- HOME
- POLYMER SEARCH
- Polymer Property : Melt Flow = 10 g/10 min
Polymer Property : Melt Flow = 10 g/10 min Product List
Physical PropertiesTips: 30 items are displayed at most.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Melt Flow |
10
g/10 min @Load 10.0 kg, Temperature 220 °C |
10
g/10 min @Load 22.0 lb, Temperature 428 °F |
ISO 1133 |
|
SABIC Innovative Plastics Cycolac® MG29 ABS
Super high impact ABS. Good low temperature toughness. High gloss.
|
|||
| Melt Flow |
10
g/10 min @Load 5.00 kg, Temperature 265 °C |
10
g/10 min @Load 11.0 lb, Temperature 509 °F |
[cm^3/10 min] Melt Volume Rate; ISO 1133 |
|
SABIC Innovative Plastics Cycoloy® CE8510 PC+ABS
Extrusion grade PC/ABS. Low viscosity, high impact and ductility.This data was supplied by SABIC-IP for the Americas region.
|
|||
| Melt Flow |
10
g/10 min @Load 1.20 kg, Temperature 300 °C |
10
g/10 min @Load 2.65 lb, Temperature 572 °F |
[cm^3/10 min] Melt Volume Rate; ISO 1133 |
|
SABIC Innovative Plastics Lexan® 945ASR PC
Lexan* 945ASR Polycarbonate (PC) resin is a non-filled, injection moldable grade. This non-chlorinated, non-brominated flame retardant PC has an UL-94 V0 rating and is available in transparent and t..
|
|||
| Melt Flow |
10
g/10 min @Load 1.20 kg, Temperature 300 °C |
10
g/10 min @Load 2.65 lb, Temperature 572 °F |
ASTM D 1238 |
|
SABIC Innovative Plastics Lexan® EXL1464T PC Copolymer
Lexan* EXL1464T polycarbonate (PC) siloxane copolymer resin is a transparent injection molding grade. This resin offers extreme low temperature (-40 °C) ductility in combination with medium flo..
|
|||
| Melt Flow |
10
g/10 min @Load 1.20 kg, Temperature 300 °C |
10
g/10 min @Load 2.65 lb, Temperature 572 °F |
ASTM D 1238 |
|
SABIC Innovative Plastics Lexan® EXL1464T PC Copolymer (Asia Pacific)
Lexan* EXL1464T polycarbonate (PC) siloxane copolymer resin is a transparent injection molding grade. This resin offers extreme low temperature (-40 °C) ductility in combination with medium flo..
|
|||
| Melt Flow |
10
g/10 min @Load 1.20 kg, Temperature 300 °C |
10
g/10 min @Load 2.65 lb, Temperature 572 °F |
ASTM D 1238 |
|
SABIC Innovative Plastics Lexan® EXL1483T PC Copolymer
Lexan* EXL1483T polycarbonate (PC) siloxane copolymer resin is a UV stabilized, enhanced release, transparent injection molding grade. This resin offers excellent low temperature (-30 C) ductility i..
|
|||
| Melt Flow |
10
g/10 min @Load 1.20 kg, Temperature 300 °C |
10
g/10 min @Load 2.65 lb, Temperature 572 °F |
ASTM D 1238 |
|
SABIC Innovative Plastics Lexan® FXD9945A PC (Asia Pacific)
UV stabilzed Visualfx FR PC with non-brominated and non-chlorinated flame retardant systems. It is available Only in white diffused effect(WH8B111X) meeting UL-94 V0 at 2mm for thin wall application..
|
|||
| Melt Flow |
10
g/10 min @Load 1.20 kg, Temperature 300 °C |
10
g/10 min @Load 2.65 lb, Temperature 572 °F |
[cm^3/10 min] Melt Volume Rate; ISO 1133 |
|
SABIC Innovative Plastics Lexan® FXD9945A PC (Asia Pacific)
UV stabilzed Visualfx FR PC with non-brominated and non-chlorinated flame retardant systems. It is available Only in white diffused effect(WH8B111X) meeting UL-94 V0 at 2mm for thin wall application..
|
|||
| Melt Flow |
10
g/10 min @Load 1.20 kg, Temperature 300 °C |
10
g/10 min @Load 2.65 lb, Temperature 572 °F |
ASTM D 1238 |
|
SABIC Innovative Plastics Lexan® HPX4 PC Copolymer (Europe-Africa-Middle East)
Medium flow specialty polycarbonate - improved processability & autoclavability. For medical devices and pharmaceutical applications. Healthcare management of change, biocompatible (ISO10993 or USP..
|
|||
| Melt Flow |
10
g/10 min @Load 1.20 kg, Temperature 300 °C |
10
g/10 min @Load 2.65 lb, Temperature 572 °F |
ASTM D 1238 |
|
SABIC Innovative Plastics Lexan® HPX4R PC Copolymer (Europe-Africa-Middle East)
Medium flow specialty polycarbonate with outstanding processability, ductility and autoclavability. For medical devices and pharmaceutical applications. Healthcare management of change, biocompatib..
|
|||
| Melt Flow |
10
g/10 min @Load 10.0 kg, Temperature 265 °C |
10
g/10 min @Load 22.0 lb, Temperature 509 °F |
[cm^3/10 min] Melt Volume Rate; ISO 1133 |
|
SABIC Innovative Plastics Lexan® ML3513 PC (Europe-Africa-Middle East)
LEXAN ML3513 is a high viscosity, 30% short fibre glass reinforced, flame retardant grade, especially designed for connectors and relay separators.This data was supplied by SABIC-IP for the Europe-A..
|
|||
| Melt Flow |
10
g/10 min @Load 1.20 kg, Temperature 300 °C |
10
g/10 min @Load 2.65 lb, Temperature 572 °F |
ASTM D 1238 |
|
SABIC Innovative Plastics Lexan® ML6430 PC Copolymer (Asia Pacific)
Medium viscosity PC copolymer blend with enhanced UV stabilization and added release agent. V2 rated. Available in transparent and tinted colorsThis data was supplied by SABIC-IP for the Asia Pacifi..
|
|||
| Melt Flow |
10
g/10 min @Load 1.20 kg, Temperature 300 °C |
10
g/10 min @Load 2.65 lb, Temperature 572 °F |
[cm^3/10 min] Melt Volume Rate; ISO 1133 |
|
SABIC Innovative Plastics Lexan® ML7647 PC (Europe-Africa-Middle East)
Non FR Impact modified PC, excellent Fatigue performance with balanced Flow and impact. Available in Opaque onlyThis data was supplied by SABIC-IP for the Europe-Africa-Middle East region.
|
|||
| Melt Flow |
10
g/10 min @Load 1.20 kg, Temperature 300 °C |
10
g/10 min @Load 2.65 lb, Temperature 572 °F |
ASTM D 1238 |
|
SABIC Innovative Plastics Lexan® SLX1432T PC Copolymer (Europe-Africa-Middle East)
Medium viscosity PC copolymer with enhanced UV stabilization and added release agent. Available in transparent and tinted colors.This data was supplied by SABIC-IP for the Europe-Africa-Middle East ..
|
|||
| Melt Flow |
10
g/10 min @Load 5.00 kg, Temperature 240 °C |
10
g/10 min @Load 11.0 lb, Temperature 464 °F |
[cm^3/10 min] Melt Volume Rate; ISO 1133 |
|
SABIC Innovative Plastics Geloy XTPM302 ASA+PC (Europe-Africa-Middle East)
XTPM302 is a general purpose ASA/PC injection moulding grade, available in various colors.Typical properties measured on natural material.This data was supplied by SABIC-IP for the Europe-Africa-Mid..
|
|||
| Melt Flow |
10
g/10 min @Load 1.20 kg, Temperature 300 °C |
10
g/10 min @Load 2.65 lb, Temperature 572 °F |
ASTM D 1238 |
|
SABIC Innovative Plastics Lexan® FXD1414T PC Copolymer (Europe-Africa-Middle East)
PC-siloxane copolymer in special light diffusion colors. Medium flow. Improved toughness compared to medium flow standard PC in same color. Color package may affect performance.This data was suppli..
|
|||
| Melt Flow |
10
g/10 min @Load 3.80 kg, Temperature 200 °C |
10
g/10 min @Load 8.38 lb, Temperature 392 °F |
ASTM D 1238 |
|
SABIC Innovative Plastics Lexan® SLX1431T PC Copolymer (Asia Pacific)
Medium viscosity PC copolymer blend with enhanced UV stabilization and added release agent. Available in transparent and tinted colorsThis data was supplied by SABIC-IP for the Asia Pacific region.
|
|||
| Melt Flow |
>=
10
g/10 min @Load 5.00 kg, Temperature 190 °C |
>=
10
g/10 min @Load 11.0 lb, Temperature 374 °F |
|
|
MTM Plastics Dipolen® H Recycled HDPE Blend
Dipolen® H is a granulated HDPE with other polyolefin blend for use in either extrusion or injection molding. It can be supplied unmodified or treated with additives according to customer specif..
|
|||
| Melt Flow |
10
g/10 min @Load 5.00 kg, Temperature 200 °C |
10
g/10 min @Load 11.0 lb, Temperature 392 °F |
ASTM D1238 |
|
SABIC Innovative Plastics NORYL WCP700 PPE-TPE
Flexible PPE-TPE injection grade suitable for over-molding applications such as plugs, strain relief's, and connectors. Good processability. 70 Shore A hardness.
|
|||
| Melt Flow |
10
g/10 min @Load 1.20 kg, Temperature 300 °C |
10
g/10 min @Load 2.65 lb, Temperature 572 °F |
ASTM D 1238 |
|
SABIC Innovative Plastics PC1000 PC (Asia Pacific)
PC1000 resin is a medium-low flow (MFR = 10 at 300ºC/1.2kg), heat stabilized, polycarbonate product designed for use in the custom compounding market. It does not contain UV stabilizer or mold r..
|
|||
| Melt Flow |
10
g/10 min @Load 1.20 kg, Temperature 300 °C |
10
g/10 min @Load 2.65 lb, Temperature 572 °F |
ASTM D 1238 |
|
SABIC Innovative Plastics PC1003R PC
PC1003R resin is a medium-low flow (MFR = 10 at 300ºC/1.2kg), heat and UV stabilized, polycarbonate product with mold release designed for use in the general purpose molding market.This data was ..
|
|||
| Melt Flow |
10
g/10 min @Load 6.60 kg, Temperature 337 °C |
10
g/10 min @Load 14.6 lb, Temperature 639 °F |
ASTM D 1238 |
|
SABIC Innovative Plastics Ultem DH1004F PEI
High Temperature, Transparent, Polyetherimide Blend with Improved Ductility and Enhanced Hydrostability. US FDA and EU Food Contact compliant.This data was supplied by SABIC-IP for the Americas regi..
|
|||
| Melt Flow |
10
g/10 min @Load 3.80 kg, Temperature 230 °C |
10
g/10 min @Load 8.38 lb, Temperature 446 °F |
ASTM D1238 |
|
Techmer ES Plastiblend® ABS 8007
Availability: North AmericaForms: PelletsFeatures: General Purpose and High FlowInformation provided by TP Composites, Inc.
|
|||
| Melt Flow |
10
g/10 min @Load 1.20 kg, Temperature 300 °C |
10
g/10 min @Load 2.65 lb, Temperature 572 °F |
ASTM D1238 |
|
Samsung Cheil Industries Infino® MKD-1016 PA, 55% Glass Filled
Information provided by Samsung Cheil Industries.
|
|||
| Melt Flow |
10
g/10 min @Load 10.0 kg, Temperature 220 °C |
10
g/10 min @Load 22.0 lb, Temperature 428 °F |
ISO 1133 |
|
Styron MAGNUMâ„¢ 3325 MT Acrylonitrile Butadiene Styrene (ABS) Resin
Overview: MAGNUMâ„¢ 3325 MT is a resin with excellent processing characteristics and matt surface finish. The mass (continuous process) ABS technology of Styron ensures an ABS resin that combines..
|
|||
| Melt Flow |
10
g/10 min @Load 2.16 kg, Temperature 265 °C |
10
g/10 min @Load 4.76 lb, Temperature 509 °F |
ASTM D1238 |
|
SABIC Innovative Plastics XYLEX X8210 PC+POLYESTER
PC+POLYESTER alloy. Unreinforced, transparent, impact modified for low temperature ductility
|
|||
| Melt Flow |
10
g/10 min @Load 2.16 kg, Temperature 190 °C |
10
g/10 min @Load 4.76 lb, Temperature 374 °F |
ASTM D1238 |
|
DuPont Performance Polymers Hytrel® G3548L TPC-ET
(Unverified Data**)
Hytrel® G3548L is a low modulus grade with nominal hardness of 35D. It contains non-discoloring stabilizer. It can be processed by many conventional thermoplastic processing techniques like injec..
|
|||
| Melt Flow |
10
g/10 min @Load 2.16 kg, Temperature 230 °C |
10
g/10 min @Load 4.76 lb, Temperature 446 °F |
cm³/10min; ISO 1133 |
|
DuPont Performance Polymers Hytrel® G5544 Polyester Elastomer TPC-ET
(Unverified Data**)
55 Shore D Standard Performance Polyester Elastomer with Heat Ageing ProtectionHytrel G5544 is a medium modulus grade with nominal hardness of 55D. It contains discoloring stabilizer. It can be proc..
|
|||
| Melt Flow |
10
g/10 min @Load 10.0 kg, Temperature 230 °C |
10
g/10 min @Load 22.0 lb, Temperature 446 °F |
cm³/10min; ISO 1133 |
|
DuPont Performance Polymers Hytrel® HTR8223 BK320 Polyester Elastomer TPC-ET
(Unverified Data**)
42 Shore D High Viscosity Polyester Elastomer Developed for Blow MoldingInformation provided by DuPont Performance Polymers
|
|||
| Melt Flow |
10
g/10 min @Load 5.00 kg, Temperature 230 °C |
10
g/10 min @Load 11.0 lb, Temperature 446 °F |
ASTM D1238 |
|
Solvay Specialty Polymers Solef® 1009 PVDF Homopolymer
(discontinued **)
Key features of this grade: Mean Viscosity, All Purpose, Injection/Extrusion, Virgin. Recommended processing is extrusion. Available as powder & granules.General information about SOLEF® PVDF: SO..
|
|||
Copyright © lookpolymers.com All Rights Reserved