Polymer Property : Linear Mold Shrinkage = 0.0035 in/in Product List

Physical Properties

Tips: 30 items are displayed at most.

Physical Properties	Metric	English	Comments
Linear Mold Shrinkage	0.0035 cm/cm	0.0035 in/in	With Flow; ISO 2577
Polykemi AB POLYfill PPH GF1030 PD2 Polypropylene Homopolymer, Glass Fibre-Reinforced, Chemically Coupled Information provided by Polykemi AB
Linear Mold Shrinkage	0.0035 cm/cm	0.0035 in/in	With Flow; ISO 2577
Polykemi AB POLYshine PBT D223 GF20 FR PBT, Glass-Fiber Reinforced, Flame Retardant Information provided by Polykemi AB
Linear Mold Shrinkage	0.0035 cm/cm	0.0035 in/in	LATI
LATI LAPEX A G/20 20% Glass Fiber Reinforced Polyethersulfone (PES) (UL94 V-0)  (Unverified Data**) Description: Lapex A compounds are polyethersulfone (PES) products. They are high temperature compounds offering an interesting combination of properties. Lapex A provides outstanding thermal resist..
Linear Mold Shrinkage	0.0035 cm/cm	0.0035 in/in	LATI
LATI LARIL 13-V1KC Mineral Filled Polyphenylene Oxide (PPOm) (UL94V-1)  (Unverified Data**) Description: Laril thermoplastics are polyphenylene oxide (PPOm) products. They exhibit excellent toughness, even at low temperatures, good thermal resistance and dimensional stability are the most ..
Linear Mold Shrinkage	0.0035 cm/cm	0.0035 in/in	Post shrinkage is 0.17% at 72hr 120°C.; ASTM D955
Plenco Valite 697-A Novolac Phenolic, Granular, Compression Molded  (discontinued **) This Valite product has been replaced by Plenco 7697. Data provided by Plenco.VALITE 697-A is a black, two stage, improved impact phenolic molding compound. It has been specifically formulated for ..
Linear Mold Shrinkage	0.0035 cm/cm	0.0035 in/in	ASTM D6289
Sumitomo Bakelite SumikonÂ® PM-9501 Glass-Filled Phenolic, Injection Grade SumikonÂ PM-9501 is a two stage glass fiber and mineral filled black phenolic special purpose molding compound. It is especially designed for applications requiring high strength and dimensional s..
Linear Mold Shrinkage	0.0035 cm/cm	0.0035 in/in	ASTM D955
Plenco 5118 Phenolic, Granular, Injection Molded PLENCO 05118 is a mineral and graphite filled phenolic molding compound, formulated for bearing seals. 05118 provides for a low coefficient of friction, abrasion resistance, minimal water absorptio..
Linear Mold Shrinkage	0.0035 cm/cm	0.0035 in/in	Injection Molding; ISO 2577
Vyncolit X613 Novolac Phenolic Glass fiber filled phenolic molding compound with excellent mechanical and thermal properties. UL listed.USES: Solenoid covers or automotive under-bonnet applications such as: water pumps, impeller..
Linear Mold Shrinkage	0.0035 cm/cm	0.0035 in/in	Injection Molding; ISO 2577
Vyncolit X6151 Novolac Phenolic Glass fiber and mineral filled phenolic molding compound with excellent mechanical and thermal properties. Highest impact, high strain to failure, glycol resistant.USES: Water pumps and water pump ..
Linear Mold Shrinkage	0.0035 cm/cm	0.0035 in/in
Polyram PlusTek RB306G6 Nylon 6, 30% Glass Fiber 30% glass-fiber reinforced. Heat stabilized polyamide 6 for injection molding applicationsInformation provided by Polyram Ram On Ind.
Linear Mold Shrinkage	0.0035 cm/cm	0.0035 in/in	ASTM D955
Adell AW-17 Nylon 66, 35% Glass Reinforced; Superior Finish Data provided by Adell Plastics, Inc.
Linear Mold Shrinkage	0.0035 cm/cm	0.0035 in/in
BASF Ultramid® B3EG6 30% Glass Filled PA6 (Conditioned) Ultramid B3EG6 is a 30% glass fiber reinforced injection molding PA6 grade. It conforms to FDA requirements of 21 CFR 177.1500.
Linear Mold Shrinkage	0.0035 cm/cm	0.0035 in/in
BASF Ultramid® B3EG6 LS BK 23189 30% Glass Filled PA6 (Dry) Information provided by BASF
Linear Mold Shrinkage	0.0035 cm/cm	0.0035 in/in
BASF Ultramid® B3EG7 BK 00564 35% Glass Filled PA6 (Conditioned) Description: 35% Glass fiber reinforced injection molding grade for industrial articles and electrical insulating parts.Information provided by BASF
Linear Mold Shrinkage	0.0035 cm/cm	0.0035 in/in	restricted
BASF Ultramid® B3ZG8 BK 20560 40% Glass Filled PA6-1 (Conditioned) Description: Impact-modified and 40% glass-fiber reinforced injection-molding grade for technical articles of very high stiffness and toughness, for instance, for vehicle airbag housings and suitcas..
Linear Mold Shrinkage	0.0035 cm/cm	0.0035 in/in	restricted
BASF Ultramid® B3ZG8 BK 20560 40% Glass Filled PA6-1 (Dry) Description: Impact-modified and 40% glass-fiber reinforced injection-molding grade for technical articles of very high stiffness and toughness, for instance, for vehicle airbag housings and suitcas..
Linear Mold Shrinkage	0.0035 cm/cm	0.0035 in/in	ASTM D955
Adell AJ-17 Nylon 66, 35% Glass Reinforced; High Impact Data provided by Adell Plastics, Inc.
Linear Mold Shrinkage	0.0035 - 0.0055 cm/cm	0.0035 - 0.0055 in/in	IS 13411-1992
Amity Thermosets ATS 1613-G Phenolic Molding Nylon and inorganic Filler, Compression Molded Characteristics:High dielectric & mechanical strengthWeather resistant Good electric insulationLow water absorption Good mechanical tension bearing capacityColor-blackSoft/Medium flow Applications:R..
Linear Mold Shrinkage	0.0035 cm/cm	0.0035 in/in	LATI
LATI LARTON G/30 30% Glass Fiber Filled Polyphenylene sulfide (PPS)  (discontinued **) Description: Larton thermoplastics are polyphenylene sulfide (PPS) products. They are distinguished by a group of very interesting properties combined with easy moldability. Larton parts feature: ex..
Linear Mold Shrinkage	0.0035 cm/cm	0.0035 in/in	LATI
LATI LARAMID G/35 35% Glass Filled Polyphthalamide (PPA) Based Compound  (Unverified Data**) Laramid compounds are based on a unique semi-crystalline engineering polymer (polyphthalamide) offering improved performance compared to traditional engineering thermoplastics at a lower cost than s..
Linear Mold Shrinkage	0.0035 cm/cm	0.0035 in/in	restricted
BASF Ultramid® B3WG5 25% Glass Filled PA6 (Conditioned) Description: 25% glass-fiber reinforced and heat aging resistant injection-molding grade, for instance, for fan impeller glass-fiber reinforced injection-molding grade for industrial articles and el..
Linear Mold Shrinkage	0.0035 cm/cm	0.0035 in/in
BASF Ultramid® B3WG6 30% Glass Filled PA6 (Conditioned) Ultramid B3WG6 is a 30% glass fiber reinforced, heat stabilized injection molding PA6 grade.
Linear Mold Shrinkage	0.0035 cm/cm	0.0035 in/in
BASF Ultramid® B3WG6 BK00564 30% Glass Filled PA6 (Dry) Ultramid B3WG6 BK00564 is a 30% glass fiber reinforced, pigmented black, heat stabilized injection molding PA6 grade.