Polymer Property : Density = 0.860 g/cc Product List

Physical Properties

Tips: 30 items are displayed at most.

Physical Properties	Metric	English	Comments
Density	0.860 g/cc	0.0311 lb/in³	ASTM D 792
REXtac Rextac® RT 2280 Amorphous Polyalphaolefin (APAO) Adhesive and Sealant Grade.Description: Ethylene copolymer and FDA compliantFeatures: Good heat resistance and flexibility, short open time, and high viscosityApplications: Component of hot melt adh..
Density	0.860 g/cc	0.0311 lb/in³	ASTM D 792
REXtac Rextac® RT 2304 Amorphous Polyalphaolefin (APAO) Adhesive and Sealant Grade.Description: Ethylene copolymer and FDA compliantFeatures: Excellent flexibility, wetting characteristics, and medium open timeApplications: Component of hot melt adhesive..
Density	0.860 g/cc	0.0311 lb/in³	ASTM D 792
REXtac Rextac® RT 2315 Amorphous Polyalphaolefin (APAO) Adhesive and Sealant Grade.Description: Ethylene copolymer and FDA compliantFeatures: Balance of heat resistance, flexibility and stiffness, good wetting, and medium open timeApplications: Component..
Density	0.860 g/cc	0.0311 lb/in³	ASTM D 792
REXtac Rextac® RT 2535 Amorphous Polyalphaolefin (APAO) Adhesive and Sealant Grade.Description: Ethylene copolymer and FDA compliantFeatures: Low softening point, excellent tack, excellent flexibility, and long open timeApplications: Component of hot mel..
Density	0.860 g/cc	0.0311 lb/in³	ASTM D 792
REXtac Rextac® RT 2585 Amorphous Polyalphaolefin (APAO) Adhesive and Sealant Grade.Description: Ethylene copolymer and FDA compliantFeatures: Low softening point, excellent tack, excellent flexibility, long open time, and high viscosityApplications: Comp..
Density	0.860 g/cc	0.0311 lb/in³	ASTM D 792
REXtac Rextac® RT 2730 Amorphous Polyalphaolefin (APAO) Adhesive and Sealant Grade.Description: Butene-1 copolymer and FDA compliantFeatures: Very low softening point, medium viscosity, good track, and very long open timeApplications: Component of hot me..
Density	0.860 g/cc	0.0311 lb/in³	ASTM D 792
REXtac Rextac® RT 3385 Amorphous Polyalphaolefin (APAO) Modified Bitumen Roofing Grade.Description: Ethylene copolymer and FDA compliantFeatures: High melt viscosity, balanced temperature resistance, and flexibilityApplications: Component of modified bit..
Density	0.860 g/cc	0.0311 lb/in³	ASTM D 792
REXtac Rextac® RT 4304 Amorphous Polyalphaolefin (APAO) Wire and Cable Grade.Description: Ethylene copolymer and FDA compliantFeatures: Low melt viscosity, moisture barrier, and adhesionApplications: Flooding and filling compounds for wire and cableOther..
Density	0.860 g/cc	0.0311 lb/in³	ASTM D 792
REXtac Rextac® RT 4730 Amorphous Polyalphaolefin (APAO) Wire and Cable Grade.Description: Butene-1 copolymer and FDA compliantFeatures: Excellent low temperature flexibility, lower processing temperature, and superior adhesionApplications: Flooding and f..
Density	0.860 g/cc	0.0311 lb/in³	ASTM D792
Proto3000 CastForm™ PS Selective Laser Sintering (SLS®) Prototyping Polymer Description: Directly produce complex investment casting patterns without tooling..Features: Functions like foundry wax and is “foundry friendly”Low residual ash content (less than 0.02%)Short bur..
Density	0.860 g/cc	0.0311 lb/in³	ASTM D 792
REXtac Rextac® RT 1320 Amorphous Polyalphaolefin (APAO) Laminate Grade.Description: Ethylene copolymer and FDA compliantFeatures: Medium open timeApplications: LaminationOther Properties: Ring and Ball Softening Point (ASTM E 28): 138°C.Needle Penetrati..
Density	0.860 g/cc	0.0311 lb/in³	ASTM D 792
REXtac Rextac® RT 1330 Amorphous Polyalphaolefin (APAO) Laminate Grade.Description: Ethylene copolymer and FDA compliantFeatures: Medium open timeApplications: Lamination of reinforced tapes and protective overwrapsOther Properties: Ring and Ball Softeni..
Density	0.860 g/cc	0.0311 lb/in³	ASTM D 792
REXtac Rextac® RT 2115 Amorphous Polyalphaolefin (APAO) Adhesive and Sealant Grade.Description: Propylene homopolymer and FDA compliantFeatures: High softening point and short open timeApplications: Component of hot melt adhesives, sealants and specialty..
Density	0.860 g/cc	0.0311 lb/in³	ASTM D 792
REXtac Rextac® RT 2180 Amorphous Polyalphaolefin (APAO) Adhesive and Sealant Grade.Description: Propylene homopolymer and FDA compliantFeatures: High softening point, short open time, good cohesive strength, and high viscosityApplications: Component of h..
Density	0.860 - 0.910 g/cc	0.0311 - 0.0329 lb/inÂ³	RP-0549
Solvay RHODOLINEÂ® DF-665 Surfactant Description: Highly efficient mineral oil based defoamers for flat to gloss paints, quick process foam know down and high in-can persistency.Identification: OIL BASE DEFOAMERAvailable in: North Amer..
Density	0.860 g/cc <br>@Temperature 15.6 °C	0.0311 lb/in³ <br>@Temperature 60.1 °F	ASTM D4052
ExxonMobil 150 Mobilgear SHC Series The Mobilgear SHC Series lubricants are heavy-duty gear oils primarily designed for all kinds of enclosed gearing as well as plain and rolling element bearings. They are formulated from wax-free pol..
Density	0.860 g/cc <br>@Temperature 15.0 °C	0.0311 lb/in³ <br>@Temperature 59.0 °F	ASTM D4052
ExxonMobil Mobil 1 10W-30 Mobil 1 10W-30 is the most advanced performance synthetic engine oil designed to provide the cleaning power, wear protection and performance reserve to keep engines running smooth and clean. Mobil 1..
Density	0.860 g/cc <br>@Temperature 15.0 °C	0.0311 lb/in³ <br>@Temperature 59.0 °F	ASTM D1298
ExxonMobil 798 Mobil DTE 790 Series Mobil DTE 790 Series lubricants are premium performance turbine oils that are engineered to meet the requirements of the most severe steam turbine designs and operation, with maximum oil charge life..
Density	0.860 g/cc	0.0311 lb/in³	ASTM D297
Dow Nordel® IP 3670 EPDM Hydrocarbon Rubber Description: Slightly crystalline, ethylene-propylene-diene (EPDM) terpolymer designed for calendering; offers excellent processing characteristics. Low unsaturation level provides stability during ..
Density	0.860 g/cc	0.0311 lb/in³	ASTM D297
Dow Nordel® IP 4520 EPDM Hydrocarbon Rubber Description: Nordel® IP 4520 is an amorphous EPDM grade designed for molded applications. It is ideally suited for injection and transfer molded brake parts, corner moldings, general purpose gasket..
Density	0.860 g/cc	0.0311 lb/in³
ConocoPhillips Hydroclear® 32 Ultra-clean multi-purpose R&O Oil Description: Conoco Hydroclear Ultra-Clean Multipurpose R&O Oil is a rust- and oxidation-inhibited industrial oil with ashless wear protection formulated from premium Conoco hydrocracked base stocks..
Density	0.860 g/cc	0.0311 lb/in³
ConocoPhillips Hydroclear® 32 Turbine Oil Description: Conoco Hydroclear Turbine Oil is a premium rust- and oxidationinhibited turbine oil formulated from exclusive Conoco hydrocracked base stock. Hydroclear Turbine Oil is specially formula..
Density	0.860 g/cc	0.0311 lb/in³
BASF 1,2-PDA 1,2-Propylenediamine Formula: C3H10N2CAS: 78-90-0Description: 1,2-Propylenediamine is a colorless liquid, with an amine-like odor. It is also miscible with water in all proportionsSynonyms: 1,2-PDA, 1,2-Propanediamine,..
Density	0.860 g/cc	0.0311 lb/in³	Sintered; ASTM D792
ALM PS 200 Prototyping Polymer Non-spherical polystyrene powder for production of complex investment casting patterns.PS-200 can be used as a direct drop in replacement for Castform®, and can be successfully blended with Castfor..
Density	0.860 g/cc	0.0311 lb/in³	ASTM D 792
REXtac Rextac® RT 5222 Amorphous Polyalphaolefin (APAO) Modified Bitumen Roofing Grade.Description: High molecular weight REXtac, ethylene copolymer, and FDA compliantFeatures: High viscosity and low crystallinityApplications: Component of modified bitum..
Density	0.860 g/cc <br>@Temperature 15.0 °C	0.0311 lb/in³ <br>@Temperature 59.0 °F	ASTM D1298
ExxonMobil 798 Mobil DTE 790 Series Mobil DTE 790 Series lubricants are premium performance turbine oils that are engineered to meet the requirements of the most severe steam turbine designs and operation, with maximum oil charge life..
Density	0.860 g/cc	0.0311 lb/in³	ASTM D 792
REXtac Rextac® RT 2385 Amorphous Polyalphaolefin (APAO) Adhesive and Sealant Grade.Description: Ethylene copolymer and FDA compliantFeatures: Balance of heat resistance, flexibility, stiffness, high viscosity, and medium open timeApplications: Component ..
Density	0.860 g/cc	0.0311 lb/in³	ASTM D 792
REXtac Rextac® RT 5218 Amorphous Polyalphaolefin (APAO) Modified Bitumen Roofing Grade.Description: High molecular weight REXtac, ethylene copolymer, and FDA compliantFeatures: High viscosity and high ring and ball softening pointApplications: Component ..
Density	0.860 g/cc	0.0311 lb/in³	ASTM D 792
REXtac Rextac® RT 5219 Amorphous Polyalphaolefin (APAO) Modified Bitumen Roofing Grade.Description: High molecular weight REXtac, ethylene copolymer, and FDA compliantFeatures: High ethylene level and low crystallinityApplications: Component of modified ..