- HOME
- POLYMER SEARCH
- Polymer Property : Density = 3.80 g/cc
Polymer Property : Density = 3.80 g/cc Product List
Physical PropertiesTips: 30 items are displayed at most.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 3.80 - 4.00 g/cc | 0.137 - 0.145 lb/in³ | ASTM D792 |
|
Polikim EFALON® B-60 PTFE, 60% Bronze Filled
Bronze-filled Efalon® (PTFE) has better heat insulation, less thermal expansion, higher wear resistance properties and less deformation under load compared to virgin Efalon®. Applications: bearing..
|
|||
| Density | 3.80 g/cc | 0.137 lb/in³ | ISO 1183 |
|
Nilit FRIANYL A63 BR80 Nylon 6.6 for injection molding, 80% bronze filled
Nylon 6.6 for injection moldingInformation provided by Frisetta Polymer, which merged into Nilit Plastics
|
|||
| Density | 3.80 g/cc | 0.137 lb/in³ | |
|
Parker Chomerics CHO-FLEX 4430 Conductive Ink
CHO-FLEX polyester inks were developed for the membrane keyboard and sensor industries. The ink bond to Mylar films, and can be creased, heat-formed or scratched without affecting their performance...
|
|||
| Density | 3.80 g/cc | 0.137 lb/in³ | |
|
Parker Chomerics CHO-FLEX 4432 Conductive Ink
CHO-FLEX polyester inks were developed for the membrane keyboard and sensor industries. The ink bond to Mylar films, and can be creased, heat-formed or scratched without affecting their performance...
|
|||
| Density | 3.80 g/cc | 0.137 lb/in³ | |
|
Ferro IP 820 Passivation Glasses (Pb-B-Si-Al; Pb-Si-Al; Si-Pb-Al Silicates)
Glass Type: Pb-Si-Al Typical Powder Form: TF, REG, RWG, SRRG Ferro's passivation glasses are designed for use on transistors, thyristors, and diodes. These products are formulated and produced to a..
|
|||
| Density | 3.80 g/cc | 0.137 lb/in³ | |
|
GBC Grade 98 Alumina
Data provided by the manufacturer, GBC Materials Corporation.
|
|||
| Density | 3.80 g/cc | 0.137 lb/in³ | |
|
Microplasmic Anodizing [Ceramic Coating] for Aluminum, Magnesium, Titanium, Zirconium & Composites
Microplasmic Process is for all types of aluminum, magnesium, titanium and zirconium alloys and composite materials. It is an electrochemical micro arc oxidation process for which a U.S. pat..
|
|||
| Density | 3.80 - 4.60 g/cc | 0.137 - 0.166 lb/in³ | ASTM B417 |
|
H.C. Starck Amperit® 512.059 Agglomerated Sintered Tungsten Carbide - Cobalt (WC-Co) 88-12 |
|||
| Density | 3.80 - 4.50 g/cc | 0.137 - 0.163 lb/in³ | ASTM B212 |
|
H.C. Starck Amperit® 512.074 Agglomerated Sintered Tungsten Carbide - Cobalt (WC-Co) 88-12 |
|||
| Density | 3.80 - 4.40 g/cc | 0.137 - 0.159 lb/in³ | ASTM B212 |
|
H.C. Starck Amperit® 518.001 Agglomerated, Sintered Tungsten Carbide-Cobalt 88-12 (WC-CO) |
|||
| Density | 3.80 - 4.40 g/cc | 0.137 - 0.159 lb/in³ | ASTM B212 |
|
H.C. Starck Amperit® 518.074 Agglomerated, Sintered Tungsten Carbide-Cobalt 88-12 (WC-CO) |
|||
| Density | 3.80 - 4.40 g/cc | 0.137 - 0.159 lb/in³ | ASTM B212 |
|
H.C. Starck Amperit® 526.062 Agglomerated, Sintered Tungsten Carbide-Cobalt (WC-Co) 83-17 |
|||
| Density | 3.80 - 4.40 g/cc | 0.137 - 0.159 lb/in³ | ASTM B212 |
|
H.C. Starck Amperit® 526.074 Agglomerated, Sintered Tungsten Carbide-Cobalt (WC-Co) 83-17 |
|||
| Density | 3.80 - 4.40 g/cc | 0.137 - 0.159 lb/in³ | ASTM B212 |
|
H.C. Starck Amperit® 526.088 Agglomerated, Sintered Tungsten Carbide-Cobalt (WC-Co) 83-17 |
|||
| Density | 3.80 - 4.80 g/cc | 0.137 - 0.173 lb/in³ | ASTM B417 |
|
H.C. Starck Amperit® 544.059 Dense Coated Tungsten Carbide-Nickel 83-17 (WC-Ni) |
|||
| Density | 3.80 - 4.40 g/cc | 0.137 - 0.159 lb/in³ | ASTM B212 |
|
H.C. Starck Amperit® 560.062 Tungsten Carbide-Cobalt(83-17)-Nickel-SF RC 60 50-50 (Wc-Co / NiSF RC 60)
Composition is of NiSF RC 60 only
|
|||
| Density | 3.80 g/cc | 0.137 lb/in³ | |
|
Ferro IP 770 Passivation Glasses (Pb-B-Si-Al; Pb-Si-Al; Si-Pb-Al Silicates)
Glass Type: Pb-Si-Al Typical Powder Form: TF, REG, RWG, SRRG Ferro's passivation glasses are designed for use on transistors, thyristors, and diodes. These products are formulated and produced to a..
|
|||
| Density | 3.80 g/cc | 0.137 lb/in³ | ASTM-C 20 |
|
CoorsTek CAP 4 98.5% Alumina Ceramic Armor Material
CoorsTek CeraShield™ ceramics provide: low weight, high hardness, controlled, uniform microstructure, dimensional stability over wide temperature range, compatibility for use in finished armor sys..
|
|||
| Density | 3.80 g/cc | 0.137 lb/in³ | ASTM-C 20 |
|
CoorsTek FG-98 98% Alumina Ceramic Armor Material
CoorsTek CeraShield™ ceramics provide: low weight, high hardness, controlled, uniform microstructure, dimensional stability over wide temperature range, compatibility for use in finished armor sys..
|
|||
| Density | 3.80 g/cc | 0.137 lb/in³ | ASTM C20 |
|
CoorsTek FG-995 Alumina (nom. 98.5% Al2O3)
Thermal Shock Delta Tc = 200°C - Thermal shock tests are performed by quenching samples in water from different elevated temperatures. Delta Tc is the change in temperature which results in a shar..
|
|||
| Density | 3.80 g/cc | 0.137 lb/in³ | |
|
Cotronics Duralco™ 120 500°F Silver Filled Epoxy, Electrically Conductive
Contains over 70% ultra fine silver to provide excellent electrical conductivity. Cures at room temperature.>Applications: ideal for use where maximum conductivity is required.
|
|||
| Density | 3.80 g/cc | 0.137 lb/in³ | |
|
Arkema Group Rilsan® BMN Y BZ TL Nylon 11, Bronze Bead Filled (Conditioned)
Designation ISO 1874-PA11,MHLS,16-020,(Z+M)(B+D)(80BZ+05)Rigid grade with bronze beads (85%) and molybdenum fillers for injection molding. Available color: steel brown. Light and heat stabilized.No ..
|
|||
| Density | 3.80 g/cc | 0.137 lb/in³ | |
|
Arkema Group Rilsan® BMN Y BZ TL Nylon 11, Bronze Bead Filled (Dry)
Designation ISO 1874-PA11,MHLS,16-020,(Z+M)(B+D)(80BZ+05)Rigid grade with bronze beads (85%) and molybdenum fillers for injection molding. Available color: steel brown. Light and heat stabilized.No ..
|
|||
| Density | 3.80 g/cc | 0.137 lb/in³ | Side 2, Silicone Property; Arlon SQA-TMS-024 |
|
Arlon R36386C035 0.035" (0.889 mm) Uncured/Cured Silicone Rubber with Fiberglass Substrate
Design/Construction: Interleave: Polyethylene Side 1: Cured Silicone Rubber Side 2: Uncured Silicone Rubber (Ferromagnetic Filler) Substrate: Style 7628 Fiberglass This data represents typical value..
|
|||
| Density | >= 3.80 g/cc | >= 0.137 lb/in³ | |
|
Advanced Ceramics ACL 1085 (C-795) Alumina
Information provided by Advanced Ceramics Limited (ACL)
|
|||
| Density | 3.80 - 4.60 g/cc | 0.137 - 0.166 lb/in³ | ASTM B417 |
|
H.C. Starck Amperit® 529.053 Tungsten Carbide - Hastalloy C 85-15 (NiMoCrFeCo) |
|||
| Density | 3.80 - 3.88 g/cc | 0.137 - 0.140 lb/in³ | extruded; ASTM D792 |
|
Guarniflon PTFE G458 Polytetrafluoroethylene 60% Bronze, 2% Carbon
PTFE G Standard Compound with bronzeProperties: Enhanced compressive strength. Good wear resistance and high thermal conductivity.Application: Unlubricated bearings for high speed excluding hard ..
|
|||
| Density | 3.80 - 3.90 g/cc | 0.137 - 0.141 lb/in³ | molded; ASTM D792 |
|
Guarniflon PTFE G458 Polytetrafluoroethylene 60% Bronze, 2% Carbon
PTFE G Standard Compound with bronzeProperties: Enhanced compressive strength. Good wear resistance and high thermal conductivity.Application: Unlubricated bearings for high speed excluding hard ..
|
|||
| Density | 3.80 - 4.40 g/cc | 0.137 - 0.159 lb/in³ | ASTM B212 |
|
H.C. Starck Amperit® 518.054 Agglomerated, Sintered Tungsten Carbide-Cobalt 88-12 (WC-CO) |
|||
| Density | 3.80 - 5.20 g/cc | 0.137 - 0.188 lb/in³ | ASTM B417 |
|
H.C. Starck Amperit® 526.059 Agglomerated, Sintered Tungsten Carbide-Cobalt (WC-Co) 83-17 |
|||
Copyright © lookpolymers.com All Rights Reserved