Songhan Plastic Technology Co.,Ltd.
 POLYMER SEARCH

Polymer Property : Linear Mold Shrinkage = 0.0090 cm/cm Product List

Physical Properties

Tips: 30 items are displayed at most.
Physical Properties Metric English Comments
Linear Mold Shrinkage 0.0050 - 0.0090 cm/cm
0.0050 - 0.0090 in/in
Rotuba 855, Slow Burning Ethyl Cellulose
Data provided by the manufacturer.
Linear Mold Shrinkage 0.0060 - 0.0090 cm/cm
0.0060 - 0.0090 in/in
ASTM D955
Polymer Resources TP-G30 Polybutylene Terephthalate, 30% Glass Reinforced
Polybutylene Terephthalate, 30% Glass ReinforcedProcess: Injection MoldingNotes: All physical, mechanical and thermal testing conducted on 1/8-inch thick, un-pigmented, test samples.Information prov..
Linear Mold Shrinkage 0.0070 - 0.0090 cm/cm

@Temperature 121 °C,
Time 3600 sec
 0.0070 - 0.0090 in/in

@Temperature 250 °F,
Time 1.00 hour
 48 hours after molding; ISO 294-3/4
Mytex Polymers AS319LW-01US Thermoplastic Polyolefin, 19% Talc Filled
AS319LW-01US is a compounded thermoplastic polyolefin (TPO) designed for exterior automotive applications requiring cold temperature impact, processability and paintability. Available in natural, g..
Linear Mold Shrinkage 0.0060 - 0.0090 cm/cm
0.0060 - 0.0090 in/in
ISO 294-4
Premix Thermoplastics PRE-ELEC® PPE 1462  (discontinued **)
PRE-ELEC PPE 1462 is a conductive thermoplastic compound based on modified polyphenylene ether (PPE). Conductivity is achieved by using special conductive carbon black. In addition to a low electric..
Linear Mold Shrinkage 0.0050 - 0.0090 cm/cm
0.0050 - 0.0090 in/in
Injection; ISO 2257
Raschig Group RALUPOL® 8601 UP
Glass-fiber reinforced polyester molding compound. Mold shrinkage similar to phenolic moulding compounds, low post-shrinkage, good electrical values, excellent heat resistance, good mechanical stren..
Linear Mold Shrinkage 0.0080 - 0.0090 cm/cm
0.0080 - 0.0090 in/in
ASTM D955
Covestro Apec® DP9-9351 High-Heat Polycarbonate, General Purpose  (discontinued **)
Information provided by Bayer Corporation, Plastics DivisionAs of 1 September 2015, Bayer MaterialScience was separated from Bayer AG and has officially adopted its new name – Covestro. This produ..
Linear Mold Shrinkage 0.0040 - 0.0090 cm/cm

@Temperature 23.0 °C
 0.0040 - 0.0090 in/in

@Temperature 73.4 °F
 ASTM D955
Kingfa PA66-G30 30% Glass Fiber Reinforced PA66
Features:Good size stabilityLow tendency to wrapHigh mechanical propertiesGood low temperature resistanceGood surfaceExcellent balance propertiesApplications:Injection moldingAutomobile partsPower t..
Linear Mold Shrinkage 0.0040 - 0.0090 cm/cm

@Temperature 23.0 °C
 0.0040 - 0.0090 in/in

@Temperature 73.4 °F
 ASTM D955
Kingfa PA6-RG30 Flame Retardant, 30% Glass Fiber Reinforced PA6
Features:Flame retardantHigh strengthHigh temperature propertiesGood electric propertiesApplications:Injection moldingConnectorsRelayBobbinsPlugsInformation Provided by Kingfa Sci. & Tech. Co., Ltd...
Linear Mold Shrinkage 0.0050 - 0.0090 cm/cm
0.0050 - 0.0090 in/in
Lehmann & Voss LUVOCOM® 1100-7721/WT9016 Polyether sulfone, unreinforced
Applications: Apparatus- and precision engineering, film- and photo industry, sporting- and leisure goods, medical- and electrical enineering, aircraft- and aerospace industry.High dimensionally sta..
Linear Mold Shrinkage 0.0050 - 0.0090 cm/cm
0.0050 - 0.0090 in/in
ISO 294-4
Wellman Wellamid® GF13-66 22LH-N 13% Glass Fiber Reinforced Nylon 66, Lubricated & Heat Stabilized
Typical Applications: Radio and TV components, dishwasher roller carriages, chain saw oil reservoirs, gears, housings, door & window latches, power hand tool housings, high temperature devices.Data ..
Linear Mold Shrinkage 0.0050 - 0.0090 cm/cm

@Thickness 3.20 mm,
Time 259000 sec
 0.0050 - 0.0090 in/in

@Thickness 0.126 in,
Time 72.0 hour
 ISO 294
A. Schulman FORMION™ FI 233 15% Mineral Reinforced Ionomer / Nylon Alloy
DescriptionFormion® FI 233 is an injection molding grade, 15% mineral reinforced Ionomer / Nylon alloy, which has been formulated for high scratch resistance, heat resistance and high stiffness. A..
Linear Mold Shrinkage 0.0070 - 0.0090 cm/cm
0.0070 - 0.0090 in/in
Bayer Test
Covestro Baydur® 726 IBS Polyurethane Structural Foam RIM, Density 55 pcf, MDI-based 2-Component Liquid System
0.25 in. thickness. IBS = Interactive Blowing System RIM = Reaction Injection MoldingInformation provided by Bayer Corporation, Polyurethanes DivisionAs of 1 September 2015, Bayer MaterialScience ..
Linear Mold Shrinkage 0.0040 - 0.0090 cm/cm
0.0040 - 0.0090 in/in
ASTM D955
Diamond Polymers ABS VP-11 ELG
Description: Extrusion Grade, Low Gloss, Flame RetardantInformation provided by Diamond Polymers, Inc.
Linear Mold Shrinkage 0.0040 - 0.0090 cm/cm
0.0040 - 0.0090 in/in
ASTM D955
Asia International Enterprise (Hong Kong) 60G6 Nylon 66, 30% Filled
Information provided by Asia International Enterprise (Hong Kong) Ltd.
Linear Mold Shrinkage 0.0030 - 0.0090 cm/cm
0.0030 - 0.0090 in/in
ASTM D955
Beijing Ranger Chem PBT-201-G30 211 Flame Retarding FR PBT
Modified PBT Characteristics: Unreinforced grades have abundant strength and flexibility, and have strong characteristics against brittleness. UL-certified slow-burning (94HB) and self-extinguishin..
Linear Mold Shrinkage 0.0040 - 0.0090 cm/cm
0.0040 - 0.0090 in/in
ASTM D955
Beijing Ranger Chem PBT-MFC-G30 FR PBT
Modified PBT Characteristics: Unreinforced grades have abundant strength and flexibility, and have strong characteristics against brittleness. UL-certified slow-burning (94HB) and self-extinguishin..
Linear Mold Shrinkage 0.0050 - 0.0090 cm/cm
0.0050 - 0.0090 in/in
(longitudinal) Compression; ISO 2577
Raschig Group MELOPLAS® 180 MF
Wood flour-reinforced, phenol-modified MF molding compound (MPF) in dark colors. High surface hardness, good mechanical strength and electrical properties, good heat resistance. Self-extinguishing ..
Linear Mold Shrinkage 0.0040 - 0.0090 cm/cm
0.0040 - 0.0090 in/in
ASTM D955
Asia International Enterprise (Hong Kong) 60G6-33GF Nylon 66, 33% Filled
Information provided by Asia International Enterprise (Hong Kong) Ltd.
Copyright © lookpolymers.com All Rights Reserved