| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Linear Mold Shrinkage, Flow |
0.015
-
0.019
cm/cm @Thickness 2.00 mm, Temperature 23.0 °C |
0.015
-
0.019
in/in @Thickness 0.0787 in, Temperature 73.4 °F |
Internal Method |
|
PolyOne OnFlex™ HT 70A-3S2103 Thermoplastic Elastomer (TPE)
OnFlex™ HT thermoplastic elastomer compounds are based on hydrogenated styrenic block copolymers. This range of compounds is specially formulated to deliver very good compression set performance at..
|
|||
| Linear Mold Shrinkage, Flow |
0.015
-
0.019
cm/cm @Thickness 3.17 mm |
0.015
-
0.019
in/in @Thickness 0.125 in |
ASTM D955 |
|
Ravago Manufacturing Americas Enviramid™ N1300HL BK/UV2 Post Consumer Recycle Nylon 66
Heat Stabilized, Lubricated, UV Stabilized, Black and made from EnViramid Post Consumer Recycled NylonInformation provided by Ravago.
|
|||
| Linear Mold Shrinkage, Flow |
0.015
-
0.019
cm/cm @Thickness 3.17 mm |
0.015
-
0.019
in/in @Thickness 0.125 in |
ASTM D955 |
|
Ravago Manufacturing Americas Enviramid™ N2300HL BK Post Consumer Recycle Nylon 6
Heat Stabilized, Lubricated, Black, and made from EnViramid™ Post Consumer Recycled NylonInformation provided by Ravago.
|
|||
| Linear Mold Shrinkage, Flow |
0.015
-
0.019
cm/cm @Thickness 3.17 mm |
0.015
-
0.019
in/in @Thickness 0.125 in |
ASTM D955 |
|
Ravago Manufacturing Americas Enviramid™ N2300HL BK/UV2 Post Consumer Recycle Nylon 6
Heat Stabilized, Lubricated, UV Stabilized, Black, and made from EnViramid™ Post Consumer Recycled NylonInformation provided by Ravago.
|
|||
| Linear Mold Shrinkage, Flow |
0.015
-
0.019
cm/cm @Thickness 3.17 mm |
0.015
-
0.019
in/in @Thickness 0.125 in |
ASTM D955 |
|
Ravago Manufacturing Americas Enviramid™ N2300THL BK/HF Post Consumer Recycle Nylon 6
Impact Modified, High Flow, Heat Stabilized, Lubricated, Black and Made from EnViramid Post Consumer Recycled NylonInformation provided by Ravago.
|
|||
| Linear Mold Shrinkage, Flow |
0.014
-
0.019
cm/cm @Thickness 3.17 mm |
0.014
-
0.019
in/in @Thickness 0.125 in |
ASTM D955 |
|
Ravago Manufacturing Americas Hylon® N1000HL Nylon 6/6
Available in North America Additive: Heat Stabilizer and LubricantFeatures: Heat Stabilized and Lubricated RoHS Compliant Auto Specifications: FORD WSK-M4D648-A Color: Black Form: Pellets Processi..
|
|||
| Linear Mold Shrinkage, Flow | 0.013 - 0.019 cm/cm | 0.013 - 0.019 in/in | ASTM D955 |
|
PolyOne Dynaflex™ G2712-1000-02 Thermoplastic Elastomer (TPE)
Dynaflex™ G2712-1000-02 is an easy processing TPE designed for injection molding and extrusion aplications that require FDA compliance. - Excellent Colorability - Good Ozone and UV Stability - High..
|
|||
| Linear Mold Shrinkage, Flow | 0.013 - 0.019 cm/cm | 0.013 - 0.019 in/in | ASTM D955 |
|
PolyOne Dynaflex™ G7950-1 NSFG Thermoplastic Elastomer (TPE)
Dynaflex™ G7950-1 NSFG is a NSF 51 (food equipment) approved material suitable for a wide variety of applications. -NSF 51 approved -FDA (see Notes) -Overmold Adhesion to Polypropylene -Soft Touch,..
|
|||
| Linear Mold Shrinkage, Flow | 0.013 - 0.019 cm/cm | 0.013 - 0.019 in/in | ASTM D955 |
|
PolyOne Dynaflex™ G7950-1001-00 Thermoplastic Elastomer (TPE)
Dynaflex™ G7950-1001-00 is an easy processing, general purpose material designed for a wide variety of applications, including those where FDA compliance is required. - Overmold Adhesion to Polypro..
|
|||
| Linear Mold Shrinkage, Flow | 0.013 - 0.019 cm/cm | 0.013 - 0.019 in/in | ASTM D955 |
|
PolyOne Dynaflex™ G7950-9 NSFG Thermoplastic Elastomer (TPE)
Dynaflex™ G7950-9 NSFG is a NSF 51 (food equipment) approved material suitable for a wide variety of applications. -NSF 51 approved -FDA (see Notes) -Overmold Adhesion to Polypropylene -Soft Touch,..
|
|||
| Linear Mold Shrinkage, Flow | 0.015 - 0.019 cm/cm | 0.015 - 0.019 in/in | ASTM D955 |
|
PolyOne Geon™ Vinyl Flexible A8000 Polyvinyl Chloride, Flexible (PVC, Flexible)
Recommended for interior applications.Information provided by PolyOne
|
|||
| Linear Mold Shrinkage, Flow | 0.011 - 0.019 cm/cm | 0.011 - 0.019 in/in | ASTM D955 |
|
PolyOne Dynaflex™ G7650-9 (Black) Thermoplastic Elastomer (TPE)
Dynaflex™ G7650-9 (Black) is an easy processing, general purpose TPE designed for a wide variety of applications, including those where FDA compliance is required. - Overmold Adhesion to Polypropyl..
|
|||
| Linear Mold Shrinkage, Flow |
0.015
-
0.019
cm/cm @Thickness 3.17 mm |
0.015
-
0.019
in/in @Thickness 0.125 in |
ASTM D955 |
|
Ravago Manufacturing Americas Enviramid™ N1300HL Nylon 66
Heat Stabilized, Lubricated, Black and made from EnViramid™ Post Consumer Recycled NylonInformation provided by Ravago.
|
|||
| Linear Mold Shrinkage, Flow |
0.015
-
0.019
cm/cm @Thickness 3.17 mm |
0.015
-
0.019
in/in @Thickness 0.125 in |
ASTM D955 |
|
Ravago Manufacturing Americas Enviramid™ N1300THL BK Post Consumer Recycle Nylon 66
Impact Modified, Heat Stabilized, Lubricated, Black and Made from EnViramid Post Consumer Recycled NylonInformation provided by Ravago.
|
|||
| Linear Mold Shrinkage, Flow |
0.015
-
0.019
cm/cm @Thickness 3.17 mm |
0.015
-
0.019
in/in @Thickness 0.125 in |
ASTM D955 |
|
Ravago Manufacturing Americas Enviramid™ N2300THL BK Post Consumer Recycle Nylon 6
Impact Modified, Heat Stabilized, Lubricated, Black and Made from EnViramid Post Consumer Recycled NylonInformation provided by Ravago.
|
|||
| Linear Mold Shrinkage, Flow |
0.015
-
0.019
cm/cm @Thickness 3.20 mm |
0.015
-
0.019
in/in @Thickness 0.126 in |
ASTM D955 |
|
LG Chemical KEYFLEX BT 1072D Ester Type TPE
Description: Injection Molding, TPC-ET, General Purpose, High ModulusApplication: Injection Parts for Automotives, Leisure & SportsCAS: 37282-12-5Information provided by LG Chemical
|
|||
| Linear Mold Shrinkage, Flow |
0.015
-
0.019
cm/cm @Thickness 3.20 mm |
0.015
-
0.019
in/in @Thickness 0.126 in |
ASTM D955 |
|
LG Chemical KEYFLEX BT 1172D Ester Type TPE
Description: Injection Molding, TPC-ET, General Purpose, High ModulusApplication: Cable & Wire Jackets, Hose & Tubing, SheetCAS: 37282-12-5Information provided by LG Chemical
|
|||
| Linear Mold Shrinkage, Flow | 0.016 - 0.019 cm/cm | 0.016 - 0.019 in/in | |
|
LATI Latigray 75/4-01 CX/45 PBT
Radiopaque compound based on Polybutylene Terephthalate (PBT). Special mineral filler. Availability: Africa & Middle East; Asia Pacific; Europe; Latin America; North AmericaInformation provided by L..
|
|||
| Linear Mold Shrinkage, Flow | 0.0155 - 0.019 cm/cm | 0.0155 - 0.019 in/in | |
|
LATI Latilub 73/13-10T Y/15 POM, 15% Aramid Fiber Reinforced, PTFE Filled
Self-lubricating product based on Polyoxymethylene (POM). PTFE. Aramid fibersAvailability: Africa & Middle East; Asia Pacific; Europe; Latin America; North AmericaInformation provided by Lati Indust..
|
|||
| Linear Mold Shrinkage, Flow | 0.017 - 0.019 cm/cm | 0.017 - 0.019 in/in | on Tensile Bar; SABIC Method |
|
SABIC Innovative Plastics LNP LUBRICOMP RL002 PA 66 (Europe-Africa-Middle East)
LNP* Verton* RL002 is a compound based on Nylon 66 resin containing PTFE.
|
|||
| Linear Mold Shrinkage, Flow |
0.012
-
0.019
cm/cm @Thickness 3.20 mm |
0.012
-
0.019
in/in @Thickness 0.126 in |
SABIC Method |
|
SABIC Innovative Plastics Valox® 7062 PBT+PET (Europe-Africa-Middle East)
Valox 7062 is Mineral filled PBT injection molding grade.
|
|||
| Linear Mold Shrinkage, Flow |
0.012
-
0.019
cm/cm @Thickness 3.20 mm |
0.012
-
0.019
in/in @Thickness 0.126 in |
SABIC Method |
|
SABIC Innovative Plastics Valox® 7062HP PBT
ENDURAN 7062HP is a 38% mineral filled & FDA compliance injection moulding resin.
|
|||
| Linear Mold Shrinkage, Flow | 0.0060 - 0.019 cm/cm | 0.0060 - 0.019 in/in | ASTM D955 |
|
Shinkong Synthetic Fibers Shinite® D202 PBT, Fire Retardant
Information from Shinkong Synthetic Fibers Corp.
|
|||
| Linear Mold Shrinkage, Flow | 0.015 - 0.019 cm/cm | 0.015 - 0.019 in/in | on Tensile Bar; SABIC Method |
|
SABIC Innovative Plastics NORYL GTX GTX914 PPE+PA
NORYL GTX914 is an unfilled GTX grade with an ideal combination of impact performance, dimensional stability at elevated temperatures, chemical resistance and processability.
|
|||
| Linear Mold Shrinkage, Flow | 0.0060 - 0.019 cm/cm | 0.0060 - 0.019 in/in | ASTM D955 |
|
Shinkong Synthetic Fibers Shinite® D202 PBT, Fire Retardant
Information from Shinkong Synthetic Fibers Corp.
|
|||
| Linear Mold Shrinkage, Flow | 0.015 - 0.019 cm/cm | 0.015 - 0.019 in/in | DIS 294-4 |
|
Wellman Wellamid® FR1841-BK1 Nylon 66, Unfilled, Flame Retardant
All information provided by Wellman Engineered Resins.
|
|||
| Linear Mold Shrinkage, Flow | 0.015 - 0.019 cm/cm | 0.015 - 0.019 in/in | DIS 294-4 |
|
Wellman Wellamid® FR1841-N1 Nylon 66, Unfilled, Flame Retardant
All information provided by Wellman Engineered Resins.
|
|||
| Linear Mold Shrinkage, Flow | 0.017 - 0.019 cm/cm | 0.017 - 0.019 in/in | ISO DIS 294-4 |
|
Wellman Wellamid® NY1733-GY1 Lubricated, Nucleated, Unfilled Nylon 6
Description: Lubricated, Nucleated, Unfilled Nylon 6Information provided by Wellman.
|
|||
| Linear Mold Shrinkage, Flow | 0.015 - 0.019 cm/cm | 0.015 - 0.019 in/in | ISO DIS 294-4 |
|
Wellman Wellamid® XT1486-BK Medium Impact Nylon 66
Description: Medium Impact Nylon 66Information provided by Wellman.
|
|||
| Linear Mold Shrinkage, Flow | 0.017 - 0.019 cm/cm | 0.017 - 0.019 in/in | ASTM D955 |
|
Solvay Specialty Polymers Amodel® AT-1001L Polyphthalamide (PPA)
(Unverified Data**)
Amodel AT-1001L is an unreinforced, impact modified polyphthalamide (PPA) resin that exhibits exceptional impact strength at temperatures ranging from room temperature to as low as -40°F (-40°C), ..
|
|||