Songhan Plastic Technology Co.,Ltd.
 POLYMER SEARCH

Polymer Property : Melt Flow = 25 g/10 min Product List

Physical Properties

Tips: 30 items are displayed at most.
Physical Properties Metric English Comments
Melt Flow 25 g/10 min

@Load 2.16 kg,
Temperature 230 °C
 25 g/10 min

@Load 4.76 lb,
Temperature 446 °F
 STN EN ISO 1133
Plastcom PLASTAMID® 6 BT N 26 B PA6
Basic type PA 6 for compounding, for general use. Use: automotive, engineering, electrical and consumer-goods industry. Delivered in the natural mode and in the full RAL color scale.Information Prov..
Melt Flow 25 g/10 min

@Load 2.16 kg,
Temperature 230 °C
 25 g/10 min

@Load 4.76 lb,
Temperature 446 °F
 ASTM D1238
RheTech Products FRp256-01 Polypropylene Copolymer, Flame Retardant, Black
Applications: Electrical component housingsConsumer goodsInjection molding conditions reported in table.Information provided by RheTech Products.
Melt Flow 25 g/10 min

@Load 1.20 kg,
Temperature 300 °C
 25 g/10 min

@Load 2.65 lb,
Temperature 572 °F
 ASTM D1238
SABIC Innovative Plastics Lexan® FXD171R PC (Asia Pacific)
Transparent/transluscent PC for light diffusion special effects. MFR of 25.0.
Melt Flow 25 g/10 min

@Load 1.20 kg,
Temperature 300 °C
 25 g/10 min

@Load 2.65 lb,
Temperature 572 °F
 ASTM D1238
SABIC Innovative Plastics Lexan® HP1R PC (Asia Pacific)
High flow polycarbonate. For medical devices and pharmaceutical applications. Healthcare management of change, biocompatible (ISO10993 or USP Class VI). EtO sterilizable. Contains a higher amount..
Melt Flow 25 g/10 min

@Load 2.16 kg,
Temperature 330 °C
 25 g/10 min

@Load 4.76 lb,
Temperature 626 °F
 ASTM D1238
SABIC Innovative Plastics Lexan® XHT4143T PC Copolymer (Asia Pacific)
XHT4143 is a high flow, UV stabilized, high heat polycarbonate copolymer blend with an HDT/Af of 162C.
Melt Flow 25 g/10 min
25 g/10 min
ASTM D1238
Gichem GILAC F120 Acrylonitrile Butadiene Styrene  (discontinued **)
ABS high fluidity, good stiffness and excellent stampability. Medium-High Injection speed.Information provided by GICHEM Gruppo Industriale Chimico
Melt Flow 25 g/10 min
25 g/10 min
5% POSS® in PP
Hybrid Plastics MS0825 Nanoreinforced® POSS® Polypropylene
Nanoreinforced® polypropylene utilizes POSS® technology to achieve, increased hydrophobicity, lower coefficient of friction and improved processability through structural control at the nanome..
Melt Flow 25 g/10 min
25 g/10 min
ASTM D1238
Hyosung Topilene J742 PP
J742 Injection Impact CopolymerApplications: Large articles:Washing M/C partsElectric applianceIndustrial applianceCharacteristics:Medium impactHigh stiffnessInformation provided by Hyosung Corporat..
Melt Flow 25 g/10 min

@Load 2.16 kg,
Temperature 230 °C
 25 g/10 min

@Load 4.76 lb,
Temperature 446 °F
 ASTM D1238
LG Chemical KEYFLEX BT 1030D Ester Type TPE
Description: Injection Molding, TPC-ET, General Purpose, Low ModulusApplication: Automotive Interior, Soft Touch GripsCAS: 37282-12-5Information provided by LG Chemical
Melt Flow 25 g/10 min

@Load 2.16 kg,
Temperature 200 °C
 25 g/10 min

@Load 4.76 lb,
Temperature 392 °F
 ASTM D1238
LG Chemical KEYFLEX BT 1045D Ester Type TPE
Description: Injection Molding, TPC-ET, General Purpose, Medium ModulusApplication: Antenna Cover, Injection Parts for Leisure & SportsCAS: 37282-12-5Information provided by LG Chemical
Melt Flow 25 g/10 min

@Load 2.16 kg,
Temperature 230 °C
 25 g/10 min

@Load 4.76 lb,
Temperature 446 °F
 ASTM D1238
LG Chemical KEYFLEX BT 1055D Ester Type TPE
Description: Injection Molding, TPC-ET, General Purpose, Medium ModulusApplication: Antenna Cover, Injection Parts for Leisure & SportsCAS: 37282-12-5Information provided by LG Chemical
Melt Flow 25 g/10 min

@Load 2.16 kg,
Temperature 235 °C
 25 g/10 min

@Load 4.76 lb,
Temperature 455 °F
 Estimated using room temperature density; ISO 1133
Lanxess Durethan® B 31 F 000000 Nylon 6, Film Grade
PA 6, film grade, low viscosity, easy flow, additive-freeApplication Examples: flat and blown film, monofilaments, coatings
Melt Flow 25 g/10 min
25 g/10 min
ASTM D1238
Hyosung Topilene J800 PP
J800 Injection General HomopolymerApplications: General injectionCharacteristics:FlowabilityStiffnessInformation provided by Hyosung Corporation
Melt Flow 25 g/10 min

@Load 2.16 kg,
Temperature 260 °C
 25 g/10 min

@Load 4.76 lb,
Temperature 500 °F
 ASTM D1238
LG Chemical LUPOY ER5001RFA PC/ABS, Halogen Free, Flame Retardant
Description: Injection Molding, PC/ABS, Halogen Free Flame Retardant, EPEATApplication: IT&OA (Notebook PC housing)CAS: 103598-77-2, 9003-56-9 and 181028-79-5Information provided by LG Chemical
Melt Flow 25 g/10 min

@Load 1.20 kg,
Temperature 300 °C
 25 g/10 min

@Load 2.65 lb,
Temperature 572 °F
 ASTM D 1238
MRC Polymers NAXELLâ„¢ PC210HR General Purpose Polycarbonate, High MFR
• Black onlyInformation provided by MRC Polymers Inc.
Melt Flow 25 g/10 min

@Load 2.16 kg,
Temperature 230 °C
 25 g/10 min

@Load 4.76 lb,
Temperature 446 °F
 Condition L; ASTM D1238
LyondellBasell Hifaxâ„¢ CB285 Thermoplastic Polyolefin Elastomer
Description: Hifaxâ„¢ CB285 high melt flow, 1,300 MPa flexural modulus, low CLTE, UV-stabilized, paintable, mineral-filled thermoplastic elastomeric olefin (TEO) resin has a very good balance of ..
Melt Flow 25 g/10 min
25 g/10 min
ASTM D1238
Solvay Specialty Polymers solvene® T 2808 Electroactive Polymer (EAP)
Annealing Temperature - < 135 °C; Breakdown Voltage - 250 kV/mm; Coercive Field - 50 kV/mm; Crystallization Point - ASTM D3418 123 °C; Curie Temperature - ASTM D3418 110 °C; d33 - -38.0 pC/..
Melt Flow 25 g/10 min

@Load 2.16 kg,
Temperature 380 °C
 25 g/10 min

@Load 4.76 lb,
Temperature 716 °F
 ASTM D1238
Solvay Specialty Polymers Veradel® 3250 Polyethersulfone (PESU)
Veradel® 3250 polyethersulfone (PESU) has a slightly higher melt flow rate than Veradel® 3200. This transparent resin offers a high heat deflection temperature, excellent toughness and dimensi..
Melt Flow 25 g/10 min

@Load 10.0 kg,
Temperature 250 °C
 25 g/10 min

@Load 22.0 lb,
Temperature 482 °F
 ASTM D1238
Samsung Cheil Industries Infino® LS-3302A PC, Glass Filled High Impact
Information provided by Samsung Cheil Industries.
Melt Flow 25 g/10 min

@Load 10.0 kg,
Temperature 220 °C
 25 g/10 min

@Load 22.0 lb,
Temperature 428 °F
 ASTM D1238
Samsung Cheil Industries Starex® VG-4920 ABS, Glass Filled FR
Information provided by Samsung Cheil Industries.
Melt Flow 25 g/10 min

@Load 10.0 kg,
Temperature 280 °C
 25 g/10 min

@Load 22.0 lb,
Temperature 536 °F
 ASTM D1238
Samsung Cheil Industries Infino® EM-8240C MPPE, Glass Filled
MPPE/GF material that is used in the main frame of banknote sortersInformation provided by Samsung Cheil Industries.
Melt Flow 25 g/10 min

@Load 10.00 kg
 25 g/10 min

@Load 22.05 lb
 ASTM D1238
Sumitomo Chemical ESPOLEX® WT485 Thermoplastic Elastomer
ESPOLEX® TPE Series is a group of thermoplastic elastomers produced by Sumitomo Chemical Company. Among its material advantages, ESPOLEX® TPE Series is distinguished by offering many low-densi..
Melt Flow 25 g/10 min

@Load 2.16 kg,
Temperature 230 °C
 25 g/10 min

@Load 4.76 lb,
Temperature 446 °F
 ISO 1133
Borealis Borpact™ SG910MO Polypropylene for Injection Molding
Borpact™ SG910MO is a high impact and transparent polypropylene. This grade provides high gloss, high transparency and excellent impact properties. Applications: containers and products with medium..
Melt Flow 25 g/10 min
25 g/10 min
ASTM D1238
A. Schulman POLYFORT™ FPP 3716 Talc Filled Copolymer Polypropylene
DescriptionPolyfort® FPP 3716 is a 12% talc filled copolymer polypropylene product. Information provided by A. Schulman.
Melt Flow 25 g/10 min
25 g/10 min
ASTM D1238
Total PPC 4720 WZ Polypropylene, Impact Copolymer
ATOFINA 4720 is an impact copolymer. 4720 is characterized by a high fluidity offering a combination of east of processing and good mechanical properties.ApplicationATOFINA 4720 has been formulated..
Melt Flow 25 g/10 min
25 g/10 min
ASTM D1238
A. Schulman POLYFORT™ FPP 3716 Talc Filled Copolymer Polypropylene
DescriptionPolyfort® FPP 3716 is a 12% talc filled copolymer polypropylene product. Information provided by A. Schulman.
Melt Flow 25 g/10 min

@Load 10.0 kg,
Temperature 220 °C
 25 g/10 min

@Load 22.0 lb,
Temperature 428 °F
 ASTM D 1238
Cossa Polimeri ESTADIENE 1030 V0 Flame Retardant ABS
Acrylonitrile Butadiene StyreneFlame retardant class V0, PBDE free, good impact resistance, high gloss, good light resistance, excellent processabilityInformation provided by Cossa Polimeri S.r.l.
Melt Flow 25 g/10 min

@Load 2.16 kg,
Temperature 265 °C
 25 g/10 min

@Load 4.76 lb,
Temperature 509 °F
 ASTM D1238
Diamond Polymers DIAMALOY FR530 PC/PBT Alloy, 30% Glass Filled Flame Retardant
Information Provided by Diamond Polymers, Inc. & Network Polymers, Inc.
Melt Flow 25 g/10 min

@Load 5.00 kg,
Temperature 275 °C
 25 g/10 min

@Load 11.0 lb,
Temperature 527 °F
 ISO 1133
BASF Ultramid® B3GM35 Q611 15/25% Glass/Mineral Filled PA6 (Conditioned)
Ultramid B3GM35 Q611 is a 40% combined glass-fiber and mineral reinforced injection molding PA6 grade.
Melt Flow 25 g/10 min

@Load 1.20 kg,
Temperature 300 °C
 25 g/10 min

@Load 2.65 lb,
Temperature 572 °F
 ASTM D1238
SABIC Innovative Plastics Lexan® HFD1711 PC Copolymer (Asia Pacific)
25 MFR LEXAN High Flow Ductile Copolymer
Copyright © lookpolymers.com All Rights Reserved