- HOME
- POLYMER SEARCH
- Polymer Property : Melt Flow = 34 g/10 min
Polymer Property : Melt Flow = 34 g/10 min Product List
Physical PropertiesTips: 30 items are displayed at most.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Melt Flow |
34
g/10 min <br>@Load 2.16 kg,<br> Temperature 230 °C
|
34
g/10 min <br>@Load 4.76 lb,<br> Temperature 446 °F
|
Procedure A Condition L; ASTM D1238 |
|
Network Polymers NPP 20-3401 C/AS
Description: Random Copolymer Polypropylene, Clarified, with AntistatInformation provided by Network Polymers Inc.
|
|||
| Melt Flow |
34
g/10 min <br>@Load 2.16 kg,<br> Temperature 230 °C
|
34
g/10 min <br>@Load 4.76 lb,<br> Temperature 446 °F
|
Procedure A Condition L; ASTM D1238 |
|
Network Polymers NPP 20-3401 NC
Description: Random Copolymer Polypropylene, Non ClarifiedInformation provided by Network Polymers Inc.
|
|||
| Melt Flow |
34
g/10 min <br>@Load 2.16 kg,<br> Temperature 260 °C
|
34
g/10 min <br>@Load 4.76 lb,<br> Temperature 500 °F
|
ASTM D1238 |
|
SABIC Innovative Plastics Cycoloy® CY5000 PC+ABS
Flame retardant PC/ABS blend using non-brominated and non-chlorinated flame retardant systems, offering hydrolytic stability and excellent flow for a wide variety of thin wall or large size applicat..
|
|||
| Melt Flow |
34
g/10 min <br>@Load 2.16 kg,<br> Temperature 260 °C
|
34
g/10 min <br>@Load 4.76 lb,<br> Temperature 500 °F
|
ASTM D1238 |
|
SABIC Innovative Plastics Cycoloy® CY5000 PC+ABS (Asia Pacific)
Flame retardant PC/ABS blend using non-brominated and non-chlorinated flame retardant systems, offering hydrolytic stability and excellent flow for a wide variety of thin wall or large size applicat..
|
|||
| Melt Flow |
34
g/10 min <br>@Load 2.16 kg,<br> Temperature 260 °C
|
34
g/10 min <br>@Load 4.76 lb,<br> Temperature 500 °F
|
ASTM D1238 |
|
SABIC Innovative Plastics Cycoloy® RCY6013 PC+ABS (Asia Pacific)
Cycoloy* RCY6013 resin is an injection moldable high flow PC/ABS blend with non-brominated and non-chlorinated flame retardant. It contains 30% post consumer recycle content with a UL-94 V0 @ 1.5 mm..
|
|||
| Melt Flow |
34
g/10 min <br>@Load 2.16 kg,<br> Temperature 230 °C
|
34
g/10 min <br>@Load 4.76 lb,<br> Temperature 446 °F
|
ISO 1133 |
|
Radici Heraflex® E 4718 TPC-ET Thermoplastic Elastomer
TPC-ET Thermoplastic Elastomer. Low Modulus, Nominal Shore D/15s 43. Natural colorProcessing technology: Injection moldingInformation provided by Radici group.
|
|||
| Melt Flow |
34
g/10 min <br>@Load 2.16 kg,<br> Temperature 230 °C
|
34
g/10 min <br>@Load 4.76 lb,<br> Temperature 446 °F
|
Condition L; ASTM D1238 |
|
PolyMirae Moplen HP562S Fiber (Spunbond) Grade Polypropylene
Moplen HP562S is the controlled rheology polypropylene homopolymer manufactured by PMC under the license of BASELL using the Spheripol process. Moplen HP562S is a homopolymer particularly suitable f..
|
|||
| Melt Flow | 34 g/10 min | 34 g/10 min | ISO 1133 |
|
Solvay Engineered Polymers SEQUEL® 1490 Engineered Polyolefin
(discontinued **)
Description: SEQUEL® 1490 engineered polyolefin material is designed for automotive exterior applications that require a combination of stiffness, low-temperature impact resistance, and excellent p..
|
|||
| Melt Flow |
34
g/10 min <br>@Load 2.16 kg,<br> Temperature 230 °C
|
34
g/10 min <br>@Load 4.76 lb,<br> Temperature 446 °F
|
ISO 1133 |
|
Radici Heraflex® E 3918 TPC-ET Thermoplastic Elastomer
TPC-ET Thermoplastic Elastomer. Lowest Modulus, Nominal Shore D/15s 35. Natural colorProcessing technology: Injection moldingInformation provided by Radici group.
|
|||
| Melt Flow |
34
g/10 min <br>@Load 3.80 kg,<br> Temperature 260 °C
|
34
g/10 min <br>@Load 8.38 lb,<br> Temperature 500 °F
|
ASTM D1238 |
|
Ravago Manufacturing Americas Hybrid B2035I Polycarbonate + PBT Alloy
Available in North America High Impact Resistance Form: PelletsInformation provided by Ravago
|
|||
| Melt Flow |
34
g/10 min <br>@Load 2.16 kg,<br> Temperature 230 °C
|
34
g/10 min <br>@Load 4.76 lb,<br> Temperature 446 °F
|
ASTM D1238 |
|
LG Chemical SEETEC H7700 Polypropylene, Homopolymer
Features: Seetec H7700 is designed for the extrusion of fine fibers with the spunbond technology. This grade is characterized by very narrow molecular weight distribution (MWD), with anti-gas fading..
|
|||
| Melt Flow |
34
g/10 min <br>@Load 2.16 kg,<br> Temperature 260 °C
|
34
g/10 min <br>@Load 4.76 lb,<br> Temperature 500 °F
|
Estimated using room temperature density; ISO 1133 |
|
Lanxess Pocan® B 3215 Z 000000 PBT, 10% Glass Fiber
PBT, 10% glass fibers, injection molding, impact modified
|
|||
| Melt Flow |
34
g/10 min <br>@Load 2.16 kg,<br> Temperature 260 °C
|
34
g/10 min <br>@Load 4.76 lb,<br> Temperature 500 °F
|
ISO 1133-1 |
|
Lanxess Pocan® B 5220 XF 000000 PBT, 20% Glass Spheres
PBT, 20% glass spheres, injection molding, improved flowability, improved impact strength, low tendency to warpInformation provided by LANXESS.
|
|||
| Melt Flow |
34
g/10 min <br>@Load 5.00 kg,<br> Temperature 270 °C
|
34
g/10 min <br>@Load 11.0 lb,<br> Temperature 518 °F
|
Estimated using room temperature density; ISO 1133 |
|
Lanxess Pocan® T 3150 XF 000000 PBT + PET, 55% Glass Fiber
PBT+PET, 55% glass fibers, injection molding, improved flowability, low tendency to warp, increased temperature peak load, increased strength and increased modulus
|
|||
| Melt Flow |
34
g/10 min <br>@Load 2.16 kg,<br> Temperature 230 °C
|
34
g/10 min <br>@Load 4.76 lb,<br> Temperature 446 °F
|
Condition L; ASTM D1238 |
|
LyondellBasell Pro-faxâ„¢ PH835 Polypropylene Homopolymer
Description: Pro-faxâ„¢ PH835 is a very high melt flow, controlled rheology polypropylene homopolymer resin designed for spunbond and continuous filament applications that require superior spinna..
|
|||
| Melt Flow | 34 g/10 min | 34 g/10 min | ASTM D1238 |
|
LyondellBasell Alathon® H5234 High Density Polyethylene
ApplicationsALATHON H 5234 is a high flow injection molding grade of resin designed for fast cycle and thin wall molding. It provides cold temperature impact resistance. Typical applications inclu..
|
|||
| Melt Flow |
34
g/10 min <br>@Load 2.16 kg,<br> Temperature 230 °C
|
34
g/10 min <br>@Load 4.76 lb,<br> Temperature 446 °F
|
ASTM D1238 |
|
Ineos L34N-00 Polypropylene Impact Copolymer
Grade L34N-00 typically has a 35 melt flow rate and is a low gloss, high impact polypropylene copolymer. This material meets the requirements of the U.S. Food and Drug Administration as specified in..
|
|||
| Melt Flow |
34
-
40
g/10 min <br>@Load 5.00 kg,<br> Temperature 365 °C
|
34
-
40
g/10 min <br>@Load 11.0 lb,<br> Temperature 689 °F
|
ASTM D1238 |
|
Solvay Specialty Polymers Radel® R-5600 Polyphenylsulfone (PPSU)
Radel® R-5600 is a very high melt flow grade of Radel® polyphenylsulfone (PPSU). It is especially well-suited for parts requiring long flow length with thin walls. Radel® resins offer excep..
|
|||
| Melt Flow |
34
g/10 min <br>@Load 1.20 kg,<br> Temperature 300 °C
|
34
g/10 min <br>@Load 2.65 lb,<br> Temperature 572 °F
|
ASTM D1238 |
|
Samyang Trirex® 3017PJ Polycarbonate
PC is characterized by its excellent impact resistance, dimensional stability and excellent thermal resistance.3017PJ is a super high flow grade.Information provided by Samyang.
|
|||
| Melt Flow |
34
g/10 min <br>@Load 2.16 kg,<br> Temperature 230 °C
|
34
g/10 min <br>@Load 4.76 lb,<br> Temperature 446 °F
|
ASTM D1238 |
|
SABIC Innovative Plastics LNP THERMOCOMP M7002XXH PP
LNP* THERMOCOMP* M7002XXH is a compound based on Polypropylene resin containing proprietary antimicrobial additives. Designed for touch surfaces in healthcare applications. Added features include:..
|
|||
| Melt Flow |
34
g/10 min <br>@Load 1.20 kg,<br> Temperature 300 °C
|
34
g/10 min <br>@Load 2.65 lb,<br> Temperature 572 °F
|
ASTM D1238 |
|
Samyang Trirex® 3017IR Polycarbonate with Heat Stabilizer
PC is characterized by its excellent impact resistance, dimensional stability and excellent thermal resistance.3017IR is a super high flow grade with added heat stabilizers, separating materials and..
|
|||
| Melt Flow |
34
g/10 min <br>@Load 2.16 kg,<br> Temperature 230 °C
|
34
g/10 min <br>@Load 4.76 lb,<br> Temperature 446 °F
|
ASTM D1238 |
|
A. Schulman PP 1930-01 Polypropylene Copolymer Polypropylene
DescriptionPolypropylene PP 1930-01 is an automotive recognized copolymer polypropylene for use on interior trim applications.Information provided by A. Schulman.
|
|||
| Melt Flow |
34
g/10 min <br>@Load 10.0 kg,<br> Temperature 220 °C
|
34
g/10 min <br>@Load 22.0 lb,<br> Temperature 428 °F
|
ISO 1133 |
|
Ter Hell Plastic Terez® ABS 3320 A UV Acrylonitrile Butadiene Styrene
Rapid flowing ABS with high impact strength, antistatic agent and UV stabilizer.Application: For all kinds of injection molding thin-walled parts.Information provided by Ter Hell Plastic GMBH.
|
|||
| Melt Flow |
34
g/10 min <br>@Load 2.16 kg,<br> Temperature 230 °C
|
34
g/10 min <br>@Load 4.76 lb,<br> Temperature 446 °F
|
ASTM D1238 |
|
A. Schulman PP 1930-01 Polypropylene Copolymer Polypropylene
DescriptionPolypropylene PP 1930-01 is an automotive recognized copolymer polypropylene for use on interior trim applications.Information provided by A. Schulman.
|
|||
| Melt Flow |
34
g/10 min <br>@Load 2.16 kg,<br> Temperature 230 °C
|
34
g/10 min <br>@Load 4.76 lb,<br> Temperature 446 °F
|
ASTM D1238 |
|
A. Schulman PP 1930-01 Polypropylene Copolymer Polypropylene
DescriptionPolypropylene PP 1930-01 is an automotive recognized copolymer polypropylene for use on interior trim applications.Information provided by A. Schulman.
|
|||
| Melt Flow |
34
g/10 min <br>@Load 2.16 kg,<br> Temperature 230 °C
|
34
g/10 min <br>@Load 4.76 lb,<br> Temperature 446 °F
|
ASTM D1238 |
|
A. Schulman PP 1930-01 Polypropylene Copolymer Polypropylene
DescriptionPolypropylene PP 1930-01 is an automotive recognized copolymer polypropylene for use on interior trim applications.Information provided by A. Schulman.
|
|||
| Melt Flow |
34
g/10 min <br>@Load 2.16 kg,<br> Temperature 230 °C
|
34
g/10 min <br>@Load 4.76 lb,<br> Temperature 446 °F
|
ASTM D1238 |
|
A. Schulman PP 1930-01 Polypropylene Copolymer Polypropylene
DescriptionPolypropylene PP 1930-01 is an automotive recognized copolymer polypropylene for use on interior trim applications.Information provided by A. Schulman.
|
|||
| Melt Flow |
34
g/10 min <br>@Load 2.16 kg,<br> Temperature 230 °C
|
34
g/10 min <br>@Load 4.76 lb,<br> Temperature 446 °F
|
ASTM D1238 |
|
Braskem CP360H Homopolymer Polypropylene
Description: Narrow MWD, Low Smoke / CondensateApplications: Suggested Uses Include Fine Denier Spunbond Nonwovens, High-Speed Spinning - Continuous Filament YarnThis resin meets the requirements fo..
|
|||
| Melt Flow |
34
g/10 min <br>@Load 2.16 kg,<br> Temperature 230 °C
|
34
g/10 min <br>@Load 4.76 lb,<br> Temperature 446 °F
|
ASTM D1238 |
|
LG Chemical SEETEC R7700 Polypropylene, Random Copolymer
Features: Seetec R7700 is designed for the extrusion of fibers with the spunbond technology. This grade is characterized by narrow MWD and good processability. SEETEC R7700 meets the FDA requirement..
|
|||
| Melt Flow | 34 g/10 min | 34 g/10 min | Melt Flow Ratio (I10/I2) is 7.3; ASTM D1238 |
|
Huntsman Rexell® H2104 Injection Molding LLDPE
(discontinued **)
Linear-low high density homopolymer, injection molding, FDA compliant.Features: High flow and short cycle times.Applications: Thin wall containers.FDA Notes: Conforms to FDA regulation 21 CFR 177.15..
|
|||
Copyright © lookpolymers.com All Rights Reserved