Polymer Property : Density = 1.75 g/cc Product List

Physical Properties

Tips: 30 items are displayed at most. For the rest of the results, please contact customer service.

Physical Properties	Metric	English	Comments
Density	1.75 g/cc	0.0632 lb/in³	ASTM D792A
Resinoid 1363 Phenolic Molding, Glass Reinforced Data provided by the manufacturer.The Resinoid 1300 and 7000 glass fiber reinforced series compounds feature mechanical strength, dimensional stability, electrical insulation, and heat resistance
Density	1.75 g/cc	0.0632 lb/in³	ASTM D792A
Resinoid 7051 Phenolic Molding, Glass Reinforced Data provided by the manufacturer.The Resinoid 1300 and 7000 glass fiber reinforced series compounds feature mechanical strength, dimensional stability, electrical insulation, and heat resistance
Density	1.75 g/cc	0.0632 lb/in³	ISO 1183
Solvay Specialty Polymers Solef® 32008 PVDF Copolymer (Unverified Data**) Key features of this grade: High Flexibility/ High Elongation/Cold Impact Resistance, Wire & Cable, Plenum, Formulated. Recommended processing is extrusion. Available as powder & granules.General ..
Density	1.75 g/cc	0.0632 lb/in³	ASTM D792
Chevron Phillips Ryton® BR42C Polyphenylene Sulfide Compound (discontinued **) Black Polyphenylene Sulfide CompoundRyton® BR42C is a 40% fiberglass reinforced polyphenylene sulfide compound specially formulated to have a low coefficient of friction for use in low surface fric..
Density	1.75 - 1.90 g/cc	0.0632 - 0.0686 lb/in³	Compounded
Polyphosphazene Rubber (PZ, FZ) FZ refers to the fluorinated (55 wt%) polymer.
Density	1.75 g/cc	0.0632 lb/inÂ³	ASTM D 792
SABIC Innovative Plastics LNP Lubricomp KFL36XXC Acetal Copolymer (Europe-Africa-Middle East) LNP* Lubricomp* KFL36 is an Acetal containing Glass Fiber and PTFE.This data was supplied by SABIC-IP for the Europe-Africa-Middle East region.
Density	1.75 - 1.77 g/cc	0.0632 - 0.0639 lb/inÂ³	ASTM D792
Solvay Specialty Polymers HylarÂ® 5000 Polyvinylidene Fluoride (PVDF) HylarÂ® 5000 is a crystalline high molecular weight powder form of polyvinylidene fluoride (PVDF) specifically designed for solvent-based coatings to provide improved gloss. It forms mechanically ..
Density	1.75 - 1.77 g/cc	0.0632 - 0.0639 lb/inÂ³	Stand relative density
Shandong Dongyue Shenzhou New Material Co DS201 Polyvinylidene Fluoride Powder Conformable with: Q/DYS 014-2007Polyvinylidene fluoride (PVDF) powder (DS201) PVDF is the homopolymer of vinylidene fluoride, which is excellent chemical corrosion-resistant, high temperature resist..
Density	1.75 - 1.80 g/cc	0.0632 - 0.0650 lb/inÂ³	ASTM D792
Solvay Specialty Polymers SolefÂ® 11010 Polyvinylidene Fluoride (PVDF) SolefÂ® 11010 PVDF is a medium-viscosity flexible PVDF copolymer resin and is typically processed by extrusion.Features: Copolymer; Good Flexibility; Medium ViscosityAdditional Properties: Crystal..
Density	1.75 - 1.80 g/cc	0.0632 - 0.0650 lb/inÂ³	ASTM D792
Solvay Specialty Polymers SolefÂ® 21510 Polyvinylidene Fluoride (PVDF) SolefÂ® 21510 PVDF copolymer has medium viscosity and is suitable for extrusion and for solution processing in lithium batteries applications.Features: Copolymer; Good Flexibility; Medium Viscosit..
Density	1.75 g/cc	0.0632 lb/inÂ³	ASTM D792
Techmer ES HiFill FRÂ® PBT GF30 CF10 FR 30/10% Glass/Carbon Filled Availability: North AmericaForms: PelletsFiller/Reinforcement: Glass/Carbon Fiber, 30/10% Filler by WeightFeatures: Flame RetardantUL File Number: E157318Information provided by TP Composites, Inc.
Density	1.75 g/cc	0.0632 lb/inÂ³	ASTM D792
Techmer ES HiFillÂ® PPS GF40 TL13 40% Glass Filled Availability: North AmericaForms: PelletsFiller/Reinforcement: Glass Fiber Reinforcement, 40% Filler by WeightAdditive: PTFE LubricantFeatures: LubricatedInformation provided by TP Composites, Inc.
Density	1.75 g/cc	0.0632 lb/in³	ASTM D792
Unitika RUN35-TA Light resistant PA6, Dry Light resistant and internalInformation provided by Unitika Ltd.
Density	1.75 g/cc	0.0632 lb/in³	ISO 1183
Polyplastics Duranex® CN7130 Polybutylene Terephthalate (PBT), Low friction, Low wear, GF filled DURANEX® is a crystalline thermoplastic based on polybutylene terephthalate (PBT) that can be readily strengthened, modified, or otherwise performance enhanced through the addition of glass fibers ..
Density	1.75 g/cc	0.0632 lb/in³
Toho Tenax Besfight® G30-500 12K HTA-7C EP03 Continuous Filament Carbon Fiber Standard Modulus; Collimated; Polyacrylonitrile (PAN) based fiberTypical values; measured by Toho Strand Test Method based on JIS R7601 for fiber selection purposes. Information provided by Toho Car..
Density	1.75 g/cc	0.0632 lb/in³
Toho Tenax Besfight® G30-500 3K HTA-7C EP03 Continuous Filament Carbon Fiber Standard Modulus; Collimated; Polyacrylonitrile (PAN) based fiberTypical values; measured by Toho Strand Test Method based on JIS R7601 for fiber selection purposes. Information provided by Toho Car..
Density	1.75 g/cc	0.0632 lb/in³
Zoltek Panex 30® High Performance Carbon Yarns High Performance Carbon YarnsApplications include: High Temperature Packings/Gaskets, Pre-forms for carbon-carbon composites, Polymer Composite Reinforcement
Density	1.75 g/cc	0.0632 lb/in³	ASTM D792
Unitika RUN35-TA Light resistant PA6, Conditioned Light resistant and internalInformation provided by Unitika Ltd.
Density	1.75 - 1.79 g/cc	0.0632 - 0.0647 lb/in³	ISO R 1183
Fainplast Compounds CR 85 Flexible PVC, Electrical Bedding Bedding
Density	1.75 g/cc	0.0632 lb/in³
Abatron AboCast/AboCure 8109-2 High melting point. Filled version.Processing: 100/10 pbw; 90 minute potlife; mix at 130-140°C (270 °F); cures in 16 h/120°C (250°F), 10 h/140°C (285°F), 8 h/160°C (320°F), 2 h/ 200°C (390°..
Density	1.75 g/cc	0.0632 lb/in³	ASTM D792 Method A
Arlon 49N Multifunctional Epoxy Low-Flow Prepreg 49N is a low-flow epoxy prepreg engineered for bonding multilayer epoxy rigid-flex or attaching heat sinks to multilayer PCBs. With a high Tg, the prepreg can be used in high-performance or high-te..
Density	1.75 g/cc	0.0632 lb/in³	ISO 1183
BASF Ultramid® HMG14 HS BK 102 60% Glass Filled PA66 (Dry) Description: Ultramid HMG14 HS BK-102 is a 60% glass reinforced, injection molding grade of PA66 offering high strength and stiffness. Due to inherently lower moisture absorption, Ultramid HMG14 HS ..
Density	1.75 - 1.95 g/cc	0.0632 - 0.0704 lb/in³	Molded
Bulk Molding Compounds BMC HT12-1023L Unsaturated Polyester Bulk Molding Compound BMC HT12-1023L is a highly engineered Unsaturated Polyester Bulk Molding Compound developed for automotive under-hood applications. This compound is specified by Ford motor company for solenoid cap..
Density	1.75 g/cc	0.0632 lb/in³	ASTM D792A
Resinoid 1360 Phenolic Molding, Glass Reinforced Data provided by the manufacturer.The Resinoid 1300 and 7000 glass fiber reinforced series compounds feature mechanical strength, dimensional stability, electrical insulation, and heat resistance
Density	1.75 g/cc	0.0632 lb/in³	ASTM D792
Quantum Composites QC-8151C 55% Glass Fiber Vinyl Ester Static-Dissipative SMC (discontinued **) QC-8151C is a vinyl ester sheet molding compound (SMC) designed for compression molding components requiring dimensional stability, resistance to high temperatures plus sufficient electrical conduct..
Density	1.75 g/cc	0.0632 lb/in³
LATI Laticonther 62 CEG/500-V0HF1 PA 6, Glass/Mineral Reinforced, Flame Retardant High thermal conductivity product based on Polyamide 6 (PA6). Glass fibers / Mineral filler. UL94 V-0 classified, halogens-based flame retardants and red phosphorous free. Availability: Africa & Mid..
Density	1.75 g/cc	0.0632 lb/in³	ASTM D792 Method A
Arlon 47N Quick Cure Epoxy Low-Flow Prepreg 47N is a low-flow epoxy prepreg engineered for binding multilayer epoxy rigid-flex or attaching heat sinks to multilayer PCBs. An optional low lamination temperature protects components already mou..
Density	1.75 - 1.85 g/cc	0.0632 - 0.0668 lb/in³	ASTM D792
Premix Premi-Glas® 1200-28 Polyester SMC (discontinued **) Premi-Glas® 1200-28 series is a low profile, 28 % glass reinforced polyester Sheet Molding Compound designed for recreational vehicle body panels applications that require excellent flexibility and..