Polymer Property : Melt Flow = 15 g/10 min Product List

Physical Properties

Tips: 30 items are displayed at most.

Physical Properties	Metric	English	Comments
Melt Flow	8.0 - 15 g/10 min	8.0 - 15 g/10 min	(Condition L) ASTM D-1238
Multibase Multi-Flex® TPE A 6821 C BLK The burn rate is 1 in/min (25 mm/min) based on ASTM FM VSS 302. Multi-Flex TPE contains Kraton™ G.Data provided by Multibase.
Melt Flow	10 - 15 g/10 min	10 - 15 g/10 min	(Condition L) ASTM D-1238
Multibase Multi-Flex® TPE A 7318 BLK The burn rate is 1 in/min (25 mm/min) based on ASTM FM VSS 302. Multi-Flex TPE contains Kraton™ G.Data provided by Multibase.
Melt Flow	10 - 15 g/10 min	10 - 15 g/10 min	(Condition L) ASTM D-1238
Multibase Multi-Flex® TPE A 7318 GREY The burn rate is 1 in/min (25 mm/min) based on ASTM FM VSS 302. Multi-Flex TPE contains Kraton™ G.Data provided by Multibase.
Melt Flow	5.0 - 15 g/10 min @Load 2.16 kg, Temperature 230 °C	5.0 - 15 g/10 min @Load 4.76 lb, Temperature 446 °F	STN EN ISO 1133
Plastcom PLASTALEN® PH 52 T 20 003/1M Polypropylene reinforced with 20% mineral filler PP homopolymer for injection molding with the content of 20 % mineral filler, heat stabilized. Application in automotive industry. Delivered in black grade.Information Provided by Plastcom spol. s r..
Melt Flow	10 - 15 g/10 min @Load 2.16 kg, Temperature 230 °C	10 - 15 g/10 min @Load 4.76 lb, Temperature 446 °F	ASTM D1238/L
NIZHNEKAMSKNEFTEKHIM PP 1500N (F30G) Propylene Homopolymer Product obtained by polymerization of propylene in presence of complex metalorganic catalysts. It incorporates increased long-term thermal stability, thermal-oxidative degradation resistance when P..
Melt Flow	10 - 15 g/10 min @Load 2.16 kg, Temperature 230 °C	10 - 15 g/10 min @Load 4.76 lb, Temperature 446 °F	ASTM D1238/L
NIZHNEKAMSKNEFTEKHIM PP 8300N Propylene and Ethylene Block Polymer Product obtained by copolymerization of propylene with ethylene in presence of complex metalorganic catalysts. It incorporates increased long-term thermal stability, thermal-oxidative degradation r..
Melt Flow	5.0 - 15 g/10 min	5.0 - 15 g/10 min	ASTM D1238
Polymer Resources PC/TP-GP1-[color]-3 PC Polyester, High Impact, Good Chemical Resistance, UV-stabilized Process: Injection MoldingNotes: All physical, mechanical and thermal testing conducted on 1/8-inch thick, un-pigmented, test samples. Information provided by Polymer Resources Corporation.
Melt Flow	10 - 15 g/10 min @Load 2.16 kg, Temperature 250 °C	10 - 15 g/10 min @Load 4.76 lb, Temperature 482 °F	ASTM D1238
Polymer Resources TP-M30 Polybutylene Terephthalate, 30% Mineral Reinforced, Reduced Warpage Polybutylene Terephthalate, 30% Mineral Reinforced, Reduced WarpageProcess: Injection MoldingNotes: All physical, mechanical and thermal testing conducted on 1/8-inch thick, un-pigmented, test sampl..
Melt Flow	5.0 - 15 g/10 min	5.0 - 15 g/10 min	ASTM D1238
Polymer Resources PC/TP-GP1 PC Polyester, High Impact, Good Chemical Resistance  (Unverified Data**) Process: Injection MoldingNotes: All physical, mechanical and thermal testing conducted on 1/8-inch thick, un-pigmented, test samples. Information provided by Polymer Resources Corporation.
Melt Flow	10 - 15 g/10 min	10 - 15 g/10 min	230/2.16 (typical); ASTM D1238
FiberfilÂ® PP-61/CC/20 Polypropylene Copolymer, 20% Calcium Carbonate Information provided by FIBERFIL Engineered Plastics
Melt Flow	10 - 15 g/10 min	10 - 15 g/10 min	230/2.16 (typical); ASTM D1238
FiberfilÂ® PP-62/CC/20/UV Polypropylene Copolymer, 20% Calcium Carbonate, UV Stabilized Information provided by FIBERFIL Engineered Plastics
Melt Flow	10 - 15 g/10 min @Load 2.16 kg, Temperature 230 Â°C	10 - 15 g/10 min @Load 4.76 lb, Temperature 446 Â°F	ASTM D1238
Ineos H12SLME Polypropylene Homopolymer This is a homopolymer designed for injection molding, and it is compliant with both the FDA status and the EU Food Contact status.Information provided by Ineos Olefins & Polymers USA
Melt Flow	5.0 - 15 g/10 min @Load 2.16 kg, Temperature 150 Â°C	5.0 - 15 g/10 min @Load 4.76 lb, Temperature 302 Â°F
Taiwan Sheen Soon SheenthaneÂ® AH-660 TPU for Hotmelt Adhesive Thermoplastic polyurethane elastomer for hard hotmelt adhesiveExcellent bonding strength for polyester, TPU, nylon, PVC, leather, fabrics, etc. Melt flow may be customized. Used for hot melt adhes..
Melt Flow	5.0 - 15 g/10 min @Load 2.16 kg, Temperature 150 Â°C	5.0 - 15 g/10 min @Load 4.76 lb, Temperature 302 Â°F
Taiwan Sheen Soon SheenthaneÂ® AH-810 TPU for Hotmelt Adhesive Thermoplastic polyurethane elastomer for hotmelt adhesiveNon-yellowing, aliphatic gradeExcellent bonding strength for polyester, TPU, nylon, PVC, leather, fabrics, etc. Melt flow may be customized...
Melt Flow	5.0 - 15 g/10 min @Load 2.16 kg, Temperature 150 Â°C	5.0 - 15 g/10 min @Load 4.76 lb, Temperature 302 Â°F
Taiwan Sheen Soon SheenthaneÂ® AH-853 TPU for Hotmelt Adhesive Thermoplastic polyurethane elastomer for hard hotmelt adhesiveExcellent bonding strength for polyester, TPU, nylon, PVC, leather, fabrics, etc. Melt flow may be customized. Used for hot melt adhes..
Melt Flow	8.0 - 15 g/10 min	8.0 - 15 g/10 min	ASTM D1238
A. Schulman POLYFORT™ PP 2801 Homopolymer Polypropylene DescriptionPolyfort® PP 2801 is a 12 melt flow homopolymer polypropylene based on the same ingredients as Eastman P4G4Z-001. It is compounded on equipment and under conditions as close as possible..
Melt Flow	8.0 - 15 g/10 min	8.0 - 15 g/10 min	ASTM D1238
A. Schulman POLYFORT™ PP 2801 Homopolymer Polypropylene DescriptionPolyfort® PP 2801 is a 12 melt flow homopolymer polypropylene based on the same ingredients as Eastman P4G4Z-001. It is compounded on equipment and under conditions as close as possible..
Melt Flow	8.0 - 15 g/10 min	8.0 - 15 g/10 min	ASTM D1238
A. Schulman POLYFORT™ PP 2801 Homopolymer Polypropylene DescriptionPolyfort® PP 2801 is a 12 melt flow homopolymer polypropylene based on the same ingredients as Eastman P4G4Z-001. It is compounded on equipment and under conditions as close as possible..
Melt Flow	5.0 - 15 g/10 min @Load 8.70 kg, Temperature 175 °C	5.0 - 15 g/10 min @Load 19.2 lb, Temperature 347 °F
Lubrizol ESTANE® GP75AE Ester Based Thermoplastic Polyurethane Type: Estane® GP 75AE is an aromatic polyester-based thermoplastic polyurethane (TPU).Appearance: Translucent spherical pelletsUses: Injection molding partsAvailable in EuropeInformation provided b..
Melt Flow	12 - 15 g/10 min	12 - 15 g/10 min	ISO 1133
Chengdu Polyster H6055 Thermoplastic Polyether-ester Elastomer (TPEE) Medium modulus molding and injection grade. Contains improved color- stable antioxidants. Higher melt flow index compared with other grades; good balance of modulus and toughness. Applications requi..
Melt Flow	10 - 15 g/10 min	10 - 15 g/10 min	ASTM D1238
Buckeye Polymers BP FLEX D6520 T BLK Thermoplastic Polyolefin Product Information: TPO's are a family of thermoplastic elastomers which exhibit rubber-like properties and are processable on conventional thermoplastic equipment.Product Features:High tear resist..
Melt Flow	8.0 - 15 g/10 min	8.0 - 15 g/10 min	ASTM D1238
Buckeye Polymers BP RPP 3009 GK3 BLK Polypropylene, Glass Filled Product Information: Our glass reinforced product lines exhibit increased tensile strength, stiffness, and heat deflection. Highly optimized glass reinforced PP resins have successfully replaced en..
Melt Flow	12 - 15 g/10 min @Load 2.16 kg, Temperature 230 °C	12 - 15 g/10 min @Load 4.76 lb, Temperature 446 °F	ISO 1133
AKG Polymers Vision PP PPH BL1302 T20 Polypropylene Compound Vision consists of a complete assortment of high-quality compounds based on industrial PP waste.Applications: Automotive, Non-food packaging, Storage/transport systems, Road and hydraulic Engineerin..
Melt Flow	10 - 15 g/10 min	10 - 15 g/10 min	ASTM D1238
A. Schulman POLYFORT™ PP 1329 Medium Impact Copolymer Polypropylene DescriptionPolyfort® PP 1329 is a medium impact copolymer polypropylene, available in matched automotive colors. Information provided by A. Schulman.
Melt Flow	10 - 15 g/10 min	10 - 15 g/10 min	ASTM D1238
A. Schulman POLYFORT™ PP 1329 Medium Impact Copolymer Polypropylene DescriptionPolyfort® PP 1329 is a medium impact copolymer polypropylene, available in matched automotive colors. Information provided by A. Schulman.
Melt Flow	10 - 15 g/10 min @Load 2.16 kg, Temperature 230 °C	10 - 15 g/10 min @Load 4.76 lb, Temperature 446 °F	ASTM D1238
Ineos H12BLME Polypropylene Homopolymer This is a homopolymer designed for injection molding, and it is compliant with both the FDA status and the EU Food Contact status.Information provided by Ineos Olefins & Polymers USA
Melt Flow	8.0 - 15 g/10 min	8.0 - 15 g/10 min	ASTM D1238
Buckeye Polymers BP RPP 3009 GK BLK Polypropylene, Glass Filled Product Information: Our glass reinforced product lines exhibit increased tensile strength, stiffness, and heat deflection. Highly optimized glass reinforced PP resins have successfully replaced en..
Melt Flow	8.0 - 15 g/10 min	8.0 - 15 g/10 min	ASTM D1238
A. Schulman POLYFORT™ PP 2801 Homopolymer Polypropylene DescriptionPolyfort® PP 2801 is a 12 melt flow homopolymer polypropylene based on the same ingredients as Eastman P4G4Z-001. It is compounded on equipment and under conditions as close as possible..
Melt Flow	6.0 - 15 g/10 min	6.0 - 15 g/10 min	ASTM D1238
Buckeye Polymers BP RPP 2012 T NAT Polypropylene, Calcium Carbonate Filled Product Information: Calcium Carbonate Filled PP Grades have a high impact toughness, moderate increased stiffness, and excel in high gloss applications. Our BP RPP C series product line ranges fro..