Polymer Property : Melt Flow = 13 g/10 min Product List

Physical Properties

Tips: 30 items are displayed at most.

Physical Properties	Metric	English	Comments
Melt Flow	13 g/10 min @Load 2.16 kg, Temperature 190 °C	13 g/10 min @Load 4.76 lb, Temperature 374 °F	ISO 1133
Polimeri Europa Clearflex® MQ B0 Very Low Density Polyethylene Clearflex MQ B0 is a linear polyethylene, with antioxidants, characterized by a very low density (VLDPE).The resin shows an excellent balance between flexibility and impact resistance.Main Applicati..
Melt Flow	13 g/10 min @Load 2.16 kg, Temperature 260 °C	13 g/10 min @Load 4.76 lb, Temperature 500 °F	ASTM D1238
SABIC Innovative Plastics Cycoloy® C7122 PC+ABS (Asia Pacific) Cycoloy*C7122 is a mineral filled, non-halogenated flame retardant PC/ABS. Good stiffness with balanced flow and impact performance.
Melt Flow	13 g/10 min @Load 5.00 kg, Temperature 260 °C	13 g/10 min @Load 11.0 lb, Temperature 500 °F	[cm^3/10 min] Melt Volume Rate; ISO 1133
SABIC Innovative Plastics Cycoloy® CY6414 PC+ABS (Europe-Africa-Middle East) This data was supplied by SABIC-IP for the Europe-Africa-Middle East region.
Melt Flow	13 g/10 min @Load 2.16 kg, Temperature 260 °C	13 g/10 min @Load 4.76 lb, Temperature 500 °F	[cm^3/10 min] Melt Volume Rate; ISO 1133
SABIC Innovative Plastics Cycoloy® FXC630FE PC+ABS (Europe-Africa-Middle East) Multi purpose flame retarded PC+ABS injection moulding grade, suitable for those applications that require ferrite colour effects.This data was supplied by SABIC-IP for the Europe-Africa-Middle East..
Melt Flow	13 g/10 min @Load 1.20 kg, Temperature 300 °C	13 g/10 min @Load 2.65 lb, Temperature 572 °F	ASTM D1238
SABIC Innovative Plastics Lexan® 925A PC (Asia Pacific) Lexan* 925A Polycarbonate (PC) resin is a non-filled, injection moldable grade of non-chlorinated, non-brominated flame retardant systems that has an UL-94 V0 rating. Lexan 925A is available in tran..
Melt Flow	13 g/10 min @Load 10.0 kg, Temperature 220 °C	13 g/10 min @Load 22.0 lb, Temperature 428 °F
Ineos ABS Lustran® 2863  (discontinued **) Special grade for smart cards.Information provided by Bayer.LANXESS was spun-off from Bayer in early 2005. Business renamed Ineos ABS after INEOS acquires a majority shareholding under a JV with La..
Melt Flow	13 g/10 min @Load 2.16 kg, Temperature 230 Â°C	13 g/10 min @Load 4.76 lb, Temperature 446 Â°F	ISO 1133
Inno-Comp INNOPOLÂ® CS 2-3120 BPLU 9H0017 20% Talc-Filled, UV Stabilized Polypropylene Block-Copolymer INNOPOLÂ® CS 2-3120 BPLU 9H0017 is a 20% talc filled, UV stabilized compound based on polypropylene block-copolymer.INNOPOLÂ® CS 2-3120 BPLU 9H0017 is developed for producing injection molded au..
Melt Flow	13 g/10 min @Load 2.16 kg, Temperature 230 Â°C	13 g/10 min @Load 4.76 lb, Temperature 446 Â°F	ASTM D1238
LG Chemical LUPOL GP3102Y PP+MF10%, High Impact, High Flow Description: Injection Molding, PP+MF10%, General Purpose, High Impact, High FlowApplication: Electrical & Electronic, Automotive PartsCAS: 9003-07-0 and 14807-96-6Information provided by LG Chemica..
Melt Flow	13 g/10 min @Load 6.60 kg, Temperature 337 Â°C	13 g/10 min @Load 14.6 lb, Temperature 639 Â°F	ASTM D1238
SABIC Innovative Plastics ULTEM 2210EPR PEI 20% Glass fiber filled, high flow Polyetherimide (Tg 217C) with internal mold release and enhanced electroplatability. ECO Conforming, UL94 V0 and 5VA listing.
Melt Flow	13 g/10 min @Load 10.0 kg, Temperature 250 Â°C	13 g/10 min @Load 22.0 lb, Temperature 482 Â°F	ASTM D1238
Samsung Cheil Industries StarexÂ® VB-4921 ABS, Glass Filled FR Information provided by Samsung Cheil Industries.
Melt Flow	13 g/10 min @Load 5.00 kg, Temperature 200 Â°C	13 g/10 min @Load 11.0 lb, Temperature 392 Â°F	ASTM Test
Styrolution Styrolux HS 70 SBC Information provided by STYROLUTION, which is a joint venture between BASF and INEOS.
Melt Flow	13 g/10 min @Load 2.16 kg, Temperature 250 Â°C	13 g/10 min @Load 4.76 lb, Temperature 482 Â°F	[cm^3/10 min] Melt Volume Rate; ISO 1133
SABIC Innovative Plastics ValoxÂ® V3500EX PBT PBT, Flame Retardant, Heat Stabilized, Extrusion grade for monofilament/Fiber ApplicationThis data was supplied by SABIC-IP for the Americas region.
Melt Flow	13 g/10 min @Load 1.20 kg, Temperature 300 Â°C	13 g/10 min @Load 2.65 lb, Temperature 572 Â°F	ASTM D1238
Styron EMERGEâ„¢ 4701-13 Polycarbonate EMERGEâ„¢ PC 4701-13 advanced resin is formulated with 10% glass fiber and a proprietary flame retardant package. It provides good ignition resistance, rigidity, dimension stability and heat res..
Melt Flow	13 g/10 min @Load 2.16 kg, Temperature 190 °C	13 g/10 min @Load 4.76 lb, Temperature 374 °F
Wico Plast Wicotal 130 Acetal ApplicationsInjection moldingAll information provided by Wico Plast, Warenhandelsges. mbH
Melt Flow	13 g/10 min @Load 2.16 kg, Temperature 230 °C	13 g/10 min @Load 4.76 lb, Temperature 446 °F	ASTM D1238
A. Schulman POLYFORT™ FPP 1434 Couple Mica In Copolymer Polypropylene (25% Mineral Filled) DescriptionPolyfort® FPP 1434 is a 25% coupled mica copolymer polypropyleneInformation provided by A. Schulman.
Melt Flow	13 g/10 min @Load 2.16 kg, Temperature 230 °C	13 g/10 min @Load 4.76 lb, Temperature 446 °F	ISO 1133
Borealis Borpact™ SE920MO Polypropylene Homopolymer for Injection Molding Borpact SE920MO is a high impact and transparent polypropylene. Borpact SE920MO is a new generation polypropylene having properties that were earlier not possible to combine. Borpact SE920MO offers..
Melt Flow	13 g/10 min @Load 5.00 kg, Temperature 260 °C	13 g/10 min @Load 11.0 lb, Temperature 500 °F	ASTM D 1238
Cossa Polimeri ESTABLEND 8500 Polycarbonate ABS Blend Polycarbonate and Acrylonitrile Butadiene Styrene blendHigh thermal resistance, high impact resistanceInformation provided by Cossa Polimeri S.r.l.
Melt Flow	13 g/10 min @Load 1.20 kg, Temperature 300 °C	13 g/10 min @Load 2.65 lb, Temperature 572 °F	ISO 1133
Covestro Makrolon® 2665 MAS071 Polycarbonate Main characteristics:• High toughness• Good heat resistance• Glass-like transparency, optical quality• High dimensional accuracy and stabilityGrade characteristics:• Flame retardant• Med..
Melt Flow	13 g/10 min @Load 2.16 kg, Temperature 230 °C	13 g/10 min @Load 4.76 lb, Temperature 446 °F	ASTM D1238
ExxonMobil PP1024E4 Homopolymer Product Description: Medium melt flow rate homopolymer. Particularly suitable for general purpose injection moldingAvailability: North America Features:Autoclave SterilizableEthylene Oxide Steriliz..
Melt Flow	13 g/10 min @Load 1.20 kg, Temperature 300 °C	13 g/10 min @Load 2.65 lb, Temperature 572 °F	ISO 1133
Covestro Makrolon® ET2613 Polycarbonate Main characteristics:• High toughness• Good heat resistance• Glass-like transparency, optical quality• High dimensional accuracy and stabilityGrade characteristics:• Extrusion• Medium vi..
Melt Flow	13 g/10 min	13 g/10 min	ASTM D1238
Aclo Accutech Polycarbonate POL050G30L Glass Reinforced
Melt Flow	13 g/10 min @Load 2.16 kg, Temperature 190 °C	13 g/10 min @Load 4.76 lb, Temperature 374 °F	ISO 1133
Barlog Plastics KEBAFORM C 1090 POM Copolymer, 10% glass fiber reinforced POM-GF10Information provided by BARLOG plastics GmbH.
Melt Flow	13 g/10 min @Load 2.16 kg, Temperature 190 °C	13 g/10 min @Load 4.76 lb, Temperature 374 °F	ISO 1133
BASF Ultraform® S2320 0035 POM Description: Is a POM, free-flowing and rapidly solidifying standard grade with improved impact strength for injection molding.Information provided by BASF
Melt Flow	13 g/10 min @Load 10.0 kg, Temperature 220 °C	13 g/10 min @Load 22.0 lb, Temperature 428 °F	ASTM D-1238
Bhansali Engineering Abstron IMC-45 ABS-PC Alloy ABS-polycarbonate alloys for High service temperature applications.Information provided by Bhansali
Melt Flow	13 g/10 min	13 g/10 min	ASTM D1238
Tipco Tipcolene® MD-TPE MD TPE - Impact Modified Polypropylene Copolymer Compound for Automobile Bumpers High Impact PP CopolymerApplications: Automotive BumpersProcessing: Injection MoldingInformation provided by the Manufacturer, Tipco Industries Ltd., India.
Melt Flow	13 g/10 min	13 g/10 min	ASTM D1238
Asahi Kasei Thermofil P-10CC-Y488 10% Calcium Carbonate Reinforced, Heat Stabilized Information provided by Asahi Thermofil
Melt Flow	13 g/10 min @Load 2.16 kg, Temperature 250 °C	13 g/10 min @Load 4.76 lb, Temperature 482 °F	Calculated from Volume Flow Rate of 10 cm<sup>3</sup>/10min.; ISO 1133
DSM Arnite® T08 200 (extrusion) T08 200 PBT (European and Asian Grade)  (discontinued **) Arnite resins are engineered to provide specific performance in applications where DSM technology can offer value.Arnite Molding resins: Standard Unfilled and Reinforced materialsHigh modulus Flame ..
Melt Flow	13 g/10 min @Load 3.80 kg, Temperature 230 °C	13 g/10 min @Load 8.38 lb, Temperature 446 °F	ASTM D1238
PlastxWorld CEVIAN® SER20 ABS General purpose and flame retarded ABS with excellent moldability and no plate-out.These are typical values and are not intended for specification purposes. UL approved file No. is E47773. Informat..