Polymer Property : Density = 0.940 g/cc Product List

Physical Properties

Tips: 30 items are displayed at most.

Physical Properties	Metric	English	Comments
Density	0.940 g/cc	0.0340 lb/in³	ISO 1183-1
Quadrant EPP TIVAR® ECO PE-UHMW reprocessed (ISO Data) This grade, partially composed of reprocessed PE-UHMW material, has an overall lower property level than the virgin TIVAR 1000 and a lower cost. Compared with virgin PE 500, however, it has a much b..
Density	0.940 - 0.944 g/cc	0.0340 - 0.0341 lb/in³	Base Resin; ASTM D1505
NIZHNEKAMSKNEFTEKHIM PE 4142L (424F5) High Density Polyethylene Product obtained by gas phase polymerization of ethylene in presence of complex metalorganic catalysts.Information provided by manufacturer
Density	0.940 g/cc	0.0340 lb/in³	ASTM D792
DuPont Elvax® 3174SHB Ethylene-Vinyl Acetate Copolymer Resin for Coextrusion, Cast Film  (discontinued **) 18 wt% Vinyl Acetate.General Elvax® information: Elvax® packaging grade resins include low seal temperatures for use in coextrusions or for packaging temperature sensitive materials, excellent dra..
Density	0.940 g/cc	0.0340 lb/inÂ³	ISO 2781
KKPC KOSYN KTR 301 Thermoplastic Elastomer (TPE) Thermoplastic Elastomer (TPE)Characteristics: KOSYN KTR101 is linear block copolymer made by solution polymerization which polymerizes butadiene and styrene in organic solvent. It is thermoplastics ..
Density	0.940 g/cc	0.0340 lb/inÂ³	Natural; ASTM D4883
Ineos K38-20-188 HDPE K38-20-188 is a natural, UV stabilized, medium density polyethylene resin designed specifically for use with an approved Ineos North America yellow masterbatch to produce pipe or tubing for natural ..
Density	0.940 g/cc	0.0340 lb/inÂ³	ASTM D1475
Lord Adhesives ChemglazeÂ® V004 Polyurethane Coating ChemglazeÂ® V-Line polyurethane coatings are moisture curing aliphatic polyurethane coatings. They are used in product finishing applications on polyvinyl-chloride (PVC) and other plastics where m..
Density	0.940 g/cc	0.0340 lb/inÂ³	ASTM D1505
Lushan EP252 Adhesive Resin for Sewerage and Drainage Pipe Adhesive resin Lushan EP252 is maleic grafted polyethylene. Itâ€™s mainly used for reinforced PE spiral corrugated steel pipes and steel wire with larger caliber. Adhesive resin Lushan EP252 solv..
Density	0.940 g/cc	0.0340 lb/inÂ³	Not Compounded
KKPC KOSYN 1507 Styrene Butadiene Rubber Styrene Butadiene RubberCharacteristics: KOSYN SBR, a useful synthetic rubber, is a copolymer made from butadiene and styrene by cold emulsion polymerization. It has superior abrasion resistance and..
Density	0.940 g/cc	0.0340 lb/inÂ³	Not Compounded
KKPC KOSYN KNB 35LL Acrylonitrile Butadiene Rubber (NBR) Acrylonitrile Butadiene Rubber (NBR)Characteristics: KOSYN KNB is copolymer of high oil resistance and chemical resistance made from acrylonitrile and butadiene by the cold emulsion polymerization. ..
Density	0.940 g/cc	0.0340 lb/inÂ³	Not Compounded
KKPC KOSYN KNB 40M Acrylonitrile Butadiene Rubber (NBR) Acrylonitrile Butadiene Rubber (NBR)Characteristics: KOSYN KNB is copolymer of high oil resistance and chemical resistance made from acrylonitrile and butadiene by the cold emulsion polymerization. ..
Density	0.940 g/cc	0.0340 lb/inÂ³	ASTM D792
Teknor Apex SarlinkÂ® 3470N Thermoplastic Elastomer A NSF certified, colorable, multi-purpose thermoplastic elastomer featuring excellent fluid resistance and high temperature performance. It can be processed by injection molding, blow molding or ext..
Density	0.940 g/cc	0.0340 lb/in³	ASTM D792, ISO 1183
DuPont Elvax® 3165LG Ethylene Vinyl Acetate DuPont™ Elvax® 3165XZ is an extrudable ethylene-vinyl acetate copolymer resin containing low gel material available in pellet form for use in conventional extrusion equipment designed to process p..
Density	0.940 g/cc	0.0340 lb/in³	ASTM D792
DuPont Nucrel® 925 Ethylene-Methacrylic Acid Copolymer Resin Nucrel® 925 is a tough, lightweight, easily processed ethylene copolymer resin. This resin is inherently flexible without the need for plasticizers. The resin can be pigmented, UV-stabilized for ..
Density	0.940 g/cc	0.0340 lb/in³	ASTM D1505
Westlake EBAC® Plus SP1903 18% Ethylene Butyl Acrylate Copolymer Westlake EBAC® SP1903 is an 18% EBA copolymer designed for blown film, tie-layers, and extrusions where flexibility, compatibility, or low heat seal temperatures are required. SP1903 provides excel..
Density	0.940 g/cc	0.0340 lb/in³	ASTM D 792
Total 3802 YCF MDPE pipe grade FINATHENE® 3802 Y CF is a polyethylene copolymer based on C6 hexene as co-monomer and is produced by a continuous low pressure slurry polymerization process. FINATHENE® 3802 Y CF is a yellow cadmi..
Density	0.940 g/cc	0.0340 lb/in³	ASTM D792, ISO 1183
DuPont™ Bynel® 21E810 Anhydride Modified Ethylene Acrylate BYNEL® Series 2100 resins are anhydride modified ethylene acrylate resins. They contain a temperature stable ester that allows them to be functional in high temperature coextrusions. They are avail..
Density	0.940 g/cc	0.0340 lb/in³	ASTM D792, ISO 1183
DuPont™ Elvax® 3155 Ethylene Vinyl Acetate DuPont™ Elvax® 3155 is an extrudable ethylene-vinyl acetate copolymer resin available in pellet form for use in conventional extrusion equipment designed to process polyethylene resins. ELVAX® 31..
Density	0.940 g/cc	0.0340 lb/in³	Estimated by MatWeb
DuPont™ Surlyn® 1601-2LM Sodium Ionomer Resin for Blown and Cast Film Surlyn® 1601-2LM (Low Moisture) is an ionomer resin available for use in conventional blown and cast film extrusion and coextrusion equipment designed to process polyethylene resins. Applications:..
Density	0.940 g/cc	0.0340 lb/in³	Estimated by MatWeb
DuPont™ Surlyn® 1650 Zinc Ionomer Resin for Blown and Cast Film Surlyn® 1650 is an ionomer resin available for use in conventional blown and cast film extrusion and coextrusion equipment designed to process polyethylene resins. Applications: Meat, poultry, sea..
Density	0.940 g/cc	0.0340 lb/in³	ASTM-D1505 / ASTM-D792
Braskem VA2019A EVA Foam Copolymer The VA2019A is a copolymer of Ethylene-Vinyl Acetate (EVA) with medium vinyl-acetate content. VA2019A is an easy processing product with high compatibility with other thermoplastic and elastomeric r..
Density	0.940 g/cc <br>@Temperature 23.0 °C	0.0340 lb/in³ <br>@Temperature 73.4 °F	ISO 1183
Arkema Group LOTADER® 3200 Terpolymer Ethylene - Acrylic Ester - Maleic Anhydride LOTADER 3200 is a random terpolymer of Ethylene, Acrylic Ester and Maleic Anhydride, polymerized under high pressure in an autoclave process. Due to its properties, LOTADER 3200 is used in pipeline ..
Density	0.940 g/cc	0.0340 lb/in³	ASTM D792
Teknor Apex Sarlink® 3490 Thermoplastic Elastomer A NSF certified, medium hardness and multi-purpose thermoplastic elastomer (black and natural color) featuring excellent fluid resistance and high temperature performance. It can be processed by inj..
Density	0.940 g/cc	0.0340 lb/in³	ASTM D 792
Total Lacqtene® 6002 FLG 42 HDPE film  (discontinued **) LACQTENE® 6002 FLG 42 is a medium density polyethylene resin with hexene as comonomer. This shows a broad molecular weight distribution ensuring outstanding processability. LACQTENE® 6002 FLG 42 h..
Density	0.940 g/cc	0.0340 lb/in³	ASTM D792, ISO 3146
DuPont™ Surlyn® 2601B Sodium Ionomer Surlyn® 2601B is available for use in conventional blown, cast film, and sheet extrusion equipment. It is also used in coextrusion equipment designed to process polyethylene and ethylene copolymer ..
Density	0.940 - 0.970 g/cc	0.0340 - 0.0350 lb/in³	Average value: 0.957 g/cc Grade Count:48
Overview of materials for Ionomer, Molded This property data is a summary of similar materials in the MatWeb database for the category "Ionomer, Molded". Each property range of values reported is minimum and maximum values of appropriate Ma..
Density	0.940 g/cc	0.0340 lb/in³	ASTM D792
DuPont™ Surlyn® 9730 Ionomer Resin, Zinc  (discontinued **) Surlyn® 9730 thermoplastic resin is an advanced ethylene/methacrylic acid (E/MAA) copolymer, in which the MAA acid groups have been partially neutralized with zinc ions. The amount of MAA and neutr..
Density	0.940 g/cc	0.0340 lb/in³	ASTM D792, ISO 1183
DuPont Elvax® 3165Z Ethylene Vinyl Acetate  (discontinued **) DuPont™ Elvax® 3165Z is an extrudable ethylene-vinyl acetate copolymer resin available in pellet form for use in conventional extrusion equipment designed to process polyethylene resins. Additives..
Density	0.940 g/cc	0.0340 lb/in³	ASTM D792
DuPont Nucrel® 1214 Ethylene-Methacrylic Acid Copolymer Resin for Extrusion Coating/Laminating  (discontinued 12 wt% Methacrylic Acid.Nucrel® 1214 is an ethylene-methacrylic acid copolymer resin available for use in conventional extrusion coating, coextrusion coating, and extrusion laminating equipment des..