Polymer Property : Specific Gravity = 2.16 g/cc Product List

Physical Properties

Tips: 30 items are displayed at most.

Physical Properties	Metric	English	Comments
Specific Gravity	2.16 g/cc	2.16 g/cc
Saint-Gobain NorslideÂ® EKO-V PTFE Sliding Tubing Features/Benefits:Low stick-slip effectMaintenance free, no lubrication requiredWeatherproofIsolates noise, dampens vibrationFlexible and resilientResistant against fuel, oil, and greasesService tem..
Specific Gravity	2.16 g/cc	2.16 g/cc	Part A
Master Bond Super Gel 9AOND Dimensionally Stable Urethane Modified Epoxy Master Bond Super Gel 9AOND is a two component, urethane modified epoxy system that cures at room temperature and has a paste-like consistency. It offers softness and retains dimensional stability. ..
Specific Gravity	2.16 g/cc <br>@Temperature 25.0 °C	2.16 g/cc <br>@Temperature 77.0 °F
Dow Corning SE 4402 KIT One-part, grey, heat cure, good flowability, thermally conductive, controlled volatility.Information provided by Dow Corning
Specific Gravity	2.16 g/cc	2.16 g/cc	@ 23°C, Sintering Molding; ASTM D4894-98a
3M Dyneon™ TFM™ 1600 PTFE Meets ASTM D4894 Type III, Grade 2 resinMolding and ram extrusion powder with very good free flowing propertiesGood metering propertiesGood mold filling behaviorImproved particle coalescenceDenser p..
Specific Gravity	2.16 g/cc	2.16 g/cc	@ 23°C, Sintering Molding; ASTM D4894-98a
3M Dyneon™ TFM™ 1700 PTFE Meets ASTM D4894 Type III, Grade 1 resinNon-free-flowing compression molding powderVery fine particle sizeDense polymer structure, low permeabilityImproved weldabilityLow deformation under loadGood ..
Specific Gravity	2.16 g/cc	2.16 g/cc	@ 23°C, Sintering Molding; ASTM D4894-98a
3M Dyneon™ TFM™ 1705 PTFE Non-free-flowing resinReduced, adjusted melt viscosityIncreased gel stabilityReduced cold flowLower porosity and permeabilityLower void contentExcellent non-stick and dielectric propertiesHigher ela..
Specific Gravity	2.16 - 2.17 g/cc	2.16 - 2.17 g/cc	ASTM D792
Adamas Adalon® 508 PTFE, 1% MoS2 Information provided by Adamas, HPM
Specific Gravity	2.16 g/cc	2.16 g/cc
Asahi Glass Fluon® CD123 PTFE Coagulated Dispersion Powder Fluon®PTFE coagulated dispersion powders (fine powders) are used for paste extrusion to make tapes, tubes, rods and wire coatings.Information provided by Asahi Glass Company, Inc.
Specific Gravity	2.16 g/cc	2.16 g/cc	@ 23°C, Sintering Molding; ASTM D4894-98a
3M Dyneon™ TF 1750 PTFE Meets ASTM D4894 Type IINon-free-flowing powder gradeVery fine particle sizeGood electrical and mechanical propertiesLow molding pressureUsed in large billet moldingExcellent for production of very ..
Specific Gravity	2.16 g/cc	2.16 g/cc	@ 23°C, Sintering Molding; ASTM D4894-98a
3M Dyneon™ TFM™ 1630 PTFE  (discontinued **) Semi-free-flowing resin for convenient handlingHigh bulk density leading to more economical processingVery dense polymer structure; low permeabilityGood electrical and mechanical propertiesSmoother ..
Specific Gravity	2.16 g/cc	2.16 g/cc	ASTM D4894-98a
3M Dyneon™ TFM™ X 1630 PTFE  (discontinued **) Semi-free-flowing resin for convenient handlingHigh bulk density leading to more economical processingVery dense polymer structure; low permeabilityGood electrical and mechanical propertiesSmoother ..