Polymer Property : Density = 1.29 g/cc Product List

Physical Properties

Tips: 30 items are displayed at most.

Physical Properties	Metric	English	Comments
Density	1.29 g/cc	0.0466 lb/in³	ASTM D792
SABIC Innovative Plastics Cycoloy® MC5215 PC+ABS
Density	1.29 g/cc	0.0466 lb/in³	ISO 1183-1
Quadrant EPP Ertalon® 66 GF30 PA 66, 30% glass filled, extruded (ISO Data) Compared with virgin PA 66, this 30 % glass fibre reinforced and heat stabilised nylon grade offers increased strength, stiffness, creep resistance and dimensional stability whilst retaining an exce..
Density	1.29 g/cc	0.0466 lb/in³	ISO 1183
SABIC Innovative Plastics Lexan® BFL2000 PC (Asia Pacific) Non-Brominated, non-chlorinated flame retardant PC. Available in opaque white colors.
Density	1.29 g/cc	0.0466 lb/in³	ISO 1183
Polycasa COPOL PETG QUINN COPOL has good optical properties, brilliant surface, easy to vacuum form without pre-drying, low water absorption, very good chemical resistance, and high impact properties.Bus shelters (UV-v..
Density	1.29 g/cc	0.0466 lb/in³	Compound Property; Arlon SQA-TMS-024
Arlon R36772R008 0.008" (0.203 mm) Fully Cured, Unsupported, Silicone Rubber with Fiberglass Substrate  ( Design/Construction:Side 1: Fully Cured, Unsupported, Silicone Rubber This data Represents typical values for the production material. The data should not be used to write, or in place of, material ..
Density	1.29 - 1.39 g/cc	0.0466 - 0.0502 lb/in³	Average value: 1.34 g/cc Grade Count:8
Overview of materials for Nylon 12, 40% Glass Fiber Filled This property data is a summary of similar materials in the MatWeb database for the category "Nylon 12, 40% Glass Fiber Filled". Specific grades with glass content between 35% and 44% are included. ..
Density	1.29 g/cc	0.0466 lb/inÂ³	ISO 1183
Manifattura Cattaneo PA 6.6 30% GF Nylon, Glass Filled Manifattura Cattaneo products are available in semi-finished forms such as bars, profiles, sheets and plates.Information provided by Manifattura Cattaneo s.p.a.
Density	1.29 g/cc	0.0466 lb/inÂ³	ISO 1183
Lucobit LucobatchÂ® 1850 T20 Polyolefin TPO Granules LucobatchÂ® 1850 T20 is a highly stabilized polyolefin based TPO granules. LucobatchÂ® 1850 T20 is employed as a master batch. Blended with suitable polyolefins, tunnel membranes are built of Lu..
Density	1.29 g/cc	0.0466 lb/inÂ³	ASTM D792
SABIC Innovative Plastics LNP STAT-KON DD0009P PC (Asia Pacific) LNP STAT-KON* DD0009P is a compound based on Polycarbonate resin containing Carbon Powder, Flame Retardant. Added features of this material include: Electrically Conductive.
Density	1.29 g/cc	0.0466 lb/inÂ³	ISO 1183
SABIC Innovative Plastics LNP STAT-KON DX05474 PC (Asia Pacific) LNP* Stat-kon* DX05474 is a compound based on Polycarbonate resin containing Flame Retardant, Carbon Fiber. Added features of this material include: Electrically Conductive, Easy Molding, Flame Ret..
Density	1.29 g/cc	0.0466 lb/inÂ³	ASTM D792
SABIC Innovative Plastics LNP THERMOCOMP DF002H PC LNP THERMOCOMP* DF002H is a compound based on Polycarbonate resin containing 10% Glass Fiber. Added feature includes: Healthcare.
Density	1.29 g/cc	0.0466 lb/inÂ³	ISO 1183
SABIC Innovative Plastics LNP THERMOCOMP IX04513C PA 6/12 (Asia Pacific) LNP THERMOCOMP* IX04513C is a compound based on Nylon 6/12 resin containing Glass Fiber. Added features of this material include: Clean Compounding System.
Density	1.29 - 1.33 g/cc	0.0466 - 0.0480 lb/inÂ³	ASTM D792
Shinkong Synthetic Fibers ShiniteÂ® D201K002 PBT, Low Viscosity Information from Shinkong Synthetic Fibers Corp.
Density	1.29 g/cc	0.0466 lb/inÂ³	ISO 1183
SABIC Innovative Plastics ValoxÂ® V3004 PBT (Asia Pacific) Unfilled PBT modified with elastomer. Targeted for flexible hinge, automotive connectors, film applications.
Density	1.29 - 1.33 g/cc	0.0466 - 0.0480 lb/inÂ³	ASTM D792
Shinkong Synthetic Fibers ShiniteÂ® D201K002 PBT, Low Viscosity Information from Shinkong Synthetic Fibers Corp.
Density	1.29 g/cc	0.0466 lb/inÂ³	ASTM D792
SABIC Innovative Plastics LNP THERMOCOMP QC008 PA6.10 LNP* THERMOCOMP* QC008 is a compound based on Nylon 6/10 containing 40% Carbon Fiber. Added feature of this grade is: Electrically Conductive.
Density	1.29 g/cc	0.0466 lb/in³	ASTM D792
Toyobo VYLOPET® CA5310 PC/PBT Polymer Alloy, High Rigidity, Impact Resistant Applications: Lamp partsHome electric appliance partsFeatures: Fine appearanceHigh rigidityImpact resistantInformation provided by Toyobo.
Density	1.29 g/cc	0.0466 lb/in³
Zircar Ceramics SI-RIG Silica Rigidizer Type SI-RIG Silica Rigidizer is a single part water based colloidal suspension of colloidal silica. It is principally used for rigidizing and hardening the surfaces of ZIRCAR® fibrous ceramic produ..
Density	1.29 g/cc	0.0466 lb/in³	ISO 1183
Polyram PlusTek PB300G4 Nylon 6 for Injection Molding, 20% Glass-Fiber Reinforced 20% Glass fiber reinforced, heat stabilized Nylon 6 for injection molding applications.Information provided by Polyram.
Density	1.29 g/cc	0.0466 lb/in³	ISO 1183
CP-Polymer-Technik Wellamid® 6000 GV 20 HWCP 20% Glass Fiber Nylon 6, Heat Stabilized, Dry Information provided by CP-Polymer-Technik GmbH & Co. KG
Density	1.29 g/cc	0.0466 lb/in³	JIS-Z-8807
Denka REOMER G G5072 Thermoplastic Elastomer, For Extrusion Essentially a thermoplastic elastomer with the characteristics of PVC resin and rubber, with excellent rubber-like elasticity. Offers excellent rubbery characteristics, such as permanent compressive..
Density	1.29 - 1.33 g/cc	0.0466 - 0.0480 lb/in³	ISO R 1183
Fainplast Compounds CL 8315 Flexible PVC, Sheathing Sheath coaxial TV Cable
Density	1.29 g/cc	0.0466 lb/in³	ISO 1183/A
Addiplast Addinyl B2 ZV20 Nylon 6, 20% Glass Filled Glass fiber reinforced, increased thermal aging stabilityInformation provided by Addiplast.
Density	1.29 g/cc	0.0466 lb/in³
A. Schulman ComAlloy Lubrilon® 511 Polycarbonate, Glass Fiber/PTFE, UL Data provided by the manufacturer, ComAlloy International Company. High performance and excellent lubricity with minimal surface wear.The ComAlloy product line has been integrated into the A Schulma..
Density	1.29 g/cc	0.0466 lb/in³	(DAM); ISO 1183
DSM Stanyl® TW200F3 (COND) Nylon 46 15% Glass Reinforced, Heat Stabilized (North America) Information provided by DSM Engineering Plastics.
Density	1.29 g/cc	0.0466 lb/in³	ISO 1183
CENTROPLAST CENTRO HPM Polyphenylensulfone This plastic has very good mechanical, electrical and thermal properties. It has very good hydrolysis resistance, and is suitable for medical, and pharmaceutical equipment construction.Information ..
Density	1.29 g/cc	0.0466 lb/in³
A. Schulman ComAlloy Hiloy® 756 Carbon Fiber Reinforced, Flow Enhanced, PPS Alloy Data provided by the manufacturer, ComAlloy International Company.20% Carbon Fiber Reinforced.The ComAlloy product line has been integrated into the A Schulman product line.
Density	1.29 g/cc	0.0466 lb/in³	ISO 1183
LATI LARIL 13 G/30-V1 30% Glass Fiber Reinforced Polyphenylene Oxide (PPOm) (UL94V-1)  (Unverified Data**) Description: Laril thermoplastics are polyphenylene oxide (PPOm) products. They exhibit excellent toughness, even at low temperatures, good thermal resistance and dimensional stability are the most ..