- HOME
- POLYMER SEARCH
- Polymer Property : Linear Mold Shrinkage, Flow = 0.014 in/in
Polymer Property : Linear Mold Shrinkage, Flow = 0.014 in/in Product List
Physical PropertiesTips: 30 items are displayed at most.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Linear Mold Shrinkage, Flow | 0.0060 - 0.014 cm/cm | 0.0060 - 0.014 in/in | ASTM D955 |
|
PolyOne Dynaflex™ G7680-9 (Black) Thermoplastic Elastomer (TPE)
Dynaflex™ G7680-9 (Black) is an easy processing, general purpose TPE designed for a wide variety of applications, including those where FDA compliance is required. - Overmold Adhesion to Polypropyl..
|
|||
| Linear Mold Shrinkage, Flow | 0.0060 - 0.014 cm/cm | 0.0060 - 0.014 in/in | ASTM D955 |
|
PolyOne Dynaflex™ G7690-9 (Black) Thermoplastic Elastomer (TPE)
Dynaflex™ G7690-9 (Black) is an easy processing, general purpose TPE designed for a wide variety of applications, including those where FDA compliance is required. - Overmold Adhesion to Polypropyl..
|
|||
| Linear Mold Shrinkage, Flow | 0.0060 - 0.014 cm/cm | 0.0060 - 0.014 in/in | ASTM D955 |
|
PolyOne Dynaflex™ G7690-1 (Natural) Thermoplastic Elastomer (TPE)
Dynaflex™ G7690-1 (Natural) is an easy processing, general purpose TPE designed for a wide variety of applications, including those where FDA compliance is required. - Overmold Adhesion to Polyprop..
|
|||
| Linear Mold Shrinkage, Flow |
0.010
-
0.014
cm/cm <br>@Thickness 3.20 mm
|
0.010
-
0.014
in/in <br>@Thickness 0.126 in
|
ASTM D955 |
|
LG Chemical KEYFLEX BT 5035D Ester Type TPE
Description: Injection Molding, TPC-ET, Specialty, Low Modulus, Black ColorApplication: Automotive Body Plug, FastenerCAS: 37282-12-5 and 1333-86-4Information provided by LG Chemical
|
|||
| Linear Mold Shrinkage, Flow |
0.010
-
0.014
cm/cm <br>@Thickness 3.20 mm
|
0.010
-
0.014
in/in <br>@Thickness 0.126 in
|
ASTM D955 |
|
LG Chemical LUMID GN1001AF PA6, Halogen Free Flame Retardant
Feature: Injection Molding, PA6, Halogen Free Flame RetardantApplication: Electrical & Electronic (Switch)CAS No. 25038-54-4 and 37640-57-6Information provided by LG Chemical
|
|||
| Linear Mold Shrinkage, Flow |
0.010
-
0.014
cm/cm <br>@Thickness 3.20 mm
|
0.010
-
0.014
in/in <br>@Thickness 0.126 in
|
ASTM D955 |
|
LG Chemical LUMID GP1100A(W) PA6, Low Viscosity
Feature: Injection Molding, PA6, Low ViscosityApplication: Industrial Material, Sport PartsCAS No. 25038-54-4Information provided by LG Chemical
|
|||
| Linear Mold Shrinkage, Flow |
0.010
-
0.014
cm/cm <br>@Thickness 3.20 mm
|
0.010
-
0.014
in/in <br>@Thickness 0.126 in
|
ASTM D955 |
|
LG Chemical LUMID GP1200A(W) PA6, Medium Viscosity
Feature: Injection Molding, PA6, Medium ViscosityApplication: Industrial Material, Sport PartsCAS No. 25038-54-4Information provided by LG Chemical
|
|||
| Linear Mold Shrinkage, Flow |
0.010
-
0.014
cm/cm <br>@Thickness 3.20 mm
|
0.010
-
0.014
in/in <br>@Thickness 0.126 in
|
ASTM D955 |
|
LG Chemical LUMID GP1300AP PA6, Plasticized
Feature: Injection Molding, PA6, PlasticizedApplication: Automotive PartsInformation provided by LG Chemical
|
|||
| Linear Mold Shrinkage, Flow |
0.0090
-
0.014
cm/cm <br>@Thickness 3.20 mm
|
0.0090
-
0.014
in/in <br>@Thickness 0.126 in
|
ASTM D955 |
|
LG Chemical LUPOL GP3200 PP+MF20%
Description: Injection Molding, PP+MF10%, General PurposeApplication: Electrical & Electronic, Automotive PartsCAS: 9003-07-0 and 14807-96-6Information provided by LG Chemical
|
|||
| Linear Mold Shrinkage, Flow | 0.0105 - 0.014 cm/cm | 0.0105 - 0.014 in/in | |
|
LATI Latamid 6 H-V0 PA 6, Heat Stabilized, Flame Retardant
Polyamide 6 (PA6) based compound. Heat stabilized. UL94 V-0 classified, halogens-based flame retardants and red phosphorous free. Very good surface appearance.Availability: Africa & Middle East; Asi..
|
|||
| Linear Mold Shrinkage, Flow | 0.0090 - 0.014 cm/cm | 0.0090 - 0.014 in/in | |
|
LATI Laticonther 52/11 CP3/600 F3 PP Homopolymer
High thermal conductivity product based on Polypropylene homopolymer (PPh). Special filler. Potentially suitable for food/medical contact application.Availability: Africa & Middle East; Asia Pacific..
|
|||
| Linear Mold Shrinkage, Flow | 0.011 - 0.014 cm/cm | 0.011 - 0.014 in/in | |
|
LATI Latigray 53/22-01 CX/25 PP Homopolymer, Impact Modified
Radiopaque compound based on Polypropylene homopolymer (PPh), impact modified. Special mineral filler.Availability: Africa & Middle East; Asia Pacific; Europe; Latin America; North AmericaInformatio..
|
|||
| Linear Mold Shrinkage, Flow |
0.012
-
0.014
cm/cm <br>@Time 86400 sec
|
0.012
-
0.014
in/in <br>@Time 24.0 hour
|
ISO 294 |
|
SABIC Innovative Plastics LNP LUBRICOMP PFP36 PA 6 (Asia Pacific)
LNP* PFP36 is a compound based on Nylon 6 containing Glass Fiber and PTFE/Silicone. Characteristics are Impact Modifier.
|
|||
| Linear Mold Shrinkage, Flow | 0.012 - 0.014 cm/cm | 0.012 - 0.014 in/in | on Tensile Bar; SABIC Method |
|
SABIC Innovative Plastics LNP LUBRICOMP RX01075 PA 66 (Europe-Africa-Middle East)
LNP* Lubricomp* RX01075 is a compound based on Nylon 66 resin containing PTFE, Mineral. Added features of this material include: Heat Stabilized.
|
|||
| Linear Mold Shrinkage, Flow |
0.012
-
0.014
cm/cm <br>@Time 86400 sec
|
0.012
-
0.014
in/in <br>@Time 24.0 hour
|
ASTM D 955 |
|
SABIC Innovative Plastics LNP Lubricomp UX06442 PPA (Asia Pacific)
LNP* Lubricomp* UX06442 is a compound based on Polyphthalamide resin containing Proprietary Lubricant. Added features of this material include: Internally Lubricated.This data was supplied by SABIC..
|
|||
| Linear Mold Shrinkage, Flow | 0.012 - 0.014 cm/cm | 0.012 - 0.014 in/in | on Tensile Bar; SABIC Method |
|
SABIC Innovative Plastics ULTEM SILTEM-STM1500 PEI (Europe-Africa-Middle East)
SILTEM STM1500 is a flexible siloxane-polyetherimide copolymer for cable and wire coatings. RoHS compliant.
|
|||
| Linear Mold Shrinkage, Flow |
0.011
-
0.014
cm/cm <br>@Thickness 3.20 mm
|
0.011
-
0.014
in/in <br>@Thickness 0.126 in
|
SABIC Method |
|
SABIC Innovative Plastics Valox® IQ357 PBT+PC
Valox* Resin IQ357: Environmentally responsible, low carbon footprint iQ* PBT + PC alloy. UL94 V-0 @0.63 mm. Impact modified.
|
|||
| Linear Mold Shrinkage, Flow |
0.011
-
0.014
cm/cm <br>@Thickness 3.20 mm
|
0.011
-
0.014
in/in <br>@Thickness 0.126 in
|
SABIC Method |
|
SABIC Innovative Plastics Valox® IQ357M PBT+PC
Valox* Resin IQ357M: Environmentally responsible, low carbon footprint iQ* PBT + PC alloy. UL94 V-0 @0.63 mm. Impact modified, easy flow product with mold release.
|
|||
| Linear Mold Shrinkage, Flow |
0.011
-
0.014
cm/cm <br>@Thickness 3.20 mm
|
0.011
-
0.014
in/in <br>@Thickness 0.126 in
|
SABIC Method |
|
SABIC Innovative Plastics Valox® IQ357U PBT+PC (Asia Pacific)
Valox* Resin IQ357U: Environmentally responsible, low carbon footprint iQ* PBT + PC alloy. UL94 V-0 @0.63 mm. Impact modified and UV stabilized resin.
|
|||
| Linear Mold Shrinkage, Flow |
0.012
-
0.014
cm/cm <br>@Thickness 3.20 mm
|
0.012
-
0.014
in/in <br>@Thickness 0.126 in
|
SABIC Method |
|
SABIC Innovative Plastics NORYL GTX6601 PPE+PA66 (Asia Pacific)
PPE+PA Unfilled GTX
|
|||
| Linear Mold Shrinkage, Flow |
0.010
-
0.014
cm/cm <br>@Thickness 3.20 mm
|
0.010
-
0.014
in/in <br>@Thickness 0.126 in
|
SABIC Method |
|
SABIC Innovative Plastics Valox® 350U PBT (Asia Pacific)
Impact modified, UV stabilised, flame retardant polyester with an internal glowwire rating of 850C on 1.6mm flat plaques.This data was supplied by SABIC-IP for the Asia Pacific region.
|
|||
| Linear Mold Shrinkage, Flow | 0.010 - 0.014 cm/cm | 0.010 - 0.014 in/in | ASTM D955 |
|
Chase Plastics CP Pryme® N300HL (Dry) Nylon 6, Heat Stabilized, Lubricated, Recycled Content
Features: Heat StabilizedLubricatedRecycled contentForm: PelletsInformation provided by Chase Plastics.
|
|||
| Linear Mold Shrinkage, Flow | 0.010 - 0.014 cm/cm | 0.010 - 0.014 in/in | ISO DIS 294-4 |
|
Wellman Wellamid® GFT13-66 XE-NBK1 13% Glass Fiber Reinforced, Impact Modified Nylon 66
Description: Glass Fiber Reinforced, Impact Modified Nylon 66Information provided by Wellman.
|
|||
| Linear Mold Shrinkage, Flow | 0.010 - 0.014 cm/cm | 0.010 - 0.014 in/in | DIS 294-4 |
|
Wellman Wellamid® GS1861-N1(PTFE) Nylon 66, 35% Glass Sphere Reinforced, Enhanced Lubrication
All information provided by Wellman Engineered Resins.
|
|||
| Linear Mold Shrinkage, Flow | 0.010 - 0.014 cm/cm | 0.010 - 0.014 in/in | DIS 294-4 |
|
Wellman Wellamid® MR340 42H-NBK1 Nylon 6, 34% Mineral Reinforced
All information provided by Wellman Engineered Resins.
|
|||
| Linear Mold Shrinkage, Flow | 0.0090 - 0.014 cm/cm | 0.0090 - 0.014 in/in | ASTM D955 |
|
Clariant Renol 6601M Nylon 66, Molybdenum Disulfide Lubricated
Data provided by Clariant Masterbatches
|
|||
| Linear Mold Shrinkage, Flow | 0.011 - 0.014 cm/cm | 0.011 - 0.014 in/in | ISO 294-4 |
|
Polyplastic Armlen® PP MF 40-2HS Polypropylene, 40% Mineral Filled
Impact modified, injection moldingInformation provided by PolyPlastic Group.
|
|||
| Linear Mold Shrinkage, Flow |
0.012
-
0.014
cm/cm <br>@Time 86400 sec
|
0.012
-
0.014
in/in <br>@Time 24.0 hour
|
ISO 294 |
|
SABIC Innovative Plastics LNP Thermotuf PK003EI2 PA 6 (Europe-Africa-Middle East)
LNP* THERMOTUF* PK003EI2 is a compound based on PA 6 resin containing Impact Modifier, Mineral. Added features include High Impact, Easy Molding.This data was supplied by SABIC-IP for the Europe-Afr..
|
|||
| Linear Mold Shrinkage, Flow | 0.011 - 0.014 cm/cm | 0.011 - 0.014 in/in | |
|
LATI Latimass 52/11-04 D008 PP Homopolymer
Specific density compound based on Polypropylene homopolymer (PPh). Special filler. Availability: Africa & Middle East; Asia Pacific; Europe; Latin America; North AmericaInformation provided by Lati..
|
|||
Copyright © lookpolymers.com All Rights Reserved