1.08 g/cc	0.0390 lb/in³	ISO 1183
Polyplastic TechnoTep B® 60 A Thermoplastic Elastomer, Mineral Filled Medium mineral filled, weather stabilityInformation provided by PolyPlastic Group.
Density	1.08 g/cc	0.0390 lb/in³	NCMT Method
NCMT NanoPAC™ S206 High Performance Polypropylene Nanocomposite Characteristics: High stiffness Supplementary of ABS Good impact resistant Less shrinkage Good thermal conductivity Applications: Toys Industry AutomobileInformation provided by Nano Composite Mater..
Density	1.08 g/cc	0.0390 lb/in³
Premix Thermoplastics PRE-ELEC® PS 1326 PRE-ELEC PS 1326 is a conductive thermoplastic compound based on polystyrene. Conductivity is achieved by using special conductive carbon black. In addition to a low electrical resistivity PRE-ELEC ..
Density	1.08 g/cc	0.0390 lb/inÂ³	DIN 53479; ASTM D792
Kolon KOPAÂ® KN333HI4 High Impact Nylon 66 KOPAÂ® is a thermoplastic resin with excellent mechanical, thermal and electrical properties and is widely used in the automobile, electrical and industrial parts.High tensile strength, outstandin..
Density	1.08 g/cc	0.0390 lb/inÂ³	ASTM D792
SABIC Innovative Plastics LNP STAT-KON CD0001 PS LNP* STAT-KON* CD000I is a compound based on Polystyrene resin containing Carbon Powder. Added features of this material include: Electrically Conductive, High Impact.
Density	1.08 g/cc	0.0390 lb/inÂ³	ISO 1183
SABIC Innovative Plastics LNP Stat-kon CX01039 PS (Europe-Africa-Middle East) LNP* Stat-kon* CX01039 is a compound based on Polystyrene resin containing Proprietary Filler(s). Added features of this material include: Electrically Conductive.This data was supplied by SABIC-IP..
Density	1.08 g/cc	0.0390 lb/inÂ³	ASTM D792
Techmer ES PlastiblendÂ® ABS 8015 CL Availability: North AmericaForms: PelletsFeatures: CopolymerAppearance: Clear/TransparentInformation provided by TP Composites, Inc.
Density	1.08 g/cc	0.0390 lb/inÂ³
Silon TA 2322 HD Blue Catalyst Masterbatch Masterbatch for use with SILON Silane cross-linkable PE-Xb Compounds TA 1108 HD.TA 2322 HD, together with the above mentioned graft, contains the cross-linking catalyst to complete a Sioplas System...
Density	1.08 g/cc	0.0390 lb/inÂ³	ISO 1183
SABIC Innovative Plastics NORYL GTX GTX989 PPE+PA (Europe-Africa-Middle East) NORYL GTX989 is a conductive and high heat material, especially designed for in- and on-line painted bodypanels and fenders in particular. This material combines impact performance with conductivity..
Density	1.08 g/cc	0.0390 lb/inÂ³	ISO 1183
SABIC Innovative Plastics Noryl PPX PPX615 PPE+PP (Europe-Africa-Middle East) Good chemical resistance. Designed for a balance of stiffness and practical impact strength.This data was supplied by SABIC-IP for the Europe-Africa-Middle East region.
Density	1.08 g/cc	0.0390 lb/inÂ³	ISO 1183
SABIC Innovative Plastics NORYL FXN121LG PPE+HIPS (Europe-Africa-Middle East) Noryl* FXN121LG is an unfilled modified polyphenylene ether resin suitable for injection molding. Designed to possess a unique low gloss surface appearance even when molded in polished tools, this r..
Density	1.08 g/cc	0.0390 lb/inÂ³	ISO 1183
Solvay TECHNYLÂ® 27010ST PA66, Conditioned Description: Polyamide 66, with very high impact resistance even at low temperature, for injection molding.Available in: Asia PacificProduct Applications: TECHNYLÂ® 2710ST is used in all sector of..
Density	1.08 g/cc	0.0390 lb/in³	DIN 53479
Polyram PlusTek PA860 Nylon 6.6, Impact Modified Super tough - impact modified polyamide 6.6 for injection molding applicationsInformation provided by Polyram Ram On Ind.
Density	1.08 g/cc	0.0390 lb/in³
Loctite® 290 Wicking Grade Threadlocker ThreadlockersInvented by Loctite Corporation as a revolutionary method to lock and seal threaded fasteners, Loctite® Liquid Threadlockers have found wide acceptance in a range of applications--from..
Density	1.08 g/cc	0.0390 lb/in³	ISO 1183
Covestro Desmopan® W DP 89051D Polyurethane PreprocessingMax. Water content
Density	1.08 g/cc @Temperature 300 °C	0.0390 lb/in³ @Temperature 572 °F	Melt
Covestro Makrolon® 9415 Polycarbonate, 10% Glass Filled ISO 7391-PC,MFR,(,,)-09-9,GF10Global gradeMVR (300 °C/1.2 kg) 6.0 cm3/10 min10 % Glass fiber reinforcedChlorine- and bromine-free flame retardantUL 94V-0/1.5 mm and 5VA/3.0 mmHigh viscosityEasy rel..
Density	1.08 g/cc	0.0390 lb/in³	ASTM D792
Ensinger Tecamid® ST Nylon (PA) Super Tough nylon, increased impact resistance and toughness over nylon 6/6.Information provided by Ensinger, Inc.
Density	1.08 g/cc	0.0390 lb/in³	ASTM Data
Dow Tyril® 1000B SAN TYRIL® 1000B SAN copolymer offers the best balance of physical properties of all TYRIL grades. It also provides excellent processability and chemical resistance, superior heat resistance, and good ..
Density	1.08 g/cc	0.0390 lb/in³	dry; ISO 1183
BASF Ultramid® 8255 HS PA6 (Conditioned) Ultramid 8255 HS is a heat stabilized, impact modified type 6 nylon graft copolymer developed for both injection molding and extrusion applications. It exhibits varying levels of toughness and fle..
Density	1.08 g/cc	0.0390 lb/in³	Accelerator
3M Scotch-Weld™ DP8805NS Low Odor Acrylic Adhesives 3M™ Scotch-Weld™ Low Odor Acrylic Adhesives are high performance, two-part acrylic adhesives with lower odor than most acrylic adhesives. These toughened products offer excellent shear, peel, and ..
Density	1.08 - 1.12 g/cc	0.0390 - 0.0405 lb/in³	ISO 1183
Austin Novel Materials Texalan® 465A Polyester-based TPU Description: Can be considered as custom-made products which use different raw materials to meet customers special requirementsInformation from Dawnentech
Density	1.08 g/cc	0.0390 lb/in³	ASTM D792
Ashley Polymers Ashlene® 827LD Nylon 6 A very high impact nylon resin for injection molding applications. Outstanding low temperature properties.Data provided by the manufacturer
Density	1.08 g/cc	0.0390 lb/in³
Solvay RHODAFAC® RA-600 E Surfactant Description: Soluble in water and mineral oil. Exceptional stability in alkali. Outstanding compatibility in concentrated electrolyte solutions. Effective coupling agent for nonionic surfactants in ..
Density	1.08 g/cc	0.0390 lb/in³	ISO 1183
Styrolution Luran® 368 R Crystal Clear Transparent 77851 SAN Description: General-purpose grade with well-balanced properties, suitable for injection molding and extrusion. Especially for applications where highest transparency and low natural color is requir..
Density	1.08 g/cc	0.0390 lb/in³	ISO 1183
Styrolution Luran® 368 R SAN General-purpose grade with well-balanced properties intended for both injection molding and extrusion.Information provided by STYROLUTION, which is a joint venture between BASF and INEOS.
Density	1.08 g/cc	0.0390 lb/in³
Sax Polymers SAXALEN PPC345G30 Polypropylene Copolymer, 30% Glass Filled SAXALEN PPC345G30 is a 30% glass filled Polypropylene - Copolymer intended for injection molding.Information provided by SAX Polymers
Density	1.08 g/cc	0.0390 lb/in³
Solvay RHODAFAC® RM-510 E Surfactant Identification: POLYOXYETHYLENE DINONYLPHENYL ETHER PHOSPHATECAS: 39464 – 64 – 7Solubility: Dispersible in water. Soluble in most polar and aromatic solvents.Available in: Asia Pacific, Europe, La..