Polymer Property : Linear Mold Shrinkage = 0.0060 cm/cm Product List

Physical Properties

Tips: 30 items are displayed at most.

Physical Properties	Metric	English	Comments
Linear Mold Shrinkage	0.0060 - 0.0080 cm/cm	0.0060 - 0.0080 in/in	With Flow; ISO 2577
Polykemi AB POLYabs R00 UV4 ABS, High Impact, UV Stabilized Information provided by Polykemi AB
Linear Mold Shrinkage	0.0060 cm/cm	0.0060 in/in	Across Flow; ISO 2577
Polykemi AB SCANTEC PC S75R GF10 Polycarbonate, Glass Fiber Reinforced Information provided by Polykemi AB
Linear Mold Shrinkage	0.0060 - 0.010 cm/cm	0.0060 - 0.010 in/in	(longitudinal) Compression; ISO 2577
Raschig Group MELOPLAS® 181 MF Cellulose-reinforced, phenol-modified MF molding compound (MPF) in white and colored shades. High surface hardness, good electrical properties, good mechanical strength, high UV and heat resistanc..
Linear Mold Shrinkage	0.0060 - 0.0090 cm/cm	0.0060 - 0.0090 in/in	ASTM D955
Polymer Resources PPX-SF2 Modified PPO, Structural Foam Grade, Standard Flow  (Unverified Data**) Process: Foam MoldingNotes: All physical, mechanical and thermal testing conducted on 1/8-inch thick, un-pigmented, test samples. Foam grades tested with foamed parts with a 10% weight reduction rel..
Linear Mold Shrinkage	0.0060 cm/cm	0.0060 in/in	ASTM D955
Global ABS-406 General Purpose ABS Information provided by Global Polymers Corporation.
Linear Mold Shrinkage	0.0060 cm/cm	0.0060 in/in	ASTM D955
Global PC-FR0 UL Recognized 94V-0 Polycarbonate Information provided by Global Polymers Corporation.
Linear Mold Shrinkage	0.0060 cm/cm	0.0060 in/in	ASTM D955
Global PEI-110 Easy Flow, Polyetherimide Information provided by Global Polymers Corporation.
Linear Mold Shrinkage	0.0060 - 0.010 cm/cm	0.0060 - 0.010 in/in	ASTM D955
Teknor Apex ChemlonÂ® 240 MH Nylon 6, 40% Short Glass Fiber Reinforced Features: Heat Stabilized; Warp Resistant Forms: Pellets Additive: Heat Stabilizer Automotive Specifications: GM GMP.PA6.011Information Provided by Teknor Apex
Linear Mold Shrinkage	0.0060 - 0.010 cm/cm <br>@Thickness 3.20 mm	0.0060 - 0.010 in/in <br>@Thickness 0.126 in	72 hr; ISO 294
A. Schulman FORMION™ FI 392 Ionomer Information provided by A. Schulman.
Linear Mold Shrinkage	0.0060 - 0.018 cm/cm <br>@Thickness 3.20 mm	0.0060 - 0.018 in/in <br>@Thickness 0.126 in	72 hr; ISO 294
A. Schulman FORMION™ FI 105E Non-Reinforced, Extrusion Grade Sodium Ionomer DescriptionFormion® FI 1051E is a non-reinforced, transparent, extrusion grade Sodium Ionomer. It has been formulated for high durability, cut and puncture resistance, and low temperature ductilit..
Linear Mold Shrinkage	0.0060 - 0.018 cm/cm <br>@Thickness 3.20 mm,<br> Time 259000 sec	0.0060 - 0.018 in/in <br>@Thickness 0.126 in,<br> Time 72.0 hour	ISO 294
A. Schulman FORMION™ FI 120E Non-Reinforced, Extrusion Grade Zinc Ionomer DescriptionFormion® FI 120E is a non-reinforced, transparent, extrusion grade Zinc Ionomer. It has been formulate for high durability, cut and puncture resistance, and low temperature ductility.Ap..
Linear Mold Shrinkage	0.0060 - 0.0090 cm/cm	0.0060 - 0.0090 in/in	ASTM D955
Ecomass® 1050CO94 Copper Filled Polyamide Nontoxic alternative to Lead (Pb), weighting and balancing applicationsModerate Specific GravityCopper Powder Filled Polyamide (PA) AlloyGood ToughnessInformation provided by Technical Polymers
Linear Mold Shrinkage	0.0060 cm/cm	0.0060 in/in
Dow Prevail® 3150 ABS + Polyurethane PREVAIL® 3150 thermoplastic resin offers designers and manufacturers a combination of flexibility and low temperature toughness not previously available in an engineering thermoplastic and is used ..
Linear Mold Shrinkage	0.0060 cm/cm	0.0060 in/in
Eurotec® Tecodur® PB70 GR20 NL IH PBT 20% glass fiber reinforced, impact modified Excellent stiffness and hardnessGood mechanical strengthGood creep and fatigue behaviorVery good thermal stabilityExcellent flammability characteristicsGood electrical propertiesHigh wear resistance..
Linear Mold Shrinkage	0.0060 cm/cm	0.0060 in/in
E-Polymers SEPAZ® N5030 Nanoclay 4%, 30% Glass Fiber Reinforced Nano Composite Resin Nanocomposite: SEPAZ Nano PA6 nanocomposites have been prepared successfully in commercial scale through 'in situ' polymerization or melt extrusion. The unique performance properties of nanocomposi..
Linear Mold Shrinkage	0.0060 cm/cm	0.0060 in/in
E-Polymers Tekaloy® G70FR , Flame Retardant, Un-Reinforced PC/ABS Alloy Flame Retardant, Impact ResistanceInformation provided by E-Polymers Co. Ltd.
Linear Mold Shrinkage	0.0060 cm/cm	0.0060 in/in
E-Polymers TEKANATE® G7013 General Purpose Easy Molding Polycarbonate Modified Poly Carbonate: TEKANATE is a modified PC by improving polycarbonate resins with features of halogen-free flammability, transparency, impact resistance and reinforced fiberglass. It shows ..
Linear Mold Shrinkage	0.0060 - 0.0080 cm/cm	0.0060 - 0.0080 in/in	ASTM D955
Asahi Kasei Xyron® X9653 Modified Polyphenylene Ether AutomotiveInformation provided by Asahi Kasei
Linear Mold Shrinkage	0.0060 cm/cm	0.0060 in/in	restricted
BASF Ultramid® KR 4350 PA6/6T (Conditioned) Description: For injection-molding and extrusion, exhibiting high toughness, strength and stiffness, low water absorption, high melting point (295 °C [563°F]). The mechanical properties remain con..
Linear Mold Shrinkage	0.0060 cm/cm	0.0060 in/in	Compression; ASTM D955
Chang Chun Plastic Longlite PM T310 Impact Phenolic Molding Compound ASTM Grade per ASTM D700 is 13.Information provided by Dowell Trading Company Ltd.
Linear Mold Shrinkage	0.0060 cm/cm	0.0060 in/in	ASTM D955
Aaron Industries AAROLENE® ARPS 100-1 GPPS BLACK Polystyrene Compounded Resin AAROLENE® ARPS 100 Series Polystyrene Compounded ResinFeatures: A reprocessed, general-purpose Polystyrene resin, compounded black, specifically designed for all high speed injection molding appli..
Linear Mold Shrinkage	0.0060 - 0.0080 cm/cm	0.0060 - 0.0080 in/in	Across Flow; ISO 2577
Polykemi AB POLYabs H00 ABS, Heat Resistant Information provided by Polykemi AB
Linear Mold Shrinkage	0.0060 cm/cm	0.0060 in/in	Compression; ASTM D955
Plaslok 7021 Black Impact Grade Phenolic Molding Compound  (discontinued **) Plaslok Corporation was purchased by Plastics Engineering Company (maker of Plenco brand materials) in March 2000. The Plaslok name is no longer in use.Plaslok 7021 is the replacement material for ..