- HOME
- POLYMER SEARCH
- Polymer Property : Density = 0.0502 lb/in³
Polymer Property : Density = 0.0502 lb/in³ Product List
Physical PropertiesTips: 30 items are displayed at most.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.39 g/cc | 0.0502 lb/in³ | ISO 1183 |
|
LATI LARPEEK 10 K/30 30% Carbon Fiber Reinforced Polyetheretherketone (PEEK)
(Unverified Data**)
Larpeek polyetheretherketone (PEEK) is a high performance thermoplastic offering cost effective performance in difficult environments across all industries. PEEK is temperature resistant (up to 250°..
|
|||
| Density | 1.39 g/cc | 0.0502 lb/in³ | |
|
Quadrant EPP Ketron® Peek-Classix™ LSG |
|||
| Density | 1.39 g/cc | 0.0502 lb/in³ | ISO 1183 |
|
Nilit FRIANYL B63 HH-GV35 Nylon 6 for injection molding, 35% glass fiber reinforced
Nylon 6 for injection molding, heat and hydrolysis stabilized.Information provided by Frisetta Polymer, which merged into Nilit Plastics
|
|||
| Density | 1.39 g/cc | 0.0502 lb/in³ | ISO data |
|
BASF Capron® 5233G 33% Glass-Filled Nylon 66 (Dry)
(discontinued **)
Capron 5233G is a 33% glass fiber reinforced, polyamide 6,6 injection molding compound offering excellent strength, stiffness, creep resistance and dimensional stability. This balance of engineerin..
|
|||
| Density | >= 1.39 g/cc | >= 0.0502 lb/in³ | C-2011 |
|
I. Stern IS-7985 Polyethylene Terephthalate Resin
Product Description: IS-7985 is a natural polyethylene terephthalate (PET) resin. This resin is produced by continuous melt phase polymerization followed by solid phase polymerization.Certificatio..
|
|||
| Density |
1.39
g/cc <br>@Temperature 23.0 °C
|
0.0502
lb/in³ <br>@Temperature 73.4 °F
|
ISO 1183 |
|
Inno-Comp INNOPOL® CS 1-3260 55% Chalk-Filled Polypropylene Homopolymer
INNOPOL® CS 1-3260 is a 55% chalk-filled polypropylene homopolymer compound /PP-H KD55 (ISO 1043)/. This grade is available in natural and custom colored form.INNOPOL® CS 1-3260 is developed f..
|
|||
| Density | >= 1.39 g/cc | >= 0.0502 lb/in³ | Pycnometer |
|
Indorama Auriga Polymers Polyclearâ„¢ Perserve 2201 PET Resin
Description: Polyclear® Preserve PET 2201 is designed to offer exceptional performance in hot-fill and pasteurized container applications. It has a nominal intrinsic viscosity of 0.82 dl/g. Packa..
|
|||
| Density | 1.39 - 1.51 g/cc | 0.0502 - 0.0545 lb/in³ | |
|
Lord Adhesives 19B Mix-In Black Accelerator for 200, 400, 500 Series
Lord Adhesives 19B Mix-In Black Accelerator for 200, 400, 500 SeriesLord Accelerator 19 Black Mix-in accelerator. Use at 2:1 or 4:1 ratio for Lord 200, 400 and 500 Series Acrylic Adhesives. Well-sui..
|
|||
| Density | 1.39 g/cc | 0.0502 lb/in³ | ASTM D792 |
|
SABIC Innovative Plastics LNP LUBRICOMP ECL36XXQ PEI
LNP* Lubricomp* ECL36XXQ is a compound based on Polyetherimide containing 30% Carbon Fiber, 15% PTFE. Added features of this material include: Internally Lubricated.
|
|||
| Density | 1.39 g/cc | 0.0502 lb/in³ | ISO 1183 |
|
SABIC Innovative Plastics LNP STAT-LOY PF306 PA 6
LNP* STAT-LOY* PF306 is a compound based on Nylon 6 resin containing 30% Glass Fiber. Added feature of this grade includes: Antistat.
|
|||
| Density | 1.39 g/cc | 0.0502 lb/in³ | Typical Mylar®; ASTM D1505 |
|
DuPont Teijin Films Mylar® ADS Polyester Film, 500 Gauge
Mylar® ADS is a heat stabilized, low shrinkage film with good web handling properties. Approvals: UL 94 VTM-2 - for 92 - 500 gauge (0.023 - 0.13mm)Also available in 285 GaugeInformation provided by..
|
|||
| Density | 1.39 g/cc | 0.0502 lb/in³ | Typical Mylar®; ASTM D1505 |
|
DuPont Teijin Films Mylar® C Polyester Film, 92 Gauge
Mylar® Type C films are available in a wide range of generally thinner gauges (typically 10 through 92) that offer excellent electrical properties, combined with superior strength and dimensional s..
|
|||
| Density | 1.39 g/cc | 0.0502 lb/in³ | Typical Mylar®; ASTM D1505 |
|
DuPont Teijin Films Mylar® DS Polyester Film
Mylar® DS is a super clear, biaxially oriented, polyester film with differential surface roughness on each side. Its unique composition, consisting of a smooth side opposite a rougher, filled side,..
|
|||
| Density | 1.39 g/cc | 0.0502 lb/in³ | Typical Mylar®; ASTM D1505 |
|
DuPont Teijin Films Mylar® EC Polyester Film, 300 Gauge
Mylar® EC films are electrical grade films designed for use in applications where improved dimensional stability is required. In addition to lower levels of shrinkage, Mylar® EC films offer outsta..
|
|||
| Density | 1.39 g/cc | 0.0502 lb/in³ | Typical Mylar®; ASTM D1505 |
|
DuPont Teijin Films Mylar® HR951 Polyester Film, 140 Gauge
Mylar® HR951 is a one-side release coated polyester film with good handling properties and clarity. It has been developed for use in various industrial applications.Information provided by DuPont.
|
|||
| Density | 1.39 g/cc | 0.0502 lb/in³ | Typical Mylar®; ASTM D1505 |
|
DuPont Teijin Films Mylar® LJP Polyester Film, 275 Gauge
Mylar® LJP is an industrial grade very clear film that is available with adhesion promoting coatings and slip coatings. For higher quality end-uses (especially for surface requirements) consider us..
|
|||
| Density | 1.39 g/cc | 0.0502 lb/in³ | Typical Mylar®; ASTM D1505 |
|
DuPont Teijin Films Mylar® LJP Polyester Film, 500 Gauge
Mylar® LJP is an industrial grade very clear film that is available with adhesion promoting coatings and slip coatings. For higher quality end-uses (especially for surface requirements) consider us..
|
|||
| Density | 1.39 g/cc | 0.0502 lb/in³ | Typical Mylar®; ASTM D1505 |
|
DuPont Teijin Films Mylar® OB13AF Polyester Film, 100 Gauge
Product Description: Mylar® OB13AF is a biaxially oriented polyester (OPET) film with an amorphous polyester heat seal layer on one side and a polyvinylidene chloride (PVdC) layer on the opposite s..
|
|||
| Density | 1.39 g/cc | 0.0502 lb/in³ | Typical Mylar®; ASTM D1505 |
|
DuPont Teijin Films Mylar® WC11/WC22 Polyester Film, 284 Gauge
Mylar® type WC11 films are general-purpose electrical grade films, similar to Mylar® EL. These clear to hazy films are tough and durable as a core wrap. They offer good dielectric and good handlin..
|
|||
| Density | 1.39 g/cc | 0.0502 lb/in³ | Typical Mylar®; ASTM D1505 |
|
DuPont Teijin Films Mylar® ADS Polyester Film, 400 Gauge
Mylar® ADS is a heat stabilized, low shrinkage film with good web handling properties. Approvals: UL 94 VTM-2 - for 92 - 500 gauge (0.023 - 0.13mm)Also available in 285 GaugeInformation provided by..
|
|||
| Density | 1.39 g/cc | 0.0502 lb/in³ | Typical Mylar®; ASTM D1505 |
|
DuPont Teijin Films Mylar® D804 Polyester Film, 60 Gauge
Mylar® D804 is a super clear, biaxially oriented, co-extruded polyester film, available in 60, 75 and 92 gauge. Mylar® D804 is two-side pretreated for printing and adhesive lamination. Approvals: ..
|
|||
| Density | 1.39 g/cc | 0.0502 lb/in³ | Typical Mylar®; ASTM D1505 |
|
DuPont Teijin Films Mylar® MDA Polyester Film, 142 Gauge
Mylar® MDA films are tough, general purpose films that are transparent in 48 through 92 gauge and translucent in heavier gauges. They have a rough surface to provide ease of handling, good adhesion..
|
|||
| Density | 1.39 g/cc | 0.0502 lb/in³ | Typical Mylar®; ASTM D1505 |
|
DuPont Teijin Films Mylar® MDA Polyester Film, 400 Gauge
Mylar® MDA films are tough, general purpose films that are transparent in 48 through 92 gauge and translucent in heavier gauges. They have a rough surface to provide ease of handling, good adhesion..
|
|||
| Density | 1.39 g/cc | 0.0502 lb/in³ | ASTM D792 |
|
Chem Polymer Chemlon 233 G Nylon 6, 33% Glass Fiber Reinforced
A 33% glass fiber reinforced nylon 6 offering excellent high temperature performance, dimensional stability, tensile strength and impact resistance.Data provided by the manufacturer, Chem Polymer.
|
|||
| Density | 1.39 g/cc | 0.0502 lb/in³ | Typical Mylar®; ASTM D1505 |
|
DuPont Teijin Films Mylar® LJP Polyester Film, 300 Gauge
Mylar® LJP is an industrial grade very clear film that is available with adhesion promoting coatings and slip coatings. For higher quality end-uses (especially for surface requirements) consider us..
|
|||
| Density | 1.39 g/cc | 0.0502 lb/in³ | ASTM D 792 |
|
SABIC Innovative Plastics LNP Verton NV006E PC/ABS
LNP* Verton* NV006E is a compound based on PC/ABS resin containing Long Glass Fiber. Added features of this material include: Easy Molding.This data was supplied by SABIC-IP for the Americas region..
|
|||
| Density | 1.39 - 1.43 g/cc | 0.0502 - 0.0517 lb/in³ | ISO R 1183 |
|
Fainplast Compounds PM 65/R Flexible PVC, Lead Free
Extrusion modified with rubber
|
|||
Copyright © lookpolymers.com All Rights Reserved