- HOME
- POLYMER SEARCH
- Polymer Property : Melt Flow = 1.0 g/10 min
Polymer Property : Melt Flow = 1.0 g/10 min Product List
Physical PropertiesTips: 30 items are displayed at most.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Melt Flow | 1.0 g/10 min | 1.0 g/10 min | (Condition L) ASTM D-1238 |
|
Multibase Multi-Flex® TPE D 4701 GREY
The burn rate is 0.9 in/min (23 mm/min) based on ASTM FM VSS 302. Multi-Flex TPE contains Kraton™ G.Data provided by Multibase.
|
|||
| Melt Flow | 1.0 g/10 min | 1.0 g/10 min | (Condition L) ASTM D-1238-94a |
|
Multibase Multi-Flex® TPO D-6500
Multi-Flex® D 6500 is well suited for TPO extrusion applications and certain high value molded parts for the telecommunications industry.Data provided by Multibase.
|
|||
| Melt Flow |
1.0
g/10 min @Load 0.325 kg, Temperature 270 °C |
1.0
g/10 min @Load 0.716 lb, Temperature 518 °F |
|
|
Plastcom SLOVAMID 6 GF 25 FRC 3 PA6, 25% glass fibre, flame retardant
FeaturesPA 6 for injection moulding, chemically strengthened with 25 % glass fibre. Application: impacted mouldings and mouldings with high strength applied in automotive, electrical, engineering an..
|
|||
| Melt Flow |
1.0
g/10 min @Load 0.325 kg, Temperature 270 °C |
1.0
g/10 min @Load 0.716 lb, Temperature 518 °F |
|
|
Plastcom SLOVAMID 6 GF 50 LS PA6, 50% glass fibre, light stability
FeaturesPA 6 for injection moulding, chemically strengthened with 50% of glass fibre, for mouldings with high strength and toughness used in the automotive, electrical, engineering and consumer-good..
|
|||
| Melt Flow |
1.0
g/10 min @Load 2.16 kg, Temperature 230 °C |
1.0
g/10 min @Load 4.76 lb, Temperature 446 °F |
|
|
Plastcom SLOVAMID 6 GF 65/1M PA6 reinforced with 65% glass fibre
Features: PA 6 for injection moulding, chemically strengthened with 65% of glass fibre, for mouldings with high strength and toughness used in the automotive, electrical, engineering and consumer-go..
|
|||
| Melt Flow |
1.0
g/10 min @Load 2.16 kg, Temperature 230 °C |
1.0
g/10 min @Load 4.76 lb, Temperature 446 °F |
ASTM D1238 |
|
RheTech Products T10P102-00EG 10% Talc Reinforced Polypropylene, Extrusion Grade, Natural
Injection molding conditions reported in table.Information provided by RheTech Products.
|
|||
| Melt Flow |
1.0
g/10 min @Load 21.6 kg, Temperature 190 °C |
1.0
g/10 min @Load 47.6 lb, Temperature 374 °F |
ISO 1133 |
|
Premix Thermoplastics PRE-ELEC® PE 1200 Conductive Thermoplastic Compound
PRE-ELEC® PE 1200 is a conductive thermoplastic masterbatch/compound based on PE-HD. Conductivity is achieved by using special conductive carbon black. PRE-ELEC® PE 1200 has a high concentration o..
|
|||
| Melt Flow | 1.0 - 3.0 g/10 min | 1.0 - 3.0 g/10 min | ASTM D1238 |
|
Polymer Resources AH-GP1-[color]-H Acetal Homopolymer, Low Flow, High Melt Strength, Heat Stabilized
Process: Molding or ExtrusionNotes: All physical, mechanical and thermal testing conducted on 1/8-inch thick, un-pigmented, test samples. Information provided by Polymer Resources Corporation.
|
|||
| Melt Flow |
1.0
g/10 min @Load 2.16 kg, Temperature 230 °C |
1.0
g/10 min @Load 4.76 lb, Temperature 446 °F |
STN EN ISO 1133 |
|
Plastcom SLOVAMID 6 GF 50 Polyamide 6, 50% Glass Fiber
FeaturesPA 6 for injection moulding, chemically strengthened with 50% of glass fiber, for mouldings with high strength and toughness used in the automotive, electrical, engineering and consumer-good..
|
|||
| Melt Flow |
1.0
g/10 min @Load 5.00 kg, Temperature 190 °C |
1.0
g/10 min @Load 11.0 lb, Temperature 374 °F |
ISO 1133 |
|
Premix Thermoplastics PRE-ELEC® CP 1318
(discontinued **)
PRE-ELEC CP 1318 is a conductive thermoplastic compound based on a polyolefin copolymer. Conductivity is achieved by using special conductive carbon black. In addition to a low electrical resistivit..
|
|||
| Melt Flow | 1.0 g/10 min | 1.0 g/10 min | ExxonMobil Method |
|
ExxonMobil Exceed™ 1018CA Premium Blown Film Resin
(discontinued **)
Exceed 1018CA is a hexene copolymer produced using ExxonMobil Chemicals EXXPOL® Technology. Films made from 1018CA have outstanding tensile, impact strength and puncture. These superior strength ..
|
|||
| Melt Flow | 1.0 - 4.0 g/10 min | 1.0 - 4.0 g/10 min | ASTM D1238 |
|
Polymer Resources PPX-FRG20 Modified PPO, UL 94 V-1, 20% Glass Reinforced
(Unverified Data**)
Process: Injection MoldingNotes: All physical, mechanical and thermal testing conducted on 1/8-inch thick, un-pigmented, test samples. Information provided by Polymer Resources Corporation.
|
|||
| Melt Flow |
1.0
g/10 min @Load 10.0 kg, Temperature 190 °C |
1.0
g/10 min @Load 22.0 lb, Temperature 374 °F |
ISO 1133 |
|
Premix Thermoplastics PRE-ELEC® PE 1313
(discontinued **)
PRE-ELEC PE 1313 is a conductive thermoplastic compound based on PE-LLD. Conductivity is achieved by using special conductive carbon black. In addition to a low electrical resistivity PRE-ELEC PE 13..
|
|||
| Melt Flow | 1.0 g/10 min | 1.0 g/10 min | ASTM D1238 |
|
Huntsman PE 1011 Film Extrusion Polyethylene
(discontinued **)
Homopolymer, Drug Master File listed product, and FDA compliant.Features: Good impact strength, good machinability, heat seal and foaming characteristicsApplications: Film Extrusion: industrial line..
|
|||
| Melt Flow | 1.0 g/10 min | 1.0 g/10 min | ISO 1133 |
|
LATI LATAN 3E71 Polyoxymethylene Copolymer (POM) with Elastomer
(Unverified Data**)
Description: Latan series thermoplastics are polyoxymethylene copolymer (POM) products. The main applications for Latan feature good wear resistance, chemical inertness and low water absorption (gea..
|
|||
| Melt Flow |
<=
1.0
g/10 min @Load 5.00 kg, Temperature 200 °C |
<=
1.0
g/10 min @Load 11.0 lb, Temperature 392 °F |
ISO 1133 |
|
Kraton® D1101 A (SBS) Liner Block Copolymer
Description: Kraton D1101 A polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 31% mass. It is supplied from Europe in the physical forms identified as f..
|
|||
| Melt Flow | <= 1.0 g/10 min | <= 1.0 g/10 min | ISO 37 |
|
Kraton® D1101 J (SBS) Liner Block Copolymer
Description: Kraton D1101 J is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 31% mass. It is supplied from Japan in the physical form(s) outlined in the follow..
|
|||
| Melt Flow |
<=
1.0
g/10 min @Load 5.00 kg, Temperature 200 °C |
<=
1.0
g/10 min @Load 11.0 lb, Temperature 392 °F |
ISO 1133 |
|
Kraton® D1186 A (SBS) Branched Block Copolymer
Description: Kraton D1186 A is a clear, branched block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied from Europe in the physical forms identified as follows..
|
|||
| Melt Flow |
<=
1.0
g/10 min @Load 5.00 kg, Temperature 200 °C |
<=
1.0
g/10 min @Load 11.0 lb, Temperature 392 °F |
|
|
Kraton® D1133 K (SBS) Linear Triblock Copolymer
Description: Kraton D1133 K is a clear, linear triblock copolymer based on styrene and butadiene, with a polystyrene content of 36%. It is supplied from North America in the physical form identified..
|
|||
| Melt Flow |
1.0
g/10 min @Load 2.16 kg, Temperature 230 °C |
1.0
g/10 min @Load 4.76 lb, Temperature 446 °F |
ASTM D1238 |
|
Samyang Triel® 5401BM Thermoplastics Polyetherester Elastomer, Blow Molding
Excellent mechanical characteristics, elasticity, thermal resistance and chemical resistance.5401BM is for blow molding applications.Applications: Automotive - CVJB and BellowsInformation provided ..
|
|||
| Melt Flow | 1.0 g/10 min | 1.0 g/10 min | ASTM D1238 |
|
Westlake Hifor LT74119 Linear Low Density Polyethylene
WESTLAKE HIFOR Polyethylene LT74119 is a high strength linear low density polyethylene containing medium slip and high antiblock and it contains processing aid. It is designed for blown film applic..
|
|||
| Melt Flow | 1.0 g/10 min | 1.0 g/10 min | ASTM D1238 |
|
Westlake LF2020 Hexene Linear Low Density Polyethylene
Westlake LF2020 is a hexene LLDPE with excellent physical properties and heat sealing characteristics, which allow for down-gauging and blending with other materials. Typical applications include s..
|
|||
| Melt Flow |
1.0
g/10 min @Load 5.00 kg, Temperature 190 °C |
1.0
g/10 min @Load 11.0 lb, Temperature 374 °F |
ASTM D1238 |
|
ELASTO UK Dryflex® 650450 TPE, Improved Compression Set and High Temperature Resistance, 45A Hardness
The VTC TPE Group have developed endless formulations to fulfill different properties and application requirements to optimize the finished component. This grade is designed with improved compressi..
|
|||
| Melt Flow |
1.0
g/10 min @Load 2.16 kg, Temperature 190 °C |
1.0
g/10 min @Load 4.76 lb, Temperature 374 °F |
ASTM D1238 |
|
ExxonMobil Enable™ 20-10CB Metallocene Polyethylene Resin
Product Description: Enable 20-10 resins are metallocene ethylene-hexane copolymers. Enable mPE resins offer an outstanding balance between processing and film properties, including tensile, impact ..
|
|||
| Melt Flow | 1.0 g/10 min | 1.0 g/10 min | ExxonMobil Method |
|
ExxonMobil LD 312.82 High Impact Film Resin
LD 312 Series films have superior impact strength, good heat sealability, and good low temperature properties. Applications include frozen and other food packaging.Information provided by ExxonMobi..
|
|||
| Melt Flow | 1.0 g/10 min | 1.0 g/10 min | ASTM D1238 |
|
Dow DOWLEX™ 2045.11G Linear Low Density Polyethylene
For high speed, thin film applications Additional thermal stability Complies with U.S. FDA 21 CFR 177.1520 (c) 3.2a Information provided by Dow
|
|||
| Melt Flow |
1.0
g/10 min @Load 2.16 kg |
1.0
g/10 min @Load 4.76 lb |
Melt flow ratio I10/I2 is 8. |
|
Dow DOWLEX™ 2245D Linear Low Density Polyethylene, Heavy Duty Film Grade
DOWLEX® 2245D Polyethylene resin is a premier film resin for heavy duty applications. DOWLEX 2245D resin is used where improved thermal stability over a broad range of processing conditions is nece..
|
|||
Copyright © lookpolymers.com All Rights Reserved