- HOME
- POLYMER SEARCH
- Polymer Property : Melt Flow = 2.5 g/10 min
Polymer Property : Melt Flow = 2.5 g/10 min Product List
Physical PropertiesTips: 30 items are displayed at most.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Melt Flow |
2.5
-
5.0
g/10 min <br>@Load 2.16 kg,<br> Temperature 230 °C
|
2.5
-
5.0
g/10 min <br>@Load 4.76 lb,<br> Temperature 446 °F
|
Procedure A; ASTM D1238 |
|
PolyOne Maxxam™ FR PP FR 8-6 A NATURAL - ROHS Polypropylene, Unspecified (PP, Unspecified)
Maxxam™ FR flame-retardant polyolefin compounds and masterbatches meet stringent flammability performance requirements defined by industry agencies, including Underwriters Laboratories UL 94 V-2, V..
|
|||
| Melt Flow |
2.5
g/10 min <br>@Load 2.16 kg,<br> Temperature 190 °C
|
2.5
g/10 min <br>@Load 4.76 lb,<br> Temperature 374 °F
|
ISO 1133 |
|
Polimeri Europa Clearflex® H&T CLH 150 Linear Low Density Polyethylene
Clearflex H&T CLH 150 is a linear low density polyethylene resin, with antioxidants, suitable for cast film extrusion.Stretch films obtained from Clearflex H&T CLH 150 show good optical properties, ..
|
|||
| Melt Flow |
2.5
g/10 min <br>@Load 10.0 kg,<br> Temperature 220 °C
|
2.5
g/10 min <br>@Load 22.0 lb,<br> Temperature 428 °F
|
ISO 1133 |
|
Premix Thermoplastics PRE-ELEC® ABS 1415 Conductive Thermoplastic Compound
PRE-ELEC® ABS 1415 is a conductive thermoplastic compound based on ABS. Conductivity is achieved by using special conductive carbon black. In addition to a low electrical resistivity PRE-ELEC® ABS..
|
|||
| Melt Flow |
2.5
g/10 min <br>@Load 1.20 kg,<br> Temperature 300 °C
|
2.5
g/10 min <br>@Load 2.65 lb,<br> Temperature 572 °F
|
ASTM D 1238 |
|
SABIC Innovative Plastics Lexan® 151R PC
Lexan 151R resin is a high viscosicty, nonhalogenated resin designed to be a candidate for applications produced via extrusion or blow molding processing.This data was supplied by SABIC-IP for the A..
|
|||
| Melt Flow |
2.5
g/10 min <br>@Load 1.20 kg,<br> Temperature 300 °C
|
2.5
g/10 min <br>@Load 2.65 lb,<br> Temperature 572 °F
|
ASTM D1238 |
|
SABIC Innovative Plastics Lexan® FXD153 PC
FXD153 is an Extrusion / Blow molding grade in a Diffusion effect, which is part of the VisualFX family. These effects have been developed to meet increasing Aesthetic demands in the Marketplace. Co..
|
|||
| Melt Flow |
2.5
g/10 min <br>@Load 1.20 kg,<br> Temperature 300 °C
|
2.5
g/10 min <br>@Load 2.65 lb,<br> Temperature 572 °F
|
ASTM D1238 |
|
SABIC Innovative Plastics Lexan® PK2870 PC (Asia Pacific)
LEXAN* PK2870 polycarbonate resin, global grade, MVR (300C/1.2kg) 2 cm3/10min, high viscosity, branched, blow molding, high melt strength, high impact resistance, Available in transparent colors onl..
|
|||
| Melt Flow |
2.5
g/10 min <br>@Load 5.00 kg,<br> Temperature 200 °C
|
2.5
g/10 min <br>@Load 11.0 lb,<br> Temperature 392 °F
|
ASTM D1238 |
|
Resirene Resirene® 6420 Super High Impact Polystyrene
Features:Super High ImpactEasy ProcessingLow ModulusFlexibilityFDA Rating: 21 CFR 177.1640Applications:ExtrusionDeep ThermoformingGPPS/HIPS BlendsPoint of Purchase DisplaysInformation provided by US..
|
|||
| Melt Flow |
2.5
g/10 min <br>@Load 5.00 kg,<br> Temperature 200 °C
|
2.5
g/10 min <br>@Load 11.0 lb,<br> Temperature 392 °F
|
DIN 5375/ISO 1133 |
|
Ineos Nova S-5100 High Impact Compact Polystyrene
(discontinued **)
All mechanical properties measured under standard conditions 50% RH and 23°C.Information provided by NOVA Chemicals.INEOS NOVA began October 1 2007 as an expansion of the 50:50 joint venture betwee..
|
|||
| Melt Flow |
2.5
g/10 min <br>@Load 2.16 kg,<br> Temperature 190 °C
|
2.5
g/10 min <br>@Load 4.76 lb,<br> Temperature 374 °F
|
ASTM D1238 |
|
Eastman E6838-796F Polyethylene
(discontinued **)
E6838-796F is a low density formulation with no slip or antiblock. It is suggested for film applications requiring a good balance of properties, such as converter film for industrial packaging, gen..
|
|||
| Melt Flow | 2.5 g/10 min | 2.5 g/10 min | |
|
Custom Resins Duratel™ MF3 Acetal Copolymer
(discontinued **)
Description: Duratel™ MF3 is a 2.5 melt flow, general purpose acetal copolymer. Information provided by Custom Resins.
|
|||
| Melt Flow |
2.5
g/10 min <br>@Load 2.16 kg,<br> Temperature 230 °C
|
2.5
g/10 min <br>@Load 4.76 lb,<br> Temperature 446 °F
|
ASTM D1238 |
|
BP Amoco Acctuf® 3143 Impact Copolymer Polypropylene
(discontinued **)
Suggested fabrication methods: Sheet extrusion; Thick-wall Injection moldingFeatures: General purposeComplies with FDA specification, Title 21, CFR 177.1520.Typical property data below from injectio..
|
|||
| Melt Flow | 2.5 g/10 min | 2.5 g/10 min | ASTM D1238 |
|
Hyosung Topilene J340F PP
J340F Film Grade Impact CopolymerApplications: Retort CPPCharacteristics:ProcessabilityHigh impactInformation provided by Hyosung Corporation
|
|||
| Melt Flow |
2.5
-
4.5
g/10 min <br>@Load 2.16 kg,<br> Temperature 230 °C
|
2.5
-
4.5
g/10 min <br>@Load 4.76 lb,<br> Temperature 446 °F
|
ASTM D1238-04 |
|
Ineos H03SLME Polypropylene Homopolymer
This is a homopolymer designed for extrusion, and it is compliant with both the FDA status and the EU Food Contact status.Information provided by Ineos Olefins & Polymers USA
|
|||
| Melt Flow |
2.5
g/10 min <br>@Load 2.16 kg,<br> Temperature 230 °C
|
2.5
g/10 min <br>@Load 4.76 lb,<br> Temperature 446 °F
|
ASTM D1238 |
|
Ineos N02G-00 Polypropylene Impact Copolymer
Grade N02G-00 is a low melt flow rate, high-impact copolymer polypropylene for sheet extrusion and thick wall injection molding applications. It offers a superior balance of stiffness and impact str..
|
|||
| Melt Flow |
2.5
g/10 min <br>@Load 5.00 kg,<br> Temperature 200 °C
|
2.5
g/10 min <br>@Load 11.0 lb,<br> Temperature 392 °F
|
|
|
Ineos Styrenics Avantra® 597N Polystyrene (NAFTA)
High-impact grade of polystyrene with improved impact strength and heat resistance, developed for injection molding and extrusion/thermoforming applications.Information provided by BASF.Ineos Styren..
|
|||
| Melt Flow |
2.5
g/10 min <br>@Load 5.00 kg,<br> Temperature 200 °C
|
2.5
g/10 min <br>@Load 11.0 lb,<br> Temperature 392 °F
|
ASTM D1238 |
|
Iran Petrochemical (PCC) GPPS 1160 Polystyrene
GPPS 1160 is a high heat resistance, high molecular weight crystalline polystyrene used in the extrusion industry. It is most suitable for production of oriented polystyrene. It is particularly use..
|
|||
| Melt Flow |
2.5
g/10 min <br>@Load 2.16 kg,<br> Temperature 230 °C
|
2.5
g/10 min <br>@Load 4.76 lb,<br> Temperature 446 °F
|
ASTM D1238 |
|
LyondellBasell Hifaxâ„¢ CA199AC Thermoplastic Olefin Resin
Key Features: low melt flow, medium low modulus, paintable thermoplastic olefin resin, excellent balance of properties, high toughness, good paintability, flexibleApplications: automotive air bag do..
|
|||
| Melt Flow |
2.5
-
3.5
g/10 min <br>@Load 5.00 kg,<br> Temperature 200 °C
|
2.5
-
3.5
g/10 min <br>@Load 11.0 lb,<br> Temperature 392 °F
|
Granulate; ISO 1133/H |
|
SYNTHOS Krasten® 152 General Purpose Polystyrene
Improved heat resistance, very good rheological properties.Examples of Application:Injection moulding – vegetable boxes for refrigerators, shower enclosure panels, CD and DVD cases. Blends with..
|
|||
| Melt Flow |
2.5
-
5.0
g/10 min <br>@Load 5.00 kg,<br> Temperature 372 °C
|
2.5
-
5.0
g/10 min <br>@Load 11.0 lb,<br> Temperature 702 °F
|
ASTM D1238 |
|
Solvay Specialty Polymers Hyflon® PFA 120 Perfluoroalkoxy (PFA)
Hyflon® PFA is a unique family of semi-crystalline, melt processable perfluoropolymers which combine excellent mechanical characteristics to unique properties such as chemical inertness, heat res..
|
|||
| Melt Flow |
2.5
-
4.0
g/10 min <br>@Load 10.0 kg,<br> Temperature 230 °C
|
2.5
-
4.0
g/10 min <br>@Load 22.0 lb,<br> Temperature 446 °F
|
ASTM D1238 |
|
Solvay Specialty Polymers Solef® 60512 Polyvinylidene Fluoride (PVDF)
Solef® 60512 PVDF copolymer has high viscosity of the melt and it is a grade for offshore piping.Features: Copolymer; High ViscosityUses: PipingAdditional Properties: Crystallization Heat - ASTM ..
|
|||
| Melt Flow |
2.5
g/10 min <br>@Load 5.00 kg,<br> Temperature 200 °C
|
2.5
g/10 min <br>@Load 11.0 lb,<br> Temperature 392 °F
|
ISO 1133 |
|
Styrolution PS 641F HIPS
Styrolution PS 641F is high impact polystyrene with high heat resistance.High impactHigh heat resistanceInformation provided by Styrolution
|
|||
| Melt Flow | 2.5 g/10 min | 2.5 g/10 min | ASTM D1238 |
|
UBE UMERIT 2525F Metallocene LLDPE
Description: UBE Super Polyethylene Umerit® is an ethylene-olefin copolymer made by UBE using the metallocene catalytic method. The metallocene catalytic method results in superior physical propert..
|
|||
| Melt Flow |
2.5
g/10 min <br>@Load 2.16 kg,<br> Temperature 190 °C
|
2.5
g/10 min <br>@Load 4.76 lb,<br> Temperature 374 °F
|
ASTM D1238 |
|
DuPont Bynel® 4125 Anhydride-Modified LLDPE Adhesive Resin
Bynel® Series 4100 resins are anhydride-modified, linear low-density polyethylene (LLDPE) resins. All 4100 Series resins are available in pellet form for use in conventional extrusion and coextrusi..
|
|||
| Melt Flow |
2.5
g/10 min <br>@Load 2.16 kg,<br> Temperature 190 °C
|
2.5
g/10 min <br>@Load 4.76 lb,<br> Temperature 374 °F
|
ASTM D1238 |
|
DuPont Bynel® 4206 Anhydride-Modified LDPE Adhesive Resin
Bynel® Series 4200 resins are anhydride-modified, low-density polyethylene resins. They are available in pellet form for use in conventional extrusion and coextrusion equipment designed to process ..
|
|||
| Melt Flow |
2.5
g/10 min <br>@Load 2.16 kg,<br> Temperature 235 °C
|
2.5
g/10 min <br>@Load 4.76 lb,<br> Temperature 455 °F
|
|
|
Arkema Group Rilsan® AESN TL Nylon 12, Flexible Tubing Grade (Dry)
Designation ISO 1874-PA12,EHL,22-010Rigid grade for tubes extrusion. Available colors: black and natural. Light and heat stabilized.High impact strength. Good chemical resistance. Very good ability ..
|
|||
| Melt Flow | 2.5 g/10 min | 2.5 g/10 min | |
|
Bapolan® ABS8430 ABS Polymer, Extrusion/Injection Grade
Applications: Electronic Instruments, appliances.Bapolene® and Bapolan® are registered trademarks of Bamberger Polymers, Inc. Information provided by Bamberger Polymers
|
|||
| Melt Flow |
2.5
g/10 min <br>@Load 5.00 kg,<br> Temperature 200 °C
|
2.5
g/10 min <br>@Load 11.0 lb,<br> Temperature 392 °F
|
|
|
BASF Polystyrol® 165 H Polystyrene (Europe)
High molecular grades, often blended with high-impact extrusion grades (e.g. for dairy products).Data was collected by ISO methods and provided by BASF.
|
|||
| Melt Flow |
2.5
g/10 min <br>@Load 2.16 kg,<br> Temperature 190 °C
|
2.5
g/10 min <br>@Load 4.76 lb,<br> Temperature 374 °F
|
ISO 1133 |
|
Polimeri Europa Clearflex® H&T CLH 196 Hexene Copolymer Linear Low Density Polyethylene
Clearflex H&T CLH 196 is a hexene copolymer linear low density polyethylene (C6-LLDPE), with antioxidants, suitable for cast film extrusion.Stretch films manufactured with Clearflex H&T CLH 196 have..
|
|||
| Melt Flow | 2.5 g/10 min | 2.5 g/10 min | ASTM D1238 |
|
Mitsubishi Iupital® F10-02 High Viscosity Acetal Copolymer
Information provided by Polymer Technology and Services, LLC (PTS).
|
|||
| Melt Flow |
2.5
g/10 min <br>@Load 2.16 kg,<br> Temperature 190 °C
|
2.5
g/10 min <br>@Load 4.76 lb,<br> Temperature 374 °F
|
ASTM D1238 |
|
Eastman E6838-963F Polyethylene
(discontinued **)
E6838-963F is a low density formulation with medium slip and medium antiblock. It is suggested for film applications that require a good balance of physical and optical properties.List of Applicati..
|
|||
Copyright © lookpolymers.com All Rights Reserved