- HOME
- POLYMER SEARCH
- Polymer Property : Melt Flow = 10 g/10 min
Polymer Property : Melt Flow = 10 g/10 min Product List
Physical PropertiesTips: 30 items are displayed at most.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Melt Flow |
10
-
17.5
g/10 min @Load 21.6 kg, Temperature 190 °C |
10
-
17.5
g/10 min @Load 47.6 lb, Temperature 374 °F |
Flow@21.6kg/Flow@2.16kg ratio > 50; ASTM D1283 |
|
NIZHNEKAMSKNEFTEKHIM PE 4850B (504H3) High Density Polyethylene
Product obtained by gas phase polymerization of ethylene in presence of complex metalorganic catalysts.Information provided by manufacturer
|
|||
| Melt Flow |
10
g/10 min @Load 1.20 kg, Temperature 300 °C |
10
g/10 min @Load 2.65 lb, Temperature 572 °F |
ASTM D 1238 |
|
SABIC Innovative Plastics Lexan® 945ASR PC
Lexan* 945ASR Polycarbonate (PC) resin is a non-filled, injection moldable grade. This non-chlorinated, non-brominated flame retardant PC has an UL-94 V0 rating and is available in transparent and t..
|
|||
| Melt Flow |
10
g/10 min @Load 1.20 kg, Temperature 300 °C |
10
g/10 min @Load 2.65 lb, Temperature 572 °F |
[cm^3/10 min] Melt Volume Rate; ISO 1133 |
|
SABIC Innovative Plastics Lexan® 945ASR PC
Lexan* 945ASR Polycarbonate (PC) resin is a non-filled, injection moldable grade. This non-chlorinated, non-brominated flame retardant PC has an UL-94 V0 rating and is available in transparent and t..
|
|||
| Melt Flow |
10
g/10 min @Load 1.20 kg, Temperature 300 °C |
10
g/10 min @Load 2.65 lb, Temperature 572 °F |
ASTM D 1238 |
|
SABIC Innovative Plastics Lexan® 945ASR PC (Asia Pacific)
Lexan* 945ASR Polycarbonate (PC) resin is a non-filled, injection moldable grade. This non-chlorinated, non-brominated flame retardant PC has an UL-94 V0 rating and is available in transparent and t..
|
|||
| Melt Flow |
10
g/10 min @Load 1.20 kg, Temperature 300 °C |
10
g/10 min @Load 2.65 lb, Temperature 572 °F |
ASTM D 1238 |
|
SABIC Innovative Plastics Lexan® EXL1463T PC Copolymer (Europe-Africa-Middle East)
Lexan* EXL1463T polycarbonate (PC) siloxane copolymer resin is a transparent injection molding grade. This resin offers excellent low temperature (-30 C) ductility in combination with medium flow ch..
|
|||
| Melt Flow |
10
g/10 min @Load 1.20 kg, Temperature 300 °C |
10
g/10 min @Load 2.65 lb, Temperature 572 °F |
ASTM D 1238 |
|
SABIC Innovative Plastics Lexan® EXL1493T PC Copolymer
Lexan* EXL1493T polycarbonate (PC) siloxane copolymer resin is an injection molding grade with FDA and EU food contact compliance, with mold release. This resin offers excellent low temperature (-3..
|
|||
| Melt Flow |
10
g/10 min @Load 1.20 kg, Temperature 300 °C |
10
g/10 min @Load 2.65 lb, Temperature 572 °F |
ASTM D 1238 |
|
SABIC Innovative Plastics Lexan® FXD1433T PC Copolymer
Clear PC-siloxane copolymer with excellent processability in special light diffusion colors. Medium flow, UV stabilized. Improved toughness compared to standard PC in same color. Color package may ..
|
|||
| Melt Flow |
10
g/10 min @Load 1.20 kg, Temperature 300 °C |
10
g/10 min @Load 2.65 lb, Temperature 572 °F |
[cm^3/10 min] Melt Volume Rate; ISO 1133 |
|
SABIC Innovative Plastics Lexan® FXD9945A PC
UV stabilzed Visualfx FR PC with non-brominated and non-chlorinated flame retardant systems. It is available Only in white diffused effect(WH8B111X) meeting UL-94 V0 at 2mm for thin wall application..
|
|||
| Melt Flow |
10
g/10 min @Load 1.20 kg, Temperature 300 °C |
10
g/10 min @Load 2.65 lb, Temperature 572 °F |
ASTM D 1238 |
|
SABIC Innovative Plastics Lexan® HPM1944 PC (Europe-Africa-Middle East)
Medium flow specialty polycarbonate with enhanced hemocompatibility. For medical devices and pharmaceutical applications. Healthcare management of change, biocompatible (ISO10993 or USP Class VI). ..
|
|||
| Melt Flow |
10
g/10 min @Load 1.20 kg, Temperature 300 °C |
10
g/10 min @Load 2.65 lb, Temperature 572 °F |
ASTM D 1238 |
|
SABIC Innovative Plastics Lexan® ML6430 PC Copolymer (Asia Pacific)
Medium viscosity PC copolymer blend with enhanced UV stabilization and added release agent. V2 rated. Available in transparent and tinted colorsThis data was supplied by SABIC-IP for the Asia Pacifi..
|
|||
| Melt Flow |
10
g/10 min @Load 3.80 kg, Temperature 200 °C |
10
g/10 min @Load 8.38 lb, Temperature 392 °F |
ASTM D 1238 |
|
SABIC Innovative Plastics Lexan® SLX1431T PC Copolymer
Medium viscosity PC copolymer blend with enhanced UV stabilization and added release agent. Available in transparent and tinted colorsThis data was supplied by SABIC-IP for the Americas region.
|
|||
| Melt Flow |
10
g/10 min @Load 3.80 kg, Temperature 200 °C |
10
g/10 min @Load 8.38 lb, Temperature 392 °F |
ASTM D 1238 |
|
SABIC Innovative Plastics Lexan® SLX1431T PC Copolymer (Europe-Africa-Middle East)
Medium viscosity PC copolymer blend with enhanced UV stabilization and added release agent. Available in transparent and tinted colorsThis data was supplied by SABIC-IP for the Europe-Africa-Middle ..
|
|||
| Melt Flow |
10
g/10 min @Load 1.20 kg, Temperature 300 °C |
10
g/10 min @Load 2.65 lb, Temperature 572 °F |
ASTM D 1238 |
|
SABIC Innovative Plastics Lexan® SLX2431D PC Copolymer (Asia Pacific)
Medium viscosity PC copolymer blend with enhanced UV stabilization and added release agent. V2 rated. Available in diffusion colors.This data was supplied by SABIC-IP for the Asia Pacific region.
|
|||
| Melt Flow |
10
g/10 min @Load 1.20 kg, Temperature 300 °C |
10
g/10 min @Load 2.65 lb, Temperature 572 °F |
ASTM D 1238 |
|
SABIC Innovative Plastics Lexan® SLX2432D PC Copolymer
Medium viscosity PC copolymer with enhanced UV stabilization and added release agent. V2 rated. Available in diffusion colors.This data was supplied by SABIC-IP for the Americas region.
|
|||
| Melt Flow |
10
g/10 min @Load 10.0 kg, Temperature 220 °C |
10
g/10 min @Load 22.0 lb, Temperature 428 °F |
[cm^3/10 min] Melt Volume Rate; ISO 1133 |
|
SABIC Innovative Plastics Geloy XTPM302 ASA+PC (Europe-Africa-Middle East)
XTPM302 is a general purpose ASA/PC injection moulding grade, available in various colors.Typical properties measured on natural material.This data was supplied by SABIC-IP for the Europe-Africa-Mid..
|
|||
| Melt Flow |
10
g/10 min @Load 1.20 kg, Temperature 300 °C |
10
g/10 min @Load 2.65 lb, Temperature 572 °F |
ASTM D 1238 |
|
SABIC Innovative Plastics Lexan® FXD9945A PC (Europe-Africa-Middle East)
UV stabilzed Visualfx FR PC with non-brominated and non-chlorinated flame retardant systems. It is available Only in white diffused effect(WH8B111X) meeting UL-94 V0 at 2mm for thin wall application..
|
|||
| Melt Flow |
10
g/10 min @Load 3.80 kg, Temperature 200 °C |
10
g/10 min @Load 8.38 lb, Temperature 392 °F |
ASTM D 1238 |
|
SABIC Innovative Plastics Lexan® SLX1431T PC Copolymer (Asia Pacific)
Medium viscosity PC copolymer blend with enhanced UV stabilization and added release agent. Available in transparent and tinted colorsThis data was supplied by SABIC-IP for the Asia Pacific region.
|
|||
| Melt Flow |
10
g/10 min @Load 5.00 kg, Temperature 200 °C |
10
g/10 min @Load 11.0 lb, Temperature 392 °F |
ASTM D1238 (G) |
|
LG Chemical GPPS 15NF(I) PS, High Transparency, Heat Resistance
Description: Injection Molding, PS, High Transparency, Heat ResistanceApplication: Food Container, Merchandise, Artificial Woods, Refrigerator Vegetable Box, PSP, Sheet, Film, etc.CAS: 9003-53-6-5In..
|
|||
| Melt Flow |
10
g/10 min @Load 21.6 kg, Temperature 190 °C |
10
g/10 min @Load 47.6 lb, Temperature 374 °F |
ISO 1133 |
|
Iran Petrochemical (PCC) HB5510 High Density Polyethylene
HB-5510 is a high molecular weight high density polyethylene.Applications: extrusion large blow moldings, jerry cans, film and blown bags.Information provided by Iran Petrochemical Commercial Co.
|
|||
| Melt Flow |
10
g/10 min @Load 1.20 kg, Temperature 300 °C |
10
g/10 min @Load 2.65 lb, Temperature 572 °F |
ASTM D 1238 |
|
SABIC Innovative Plastics PC1000 PC
PC1000 resin is a medium-low flow (MFR = 10 at 300ºC/1.2kg), heat stabilized, polycarbonate product designed for use in the custom compounding market. It does not contain UV stabilizer or mold r..
|
|||
| Melt Flow |
10
g/10 min @Load 1.20 kg, Temperature 300 °C |
10
g/10 min @Load 2.65 lb, Temperature 572 °F |
ASTM D 1238 |
|
SABIC Innovative Plastics PC1000R PC (Asia Pacific)
PC1000R resin is a medium-low flow (MFR = 10 at 300ºC/1.2kg), heat stabilized, polycarbonate product with mold release designed for use in the general purpose molding market.This data was supplie..
|
|||
| Melt Flow |
10
g/10 min @Load 1.20 kg, Temperature 300 °C |
10
g/10 min @Load 2.65 lb, Temperature 572 °F |
ASTM D1238 |
|
Samsung Cheil Industries Infino® MKD-1016 PA, 55% Glass Filled
Information provided by Samsung Cheil Industries.
|
|||
| Melt Flow |
10
g/10 min @Load 5.00 kg, Temperature 280 °C |
10
g/10 min @Load 11.0 lb, Temperature 536 °F |
[cm^3/10 min] Melt Volume Rate; ISO 1133 |
|
SABIC Innovative Plastics Noryl GTX GTX8710 PPE+PA
Noryl GTX8710 resin is a glass filled, high performance blend of PPE/PA that exhibits an exceptional balance of high-heat resistance, strength, flow, and conductivity. This grade can be electro-sta..
|
|||
| Melt Flow |
10
g/10 min @Load 2.16 kg, Temperature 265 °C |
10
g/10 min @Load 4.76 lb, Temperature 509 °F |
[cm^3/10 min] Melt Volume Rate; ISO 1133 |
|
SABIC Innovative Plastics Xylex FXY391DF PC+POLYESTER (Asia Pacific)
PC+Polyester alloy in Diffusion Visual fx. This grade is compliant with US FDA/European food contact regulations. Color package may influence performance.This data was supplied by SABIC-IP for the A..
|
|||
| Melt Flow |
10
g/10 min @Load 2.16 kg, Temperature 265 °C |
10
g/10 min @Load 4.76 lb, Temperature 509 °F |
ASTM D1238 |
|
SABIC Innovative Plastics XYLEX X8210 PC+POLYESTER (Asia Pacific)
PC+POLYESTER alloy. Unreinforced, transparent, impact modified for low temperature ductility
|
|||
| Melt Flow |
10
g/10 min @Load 2.16 kg, Temperature 265 °C |
10
g/10 min @Load 4.76 lb, Temperature 509 °F |
ASTM D1238 |
|
SABIC Innovative Plastics XYLEX X8210 PC+POLYESTER (Europe-Africa-Middle East)
PC+POLYESTER alloy. Unreinforced, transparent, impact modified for low temperature ductility
|
|||
| Melt Flow |
10
g/10 min @Load 10.0 kg, Temperature 220 °C |
10
g/10 min @Load 22.0 lb, Temperature 428 °F |
ISO 1133 |
|
Styron Magnumâ„¢ 3325 MT Acrylonitrile Butadiene Styrene (ABS)
MAGNUMâ„¢ 3325 MT is resin with excellent processing characteristics and a matt surface finish. The mass (continuous process) ABS technology of Dow ensures an ABS resin that combines excellent p..
|
|||
| Melt Flow |
10
g/10 min @Load 10.0 kg, Temperature 230 °C |
10
g/10 min @Load 22.0 lb, Temperature 446 °F |
cm³/10min; ISO 1133 |
|
DuPont Performance Polymers Hytrel® HTR8223 BK320 Polyester Elastomer TPC-ET
(Unverified Data**)
42 Shore D High Viscosity Polyester Elastomer Developed for Blow MoldingInformation provided by DuPont Performance Polymers
|
|||
| Melt Flow |
10
g/10 min @Load 2.16 kg, Temperature 250 °C |
10
g/10 min @Load 4.76 lb, Temperature 482 °F |
[cm^3/10 min] Melt Volume Rate; ISO 1133 |
|
SABIC Innovative Plastics Valox® VX4029 PBT (Europe-Africa-Middle East)
VALOX VX4029 is a 30% glass reinforced PBT injection moulding resin with excellent strength, stiffness, dimensional stability and high heat resistance. This grade is a 420 with reduced additive load..
|
|||
| Melt Flow |
10
g/10 min @Load 2.16 kg, Temperature 265 °C |
10
g/10 min @Load 4.76 lb, Temperature 509 °F |
[cm^3/10 min] Melt Volume Rate; ISO 1133 |
|
SABIC Innovative Plastics Xylex FXY391DF PC+POLYESTER (Europe-Africa-Middle East)
PC+Polyester alloy in Diffusion Visual fx. This grade is compliant with US FDA/European food contact regulations. Color package may influence performance.This data was supplied by SABIC-IP for the E..
|
|||
Copyright © lookpolymers.com All Rights Reserved