Polymer Property : Thickness = 508 microns Product List

Physical Properties

Tips: 30 items are displayed at most.

Physical Properties	Metric	English	Comments
Thickness	508 - 1500 microns	20.0 - 59.0 mil	Range of Thicknesses Available
Rogers Corporation Poron® 4790-92-12 P Series Urethane Foam, Extra Soft, Slow Rebound, PET Film Reinforced Extra soft, slow rebound with a very low closure force. Standard available thickness range from 0.021" to 0.500" (0.53 mm to 12.7 mm).Features and Benefits of PORON Products: Excellent compression ..
Thickness	508 microns	20.0 mil	overall; Arlon SQA-TMS-003
Arlon A3020-B004-12 Silicone Rubber/Fiberglass Laminate  (discontinued **) Side 1: cured fusible silicone rubber; Substrate: 25% sinusoidal fiberglass; Side 2: cured fusible silicone rubber; Interleave: 1 mil PE film
Thickness	508 microns	20.0 mil	Overall; Arlon SQA-TMS-003
Arlon 31580R020 0.020" (0.508 mm) Uncured Silicone Rubber on HDPE Carrier  (discontinued **) Design/Construction: Interleave: PolyethyleneSide 1: Uncured Silicone RubberCarrier: High Density PolyethyleneAppearance: Red silicone gum on polymer linerThis data represents typical values for the..
Thickness	508 microns	20.0 mil	Side 1; Arlon SQA-TMS-003
Arlon 31580R020 0.020" (0.508 mm) Uncured Silicone Rubber on HDPE Carrier  (discontinued **) Design/Construction: Interleave: PolyethyleneSide 1: Uncured Silicone RubberCarrier: High Density PolyethyleneAppearance: Red silicone gum on polymer linerThis data represents typical values for the..
Thickness	508 microns	20.0 mil	Side 1; Arlon SQA-TMS-003
Arlon 4570XB025 0.025" (0.635 mm) Uncured Silicone Rubber with Fiberglass Substrate  (discontinued **)&lt Design/Construction: Interleave: PolyethyleneSide 1: Uncured Silicone Rubber Substrate: Style 1165 Fiberglass This data represents typical values for the production material. The data should not be ..
Thickness	508 microns	20.0 mil	Nominal
DuPont™ Nomex® E56 Paper, 20 mil Nominal Thickness Nomex® Type E56 is designed for cost critical uses which require lesser amounts of mechanical and electrical strength than other Nomex® grades. It is thermally similar to Nomex® Type 410 but as..
Thickness	508 microns	20.0 mil	Tape
3M 411DL Flexomount™ Solid Printing Tapes 3M™ Flexomount™ Solid Printing Tapes are double coated tapes designed for mounting photopolymer and rubber printing plates to flexographic printing cylinders or sleeve systems. The adhesive system..
Thickness	508 microns	20.0 mil	Overall; Arlon SQA-TMS-003
Arlon 10502R020 0.020" (0.508 mm) Cured Silicone Rubber (Unsupported) Design/Construction:Material: Cured Silicone RubberLiner: Polyethylene Recommended Cure Cycle: Product delivered curedRecommended Post Cure Cycle: Product delivered post-curedAppearance: Red silicon..
Thickness	508 - 610 microns	20.0 - 24.0 mil	Side 1
Arlon 30090R022 0.022" (0.559 mm) Uncured Unsupported Silicone Rubber on Kodacel Carrier Design/Construction:Side 1: Uncured Unsupported Silicone Rubber on Kodacel Carrier Appearance: Red silicone gum on polymer linerThis data represents typical values for the production material. The d..
Thickness	508 microns	20.0 mil	Overall Thickness; Arlon SQA-TMS-003
Arlon 51044R020 0.020" Semi-Cured Silicone Rubber with Fiberglass Substrate Design/Construction:Interleave: 2.5 mil PolyethyleneSide 1: Semi-cured Silicone RubberSubstrate: Style 7628 FiberglassThis data represents typical values for the production material and should no..
Thickness	508 microns	20.0 mil	Overall Thickness
Arlon 51422R020 0.020" Cured Silicone Rubber with Fiberglass Substrate Design/Construction:Side 1: Cured Silicone RubberSubstrate: Prime Coated 7628 FiberglassInterleave: 3 mil PolyethyleneThis data represents typical values for the production material and should no..
Thickness	508 microns	20.0 mil	Substrate; Arlon SQA-TMS-003
Arlon 61089R040 0.040" (1.02 mm) Uncured/Cured Silicone Rubber with Denier Vectran HS Substrate Design/Construction: Interleave: Polyethylene Layer 2: Uncured Silicone Rubber Layer 1: Cured Silicone Rubber Substrate: 1000 Denier HS Appearance: Red silicone gum on fabricThis data represents t..
Thickness	508 microns	20.0 mil	Overall; Arlon SQA-TMS-012
Arlon 920-05C##FR-P1 0.020" (0.508 mm) Cured Self-fusing Silicone Tape Design/Construction: Interleave: Polyethylene Rubber: Cured Self-fusing Silicone Rubber Cross Section Type: 0.5” Wide Rectangular .0.5 inch wide, 20 mil thick, Black, Rectangular cross-section, Se..
Thickness	508 microns	20.0 mil	Rubber; Arlon SQA-TMS-012
Arlon 920-10CxxFR-P1 0.020" Self-Fusing Silicone Rubber Tape 1 inch wide, 20 mil thick, brown, rectangular cross-section, self-fusing silicone tape. Product is supplied in various yard long roll lengths as indicated by the xx characters in the part number.De..
Thickness	508 microns	20.0 mil	overall; Arlon SQA-TMS-003
Arlon LW201C##FR-P0 Silicone Rubber Triangular cross section of self-fusing silicone tape. Interleave: 3 mil PE.
Thickness	508 microns	20.0 mil	Rubber; Arlon SQA-TMS-012
Arlon LW201R##-P0 0.020" (0.508 mm) Self-Fusing Silicone Tape (Triangular, Unsupported) Description: Level Wrap®: 1 inch wide, 20 mil thick, Red, Triangular cross-section, Self-Fusing Silicone Tape. Product is supplied in various roll lengths and the ## in the product number indicates..
Thickness	508 microns	20.0 mil	Overall thickness
Arlon R32390B020 0.020" Uncured Silicone Rubber with Fiberglass Substrate Design/Construction:Interleave: 0.003" PolyethyleneSide 1: Uncured Silicone RubberSubstrate: Prime Coated 1165 FiberglassAll ingredients of product are listed in 21 CFR 177.26000This data represe..
Thickness	508 microns	20.0 mil	Overall thickness; Arlon SQA-TMS-012
Arlon T4020-R002 0.020" Cured, Fusible Silicone Rubber with Fiberglass Substrate 0.5 inch wide, 20 mil thick, red, rectangular cross-section, fusible silicone tape.Design/Construction:Side 1: Cured Fusible Silicone RubberSubstrate: 15% Sinusoidal FiberglassSide 2: Cured Fusibl..
Thickness	508 microns	20.0 mil	Overall; Arlon SQA-TMS-003
Arlon Thermabond® 51A50X020 0.020" (0.508 mm) Uncured Silicone Rubber with Fiberglass Substrate Description: Thermabond® - Electrically insulating, thermally conductive, thermal interface material (TIM)Design/Construction: Liner: Polyethylene Side 1: Uncured Silicone RubberSubstrate: Style 76..
Thickness	508 microns	20.0 mil
3M Scotchkote™ 80BG 536 Urethane Elastomer Scotchkote Urethane Elastomer 80BG 536 has been specifically developed as an elastomeric system with a high degree of flexibility for resurfacing rubber components. Product Features:Properties simil..
Thickness	508 microns	20.0 mil	overall; Arlon SQA-TMS-003
Arlon 51276R020 Silicone Rubber/Fiberglass Laminate Side 1: cured silicone rubber; Substrate: 7628 fiberglass; Side 2: uncured silicone rubber; Interleave: 3 mil polyethylene
Thickness	508 microns	20.0 mil	Overall Thickness
Arlon 51921R020 0.020" Uncured Silicone Rubber with Fiberglass Substrate Design/Construction:Side 1: Uncured Silicone RubberSubstrate: Prime Coated 7628 FiberglassSide 2: Uncured Silicone RubberInterleave: 3 mil PEThis data represents typical values for the production ..
Thickness	508 microns	20.0 mil	Overall; Arlon SQA-TMS-003
Arlon 51986R020 0.020" (0.508 mm) Uncured/Cured Silicone Rubber with Fiberglass Substrate Design/Construction: Side 1: Cured Silicone RubberSubstrate: Style 7628 Fiberglass Side 2: Uncured Silicone Rubber Interleave: Polyethylene Product Use: Flexible heater substrateAppearance: Red colo..
Thickness	508 microns	20.0 mil	Rubber; Arlon SQA-TMS-003
Arlon LW201C##FR-P1 0.020" (0.508 mm) Self-Fusing Silicone Tape (Triangular, Unsupported) Description: High Strength, 1 inch wide, 20 mil thick, Brown, Triangular cross-section, Self-Fusing Silicone Tape. Product is supplied in various roll lengths and the ## in the product number indica..
Thickness	508 microns	20.0 mil	Overall thickness; Arlon SQA-TMS-012
Arlon T3020-B002-## 0.020" Self-Fusing, Cured Silicone Rubber Tape with Fiberglass Substrate 0.5 inch wide, 20 mil thick, black, rectangular cross-section, self-fusing silicone tape. Product is supplied in various yard long roll lengths as indicated by the ## characters in the part number...
Thickness	508 microns	20.0 mil
Daikin NEOFLON AF-2500 PFA Film NEOFLON PFA film is a high performance film made from tetrafluoroethylene and perfluoroalkyl vinyl ether (PFA).Information provided by Daikin Industries.
Thickness	508 microns	20.0 mil	Silicone; Arlon SQA-TMS-003
Arlon 44570XB025 0.025" Uncured Silicone Rubber with Fiberglass Design/Construction:Interleave: 2.5 mil PolyethyleneSide 1: Uncured Silicone RubberSubstrate: Style 1165 FiberglassThis data represents typical values for the production material and should not b..
Thickness	508 microns	20.0 mil	Overall Thickness; Arlon SQA-TMS-003
Arlon 44580R020 0.020" Uncured Silicone Rubber with Fiberglass Substrate Design/Construction:Interleave: 2.5 mil PolyethyleneSide 1: Uncured Silicone RubberSubstrate: Style 1165 Fiberglass (Flexible Heater Substrate)This data represents typical values for the producti..
Thickness	508 microns	20.0 mil	Overall; Arlon SQA-TMS-003
Arlon 44602W020W 0.020" (0.508 mm) Cured Silicone Rubber with Fiberglass Substrate Design/Construction: Interleave: Polyethylene Side 1: Cured Silicone Rubber Substrate: Style 1165 FiberglassProduct is designed to meet the FAR 25.853 App.F, P.1,.Aii flame resistance requirements b..
Thickness	508 microns	20.0 mil	Side 1; Arlon SQA-TMS-003
Arlon 31140R020 0.020" (0.508 mm) Uncured Fluorosilicone Rubber on Release Carrier Design/Construction: Interleave: PolyethyleneProduct: Uncured Fluorosilicone Rubber Carrier: Release coated HDPE Product Use: Flexible heater insulationAppearance: Red silicone gum on polymer releas..