- HOME
- POLYMER SEARCH
- Polymer Property : Density = 0.134 lb/in³
Polymer Property : Density = 0.134 lb/in³ Product List
Physical PropertiesTips: 30 items are displayed at most.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 3.70 - 3.75 g/cc | 0.134 - 0.135 lb/in³ | Sintered |
|
Nabaltec GRANALOX® NM 9510 F Ceramic Body
Nabaltec's GRANALOX® Ceramic bodies are produced under rigid quality control of green and sintered density, shrinkage, porosity, loss on ignition and granulate size. The properties of the corundum ..
|
|||
| Density | 3.70 - 3.80 g/cc | 0.134 - 0.137 lb/in³ | Sintered Density |
|
Nabaltec GRANALOX® NM 9612 Ceramic Bodies
Nabaltec`s GRANALOX® Ceramic bodies are produced under rigid quality control of green and sintered density, shrinkage, porosity, loss on ignition and granulate size. The properties of the corundum ..
|
|||
| Density | 3.70 - 3.75 g/cc | 0.134 - 0.135 lb/in³ | Sintered Density |
|
Nabaltec GRANALOX® NM 9620 Ceramic Bodies
Nabaltec`s GRANALOX® Ceramic bodies are produced under rigid quality control of green and sintered density, shrinkage, porosity, loss on ignition and granulate size. The properties of the corundum ..
|
|||
| Density | 3.70 - 3.80 g/cc | 0.134 - 0.137 lb/in³ | Sintered Density |
|
Nabaltec GRANALOX® NM 9620 F Ceramic Bodies
Nabaltec`s GRANALOX® Ceramic bodies are produced under rigid quality control of green and sintered density, shrinkage, porosity, loss on ignition and granulate size. The properties of the corundum ..
|
|||
| Density | 3.70 g/cc | 0.134 lb/in³ | Sintered Density |
|
Nabaltec NABALOX® NO 115 TC Ground Alumina
NABALOX® aluminum oxide has a number of advantages including low sintering temperaturewide sintering rangeflexible processinghigh sintered densities high wear and impact resistanceelectrical insula..
|
|||
| Density | 3.70 g/cc | 0.134 lb/in³ | Sintered Density |
|
Nabaltec NABALOX® NO 325 Ground Alumina
NABALOX® aluminum oxide has a number of advantages including low sintering temperaturewide sintering rangeflexible processinghigh sintered densities high wear and impact resistanceelectrical insula..
|
|||
| Density | 3.70 g/cc | 0.134 lb/in³ | Sintered Density |
|
Nabaltec NABALOX® NO 615-10 Reactive Alumina
NABALOX® aluminum oxide has a number of advantages including low sintering temperaturewide sintering rangeflexible processinghigh sintered densities high wear and impact resistanceelectrical insula..
|
|||
| Density | 3.70 g/cc | 0.134 lb/in³ | Sintered Density |
|
Nabaltec NABALOX® NO 625-10 Reactive Alumina
NABALOX® aluminum oxide has a number of advantages including low sintering temperaturewide sintering rangeflexible processinghigh sintered densities high wear and impact resistanceelectrical insula..
|
|||
| Density | 3.70 g/cc | 0.134 lb/in³ | |
|
NanoScale NanoActive® Titanium Dioxide
NanoActive TiO2 is produced using proprietary processes to obtain high specific surface area (over 500 m²/g), high porosity, weakly aggregated, amorphous material possessing adsorption capacity and..
|
|||
| Density | 3.72 g/cc | 0.134 lb/in³ | |
|
GBC Grade 97 Alumina
Data provided by the manufacturer, GBC Materials Corporation.
|
|||
| Density | 3.70 g/cc | 0.134 lb/in³ | |
|
Misumi Alumina 96 Aluminum Oxide, Al2O3
Information provided by MISUMI Corporation.
|
|||
| Density | 3.71 g/cc | 0.134 lb/in³ | |
|
Indium Corp. Indalloy 186 Germanium-Aluminum Solder Alloy
Information Provided by Indium Corporation
|
|||
| Density | 3.70 g/cc | 0.134 lb/in³ | |
|
Schott N-PK52A Glass
Suitable for precision moldingInformation Provided by SCHOTT North America, Inc.
|
|||
| Density | 3.71 g/cc | 0.134 lb/in³ | |
|
Schott N-SSK5 Glass
Information Provided by SCHOTT North America, Inc.
|
|||
| Density | 3.70 g/cc | 0.134 lb/in³ | ASTM D792 |
|
Techmer ES Electrablend® PPS 06000
Availability: North AmericaForms: PelletsFiller/Reinforcement: Metallic FlakeFeatures: Electrically ConductiveInformation provided by TP Composites, Inc.
|
|||
| Density | 3.70 g/cc | 0.134 lb/in³ | |
|
Sapco 95% Aluminum Oxide
Information provided by Sapco.
|
|||
| Density | 3.70 g/cc | 0.134 lb/in³ | ASTM C20 |
|
CoorsTek AD-94 Alumina (nom. 94% Al2O3)
Thermal Shock Delta Tc = 250°C - Thermal shock tests are performed by quenching samples in water from different elevated temperatures. Delta Tc is the change in temperature which results in a shar..
|
|||
| Density | 3.72 g/cc | 0.134 lb/in³ | ASTM C20 |
|
CoorsTek AD-96 Alumina (nom. 96% Al2O3)
Thermal Shock Delta Tc = 250°C - Thermal shock tests are performed by quenching samples in water from different elevated temperatures. Delta Tc is the change in temperature which results in a shar..
|
|||
| Density | 3.72 g/cc | 0.134 lb/in³ | ASTM-C373 |
|
CoorsTek ADOS-90R 91% Alumina Thick Film Substrate
This 91-percent alumina (nominal) formulation offers a dark brown body for special applications. Applications: thick films and lasers
|
|||
| Density | 3.70 g/cc | 0.134 lb/in³ | ASTM-C 20 |
|
CoorsTek Z-PLUS™ 94 Zirconia-Impr. Alumina Ceramic Armor Material
CoorsTek CeraShield™ ceramics provide: low weight, high hardness, controlled, uniform microstructure, dimensional stability over wide temperature range, compatibility for use in finished armor sys..
|
|||
| Density | 3.70 g/cc | 0.134 lb/in³ | |
|
Du-Co Ceramics DC-265-L-6 Alumina, 96% Al2O3
Properties reported below are averages from unglazed specimens. Tests performed to ASTM specifications. Actual values may vary. Information provided by DU-CO Ceramics Company.
|
|||
| Density | >= 3.70 g/cc | >= 0.134 lb/in³ | |
|
Advanced Ceramics ALC 1082 (C-786) Alumina
Information provided by Advanced Ceramics Limited (ACL)
|
|||
| Density | 3.70 g/cc | 0.134 lb/in³ | Silicone Property; Arlon SQA-TMS-024 |
|
Arlon R36580N008 0.008" ((0.203 mm) Uncured Silicone Rubber with PTFE Coated Fiberglass
Design/Construction: Liner: FEP Product: Uncured Silicone Rubber Carrier: PTFE Coated FiberglassAppearance: Grey silicone gumThis data represents typical values for the production material. The dat..
|
|||
| Density | 3.70 g/cc | 0.134 lb/in³ | Silicone Property; Arlon SQA-TMS-024 |
|
Arlon R36580N015 0.015" (0.381 mm) Uncured Silicone Rubber with PTFE Coated Fiberglass Carrier
Design/Construction: Liner: FEP Product: Uncured Silicone Rubber Carrier: PTFE Coated FiberglassAppearance: Grey silicone gumThis data represents typical values for the production material. The dat..
|
|||
| Density | 3.70 g/cc | 0.134 lb/in³ | Silicone Property; Arlon SQA-TMS-024 |
|
Arlon Thermabond® 99730N004 0.004" (0.102 mm) Uncured Silicone Rubber with PTFE Coated Fiberglass Carrier
Description: Electrically Conductive - Thermabond®. Bonds with primer.Design/Construction: Liner: FEP Product: Uncured Silicone Rubber Carrier: PTFE Coated FiberglassRecommended Primers: Dow Coring..
|
|||
| Density | 3.70 g/cc | 0.134 lb/in³ | Silicone Property; Arlon SQA-TMS-024 |
|
Arlon Thermabond® 99730N015 0.015" (0.381 mm) Uncured Silicone Rubber with PTFE Coated Fiberglass Carrier
Description: Electrically Conductive - Thermabond®. Bonds with primer.Design/Construction: Liner: FEP Product: Uncured Silicone Rubber Carrier: PTFE Coated FiberglassRecommended Primers: Dow Coring..
|
|||
| Density | 3.70 - 4.40 g/cc | 0.134 - 0.159 lb/in³ | ASTM B417 |
|
H.C. Starck Amperit® 551.059 Tungsten Carbide - Chromium Carbide - Nickel 70-20-7 (W-CrC-Ni) |
|||
| Density | 3.70 - 4.40 g/cc | 0.134 - 0.159 lb/in³ | ASTM B212 |
|
H.C. Starck Amperit® 551.074 Tungsten Carbide - Chromium Carbide - Nickel 70-20-7 (W-CrC-Ni) |
|||
| Density | 3.70 - 4.40 g/cc | 0.134 - 0.159 lb/in³ | ASTM B212 |
|
H.C. Starck Amperit® 551.088 Tungsten Carbide - Chromium Carbide - Nickel 70-20-7 (W-CrC-Ni) |
|||
Copyright © lookpolymers.com All Rights Reserved