Songhan Plastic Technology Co.,Ltd.
 POLYMER SEARCH

Polymer Property : Melt Flow = 1.0 g/10 min Product List

Physical Properties

Tips: 30 items are displayed at most.
Physical Properties Metric English Comments
Melt Flow 1.0 g/10 min

@Load 2.16 kg,
Temperature 230 °C
 1.0 g/10 min

@Load 4.76 lb,
Temperature 446 °F
 ASTM D1238
RheTech Products CC40P100-00EG 40% Calcium Carbonate Reinforced Polypropylene, Natural, Extrusion Grade
Applications: Consumer goodsInjection molding conditions reported in table.Information provided by RheTech Products.
Melt Flow 1.0 g/10 min

@Load 0.325 kg,
Temperature 270 °C
 1.0 g/10 min

@Load 0.716 lb,
Temperature 518 °F
Plastcom SLOVAMID 66 GF 25 FRI 2 PA66, 25% glass fibre, flame retardant
FeaturesPA 66 for injection moulding, chemically reinforced with 25% glass fibre and non-halogen flame retardant, with heat resistance and nonflammability, achieves V 0 in accordance with UL 94. Non..
Melt Flow <= 1.0 g/10 min

@Load 5.00 kg,
Temperature 190 °C
 <= 1.0 g/10 min

@Load 11.0 lb,
Temperature 374 °F
 ASTM D1238
Polimeri Europa Europrene® SOL T 6306 Styrene - Butadiene Block Copolymer
Europrene® SOL T 6306 is a radial block copolymer obtained by anionic polymerization. The polymer is based on styrene and butadiene, where bound styrene is 37% weight. A non-staining antioxidant ..
Melt Flow 1.0 - 6.0 g/10 min
1.0 - 6.0 g/10 min
ASTM D1238
Polymer Resources PC/TP-GP2-G20 PC Polyester, Excellent Chemical Resistance, 20% Glass Filled &nbsp;(Unverified
Process: Injection MoldingNotes: All physical, mechanical and thermal testing conducted on 1/8-inch thick, un-pigmented, test samples. Information provided by Polymer Resources Corporation.
Melt Flow 1.0 g/10 min

@Load 2.16 kg,
Temperature 190 °C
 1.0 g/10 min

@Load 4.76 lb,
Temperature 374 °F
 condition E; ASTM D1238
DuPont™ Surlyn® 8527 Ionomer Resin, Sodium &nbsp;(discontinued **)
Surlyn® 8527 thermoplastic resin is an advanced ethylene/methacrylic acid (E/MAA) copolymer, in which the MAA acid groups have been partially neutralized with sodium ions. The amount of MAA and neu..
Melt Flow 1.0 - 2.0 g/10 min
1.0 - 2.0 g/10 min
Kazanorgsintez 107-22 Composition of Low Density Polyethylene, Crack-Proof
Production Method: Composition is achieved on the basis of grades 10204-003, 15303-003, 10703-020 and formulas of additives 15, 16, 17, 18, 19, 20, 21, 22, and 23. Application: Intended for prod..
Melt Flow 1.0 g/10 min
1.0 g/10 min
190/2.16; ASTM D1238
LyondellBasell Petrothene® GA501020 Linear Low Density Polyethylene
ApplicationsPETROTHENE GA 501series of resins are pelletized linear low density polyethylene for film extrusion applications requiring excellent drawdown and toughness. These resins have excellent ..
Melt Flow 1.0 g/10 min
1.0 g/10 min
190/2.16; ASTM D1238
LyondellBasell Petrothene® GA501023 Linear Low Density Polyethylene
ApplicationsPETROTHENE GA 501series of resins are pelletized linear low density polyethylene for film extrusion applications requiring excellent drawdown and toughness. These resins have excellent ..
Melt Flow <= 1.0 g/10 min

@Load 5.00 kg,
Temperature 200 °C
 <= 1.0 g/10 min

@Load 11.0 lb,
Temperature 392 °F
 ISO 1133
Kraton® D1186 A (SBS) Branched Block Copolymer
Description: Kraton D1186 A is a clear, branched block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied from Europe in the physical forms identified as follows..
Melt Flow 1.0 g/10 min

@Load 2.16 kg,
Temperature 230 °C
 1.0 g/10 min

@Load 4.76 lb,
Temperature 446 °F
 ASTM D1238
Multibase Multi-Flex® A 8502 LC TPE Thermoplastic Elastomer
Features: Chemical Resistance, Good Thermal Stability, GoodOzone Resistant Forms:PelletsProcessing Method:Injection MoldingExtrusion Uses: Automotive Interior PartsInformation provided by Multiba..
Melt Flow 1.0 - 6.0 g/10 min

@Load 5.00 kg,
Temperature 190 °C
 1.0 - 6.0 g/10 min

@Load 11.0 lb,
Temperature 374 °F
 DIN 53735
Stanelco Bioplast® GF 106 Biodegradable Plastic
Bioplast 106 is a versatile soft product, suitable for blown film extrusion of completely biodegradable products. Many customers find it is a natural replacement for LDPE. Made from potato starch m..
Melt Flow 1.0 g/10 min

@Load 10.0 kg,
Temperature 230 °C
 1.0 g/10 min

@Load 22.0 lb,
Temperature 446 °F
 ASTM D1238
Techmer ES Statiblend® PA6 02012
Availability: North AmericaForms: PelletsFiller/Reinforcement: Unspecified FillerReinforFeatures: ConductiveUL File Number: E157318TPCI# 1038102Information provided by TP Composites, Inc.
Melt Flow 1.0 g/10 min

@Load 5.00 kg,
Temperature 200 °C
 1.0 g/10 min

@Load 11.0 lb,
Temperature 392 °F
 ASTM D1238
Teknor Apex MONPRENE® MP 2730 Thermoplastic Elastomer
Information provided by Teknor Apex Company
Melt Flow 1.0 g/10 min
1.0 g/10 min
ASTM D1238
Westlake Hifor LT74119 Linear Low Density Polyethylene
WESTLAKE HIFOR Polyethylene LT74119 is a high strength linear low density polyethylene containing medium slip and high antiblock and it contains processing aid. It is designed for blown film applic..
Melt Flow 1.0 g/10 min
1.0 g/10 min
ASTM D1238
Westlake Hifor SC74557 Linear Low Density Polyethylene
WESTLAKE Hifor Clear Polyethylene SC74557 is a high strength and high clarity linear low density polyethylene designed for blown film extrusion that contains no slip and low antiblock. Films produc..
Melt Flow 1.0 g/10 min

@Load 2.16 kg,
Temperature 190 °C
 1.0 g/10 min

@Load 4.76 lb,
Temperature 374 °F
 ASTM D1238 - ISO 1133
DuPont Elvaloy® 2112 AC Ethylene and 12% Ethyl Acrylate Copolymer
Elvaloy® 2112 AC is intended for profile and tube extrusion. Its good chemical resistance, low temperature toughness and good flex life make it outstanding for tubing is various applications. The..
Melt Flow 1.0 - 3.0 g/10 min

@Load 2.16 kg,
Temperature 190 °C
 1.0 - 3.0 g/10 min

@Load 4.76 lb,
Temperature 374 °F
Unitika TERRAMAC HV-6250H Polylactic Acid (PLA)
Foam, Extrusion, blow, and foam sheet grades. Bio-based materials produced from annually renewable raw materials.Information provided by Unitika Ltd.
Melt Flow 1.0 g/10 min

@Load 2.16 kg,
Temperature 190 °C
 1.0 g/10 min

@Load 4.76 lb,
Temperature 374 °F
 ASTM D1238
ExxonMobil Exceed™ 1018KB Metallocene Polyethylene Resin (European Grade)
Product Description: Exceed 1018KB is a metallocene ethylene-hexene copolymers. Films are made of Exceed 1018KB resin have outstanding tensile, impact strength and puncture. These superior strength ..
Melt Flow 1.0 g/10 min

@Load 2.16 kg,
Temperature 190 °C
 1.0 g/10 min

@Load 4.76 lb,
Temperature 374 °F
 ASTM D1238
ExxonMobil LLDPE LL 1001.32 Linear Low Density Polyethylene Resin
Product Description: LL 1001.32 is a butane LLDPE resin. Films made from LL 1001.32 have very good tensile and toughness properties.Availability: Latin America, North America and South America Addit..
Melt Flow 1.0 g/10 min

@Load 5.00 kg,
Temperature 200 °C
 1.0 g/10 min

@Load 11.0 lb,
Temperature 392 °F
 Procedure A Condition G; ASTM D1238
Diamond Polymers ABS 3501E
Description: Extrusion Grade, High ImpactInformation provided by Diamond Polymers, Inc.
Melt Flow <= 1.0 g/10 min

@Load 10.0 kg,
Temperature 230 °C
 <= 1.0 g/10 min

@Load 22.0 lb,
Temperature 446 °F
 ASTM D1238
Diamond Polymers NPP25-0103 CF15 Conductive Copolymer Polypropylene
Information Provided by Diamond Polymers, Inc. & Network Polymers, Inc.
Melt Flow <= 1.0 g/10 min

@Load 10.0 kg,
Temperature 230 °C
 <= 1.0 g/10 min

@Load 22.0 lb,
Temperature 446 °F
 ASTM D1238
Diamond Polymers NPP25-1111 CF15 Conductive Copolymer Polypropylene
Information Provided by Diamond Polymers, Inc. & Network Polymers, Inc.
Melt Flow 1.0 g/10 min

@Load 2.16 kg
 1.0 g/10 min

@Load 4.76 lb
 Melt flow ratio I10/I2 is 9.
Dow AFFINITY™ PL 1880 Polyolefin Plastomer
AFFINITY® PL 1880 polyolefin plastomer is an ethylene alpha-olefin resin designed for use in a variety of demanding packaging applications including high-speed, form-fill seal products. AFFINITY PL..
Melt Flow 1.0 g/10 min
1.0 g/10 min
ASTM D1238
Dow FLEXOMER™ ETS-9064 NT 7, 0.8 mil Very Low Density Polyethylene (VLDPE) Resin
FLEXOMER™ ETS-9064 NT 7 is intended for use in single of multi-layer blown-film constructions or thick sheets. Films extruded from ETS-9064 NT 7 have a high tear strength, high impact strength, an..
Melt Flow 1.0 g/10 min

@Load 2.16 kg,
Temperature 190 °C
 1.0 g/10 min

@Load 4.76 lb,
Temperature 374 °F
 ASTM D1238
Braskem Flexus® 9200 Blown Film Extrusion Polyethylene
Description: Flexus 9200 is a LLDPE hexene copolymer produced through metallocene catalyst which presents excellent impact and puncture strength, beyond a differential sealing performance comparing ..
Melt Flow 1.0 g/10 min

@Load 2.16 kg,
Temperature 190 °C
 1.0 g/10 min

@Load 4.76 lb,
Temperature 374 °F
 ASTM D1238
Braskem LL 118/21 LLDPE Blown Film Extrusion Polyethylene
38µm film gauge, obtained in 40mm extruder, with blow up ratio 2, 2:1Applications: Automatic packaging (FFS); "liners"; general purpose; HDPE and LDPE blends. Information provided by Braskem
Melt Flow 1.0 g/10 min
1.0 g/10 min
ASTM D1238
ExxonMobil Exceed™ 1018 EA Blown Film Resin &nbsp;(discontinued **)
Exceed 1018 resins are hexene copolymer produced using ExxonMobil Chemicals Exxpol® Technology. Films made from 1018 resins have outstanding tensile properties and impact and puncture toughness. ..
Melt Flow 1.0 g/10 min

@Load 2.16 kg,
Temperature 190 °C
 1.0 g/10 min

@Load 4.76 lb,
Temperature 374 °F
 ASTM D1238
NOVA Chemicals Novapol® TF-0119-FP Hexene LLDPE Film Resin &nbsp;(discontinued **)
Film Properties. Features: High strength and toughness, low gel count, intended for narrow die gaps.Applications: Stretch wrap, blend resin.Data provided by the manufacturer.
Melt Flow 1.0 g/10 min

@Load 2.16 kg,
Temperature 190 °C
 1.0 g/10 min

@Load 4.76 lb,
Temperature 374 °F
 ASTM D1238
Eastman E6838-975F Polyethylene &nbsp;(discontinued **)
E6838-975F is a low density formulation with medium slip and medium antiblock. The formula is used in general purpose packaging where impact strength and processability are important. End-use film..
Copyright © lookpolymers.com All Rights Reserved