- HOME
- POLYMER SEARCH
- Polymer Property : Melt Flow = 16 g/10 min
Polymer Property : Melt Flow = 16 g/10 min Product List
Physical PropertiesTips: 30 items are displayed at most.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Melt Flow |
16
g/10 min @Load 21.6 kg, Temperature 190 °C |
16
g/10 min @Load 47.6 lb, Temperature 374 °F |
ASTM D1238 |
|
SABIC F01552 High Density Polyethylene for Blown Film
Product Description: F01552 is a high molecular weight high density polyethylene copolymer grade specifically designed for blown film applications. Its high molecular weight, broad molecular weigh..
|
|||
| Melt Flow |
16
g/10 min @Load 10.0 kg, Temperature 220 °C |
16
g/10 min @Load 22.0 lb, Temperature 428 °F |
ISO 1133 |
|
SABIC Innovative Plastics Cycolac® INP562 ABS+SAN
SABIC INP562 provides compatibility with a wider range of ABS grades than many color concentrate bases; allows better dispersion than pellets; allows concentrate manufacturers to produce both pellet..
|
|||
| Melt Flow |
16
g/10 min @Load 10.0 kg, Temperature 220 °C |
16
g/10 min @Load 22.0 lb, Temperature 428 °F |
ISO 1133 |
|
SABIC Innovative Plastics Cycolac® INP572 ABS
High molecular weight SAN, functions as a carrier resin for color concentrates. Can be used as compounding additives for polymer blends. Can be blended with high rubber graft modifier resins to pro..
|
|||
| Melt Flow |
16
g/10 min @Load 10.0 kg, Temperature 220 °C |
16
g/10 min @Load 22.0 lb, Temperature 428 °F |
ISO 1133 |
|
SABIC Innovative Plastics Cycolac® INP572 ABS+SAN
High molecular weight SAN, functions as a carrier resin for color concentrates. Can be used as compounding additives for polymer blends. Can be blended with high rubber graft modifier resins to pro..
|
|||
| Melt Flow |
16
g/10 min @Load 10.0 kg, Temperature 220 °C |
16
g/10 min @Load 22.0 lb, Temperature 428 °F |
ISO 1133 |
|
SABIC Innovative Plastics Cycolac® MG37CR ABS (Asia Pacific)
High performance, injection molding ABS. Overall balance of physical properties, good processability and chemical resistance.This data was supplied by SABIC-IP for the Asia Pacific region.
|
|||
| Melt Flow |
16
g/10 min @Load 5.00 kg, Temperature 260 °C |
16
g/10 min @Load 11.0 lb, Temperature 500 °F |
ASTM D 1238 |
|
SABIC Innovative Plastics Cycoloy® CP8930 PC+ABS (Europe-Africa-Middle East)
High heat, PC/ABS for automotive electro plating applications, excellent balance in flow/impactThis data was supplied by SABIC-IP for the Europe-Africa-Middle East region.
|
|||
| Melt Flow |
16
g/10 min @Load 2.16 kg, Temperature 260 °C |
16
g/10 min @Load 4.76 lb, Temperature 500 °F |
ASTM D 1238 |
|
SABIC Innovative Plastics Cycoloy® CX7510 PC+ABS
Cycoloy* CX7510 resin is an injection moldable, flame retardant PC/ABS blend, with non-chlorinated & non-brominated flame retardants. Key features of Cycoloy CX7510 resin include high heat, high flo..
|
|||
| Melt Flow |
16
g/10 min @Load 2.16 kg, Temperature 260 °C |
16
g/10 min @Load 4.76 lb, Temperature 500 °F |
ASTM D 1238 |
|
SABIC Innovative Plastics Cycoloy® CX7510 PC+ABS (Asia Pacific)
Cycoloy* CX7510 resin is an injection moldable, flame retardant PC/ABS blend, with non-chlorinated & non-brominated flame retardants. Key features of Cycoloy CX7510 resin include high heat, high flo..
|
|||
| Melt Flow |
16
g/10 min @Load 2.16 kg, Temperature 260 °C |
16
g/10 min @Load 4.76 lb, Temperature 500 °F |
ASTM D1238 |
|
PTS PCA-2201NH Non Bromine, Non Chlorine Flame Retardant Polycarbonate/ABS Alloy
Information provided by Polymer Technology and Services, LLC (PTS).
|
|||
| Melt Flow |
16
g/10 min @Load 5.00 kg, Temperature 200 °C |
16
g/10 min @Load 11.0 lb, Temperature 392 °F |
ASTM D1238 |
|
PolyOne Dynaflex™ G2780-0001 Thermoplastic Elastomer (TPE)
Dynaflex™ G2780-0001 is an easy processing TPE designed for injection molding and extrusion applications that require FDA compliance. - Excellent Colorability - Good Ozone and UV Stability - Overmo..
|
|||
| Melt Flow |
16
g/10 min @Load 1.20 kg, Temperature 300 °C |
16
g/10 min @Load 2.65 lb, Temperature 572 °F |
[cm^3/10 min] Melt Volume Rate; ISO 1133 |
|
SABIC Innovative Plastics Lexan® HPS2S PC
Med/high flow polycarbonate. For medical devices and pharmaceutical applications. Healthcare management of change, biocompatible (ISO10993 or USP Class VI). EtO, steam, e-beam, and gamma steriliza..
|
|||
| Melt Flow |
16
g/10 min @Load 1.20 kg, Temperature 300 °C |
16
g/10 min @Load 2.65 lb, Temperature 572 °F |
[cm^3/10 min] Melt Volume Rate; ISO 1133 |
|
SABIC Innovative Plastics Lexan® SLX1231T PC Copolymer (Europe-Africa-Middle East)
Low viscosity PC copolymer blend with enhanced UV stabilization and added release agent. Available in transparent and tinted colorsThis data was supplied by SABIC-IP for the Europe-Africa-Middle Eas..
|
|||
| Melt Flow |
16
g/10 min @Load 1.20 kg, Temperature 300 °C |
16
g/10 min @Load 2.65 lb, Temperature 572 °F |
[cm^3/10 min] Melt Volume Rate; ISO 1133 |
|
SABIC Innovative Plastics Lexan® SLX2231D PC Copolymer (Asia Pacific)
Low viscosity PC copolymer blend with enhanced UV stabilization and added release agent. V2 rated. Diffusion colors.This data was supplied by SABIC-IP for the Asia Pacific region.
|
|||
| Melt Flow |
16
g/10 min @Load 1.20 kg, Temperature 300 °C |
16
g/10 min @Load 2.65 lb, Temperature 572 °F |
[cm^3/10 min] Melt Volume Rate; ISO 1133 |
|
SABIC Innovative Plastics Lexan® XHT1143 PC (Europe-Africa-Middle East)
XHT1143 is a high flow, UV stabilized, high heat polycarbonate copolymer. It is the lowest heat, UV stabilized product in the LEXAN* XHT portfolio. It is available in a range of opaque and limited ..
|
|||
| Melt Flow |
16
g/10 min @Load 5.00 kg, Temperature 260 °C |
16
g/10 min @Load 11.0 lb, Temperature 500 °F |
[cm^3/10 min] Melt Volume Rate; ISO 1133 |
|
SABIC Innovative Plastics Geloy XTPM307 ASA+PC (Europe-Africa-Middle East)
XTPM307 is a high heat resistant PC/ASA with improved processing stability over HRA150. Typical values measured on natural material.This data was supplied by SABIC-IP for the Europe-Africa-Middle Ea..
|
|||
| Melt Flow |
16
-
20
g/10 min @Load 2.16 kg, Temperature 190 °C |
16
-
20
g/10 min @Load 4.76 lb, Temperature 374 °F |
ASTM D1283/L |
|
NIZHNEKAMSKNEFTEKHIM PE 4052V (52418) High Density Polyethylene
Product obtained by gas phase polymerization of ethylene in presence of complex metalorganic catalysts.Information provided by manufacturer
|
|||
| Melt Flow |
16
g/10 min @Load 5.00 kg, Temperature 360 °C |
16
g/10 min @Load 11.0 lb, Temperature 680 °F |
[cm^3/10 min] Melt Volume Rate; ISO 1133 |
|
SABIC Innovative Plastics Ultem 1100EF PEI
Enhanced flow Polyetherimide (Tg 217C) with internal mold release. ECO Conforming, U.S. FDA and EU Food Contact compliant.This data was supplied by SABIC-IP for the Americas region.
|
|||
| Melt Flow |
16
g/10 min @Load 5.00 kg, Temperature 360 °C |
16
g/10 min @Load 11.0 lb, Temperature 680 °F |
[cm^3/10 min] Melt Volume Rate; ISO 1133 |
|
SABIC Innovative Plastics Ultem 1100EF PEI (Asia Pacific)
Enhanced flow Polyetherimide (Tg 217C) with internal mold release. ECO Conforming, U.S. FDA and EU Food Contact compliant.This data was supplied by SABIC-IP for the Asia Pacific region.
|
|||
| Melt Flow |
16
g/10 min @Load 5.00 kg, Temperature 220 °C |
16
g/10 min @Load 11.0 lb, Temperature 428 °F |
[cm^3/10 min] Melt Volume Rate; ISO 1133 |
|
SABIC Innovative Plastics Ultem 1100FV PEI (Asia Pacific)
Standard flow Polyetherimide (Tg 217C). ECO Conforming, UL94 V0 and 5VA listing; color dependant, see UL Yellow Card. US FDA and EU Food Contact compliant.This data was supplied by SABIC-IP for th..
|
|||
| Melt Flow |
16
g/10 min @Load 6.60 kg, Temperature 337 °C |
16
g/10 min @Load 14.6 lb, Temperature 639 °F |
ASTM D 1238 |
|
SABIC Innovative Plastics Ultem 1110FV PEI
Enhanced flow Polyetherimide (Tg 217C). ECO Conforming, UL94 V0 and 5VA; color dependant, see UL Yellow Card. US FDA and EU Food Contact compliant, NSF 51 listing.This data was supplied by SABIC-I..
|
|||
| Melt Flow |
16
g/10 min @Load 6.60 kg, Temperature 337 °C |
16
g/10 min @Load 14.6 lb, Temperature 639 °F |
ASTM D 1238 |
|
SABIC Innovative Plastics Ultem 1110R PEI (Europe-Africa-Middle East)
Enhanced flow Polyetherimide (Tg 217C) with internal mold release. ECO Conforming.This data was supplied by SABIC-IP for the Europe-Africa-Middle East region.
|
|||
| Melt Flow |
16
g/10 min @Load 1.20 kg, Temperature 266 °C |
16
g/10 min @Load 2.65 lb, Temperature 511 °F |
ASTM D1238 |
|
SABIC Innovative Plastics Valox® 815F PBT+PET (Europe-Africa-Middle East)
PBT+PET, 15% Glass, Mold Release, Heat Stabilized, For food contact applications
|
|||
| Melt Flow |
16
g/10 min @Load 5.00 kg, Temperature 250 °C |
16
g/10 min @Load 11.0 lb, Temperature 482 °F |
ISO 1133 |
|
SABIC Innovative Plastics Xenoy® 1105 PBT+PC (Asia Pacific)
PBT/PC blend, injection molding grade, non-reinforced, impact modified, excellent toughness at low temperatures, very good paintability
|
|||
| Melt Flow |
16
g/10 min @Load 5.00 kg, Temperature 200 °C |
16
g/10 min @Load 11.0 lb, Temperature 392 °F |
ISO 1133 |
|
Styrolution Styrolux 656C SBC
Styrolux 656C is a high flow thermoplastic injection molding styrene-butadiene block copolymer. It has crystal clarity, good toughness, good stiffness, and warpage resistance for general molding ap..
|
|||
| Melt Flow |
16
g/10 min @Load 2.16 kg, Temperature 265 °C |
16
g/10 min @Load 4.76 lb, Temperature 509 °F |
ASTM D1238 |
|
SABIC Innovative Plastics Valox® 830 PBT (Europe-Africa-Middle East)
VALOX 830 is a 30% glass fibre reinforced PBT+PET blend with excellent surface finish. Applications: hot air gun housing assemblies, industrial glue guns, appliance housings and handles.
|
|||
| Melt Flow |
16
g/10 min @Load 3.80 kg, Temperature 230 °C |
16
g/10 min @Load 8.38 lb, Temperature 446 °F |
ASTM D1238 |
|
Chi Mei Kibisan® PN107 SAN Resin, General Purpose
Product CharacteristicsWater ClearHigh RigidityMedium FlowInformation provided by Calsak Corporation
|
|||
| Melt Flow |
16
-
26
g/10 min @Load 3.80 kg, Temperature 230 °C |
16
-
26
g/10 min @Load 8.38 lb, Temperature 446 °F |
ASTM D1238 |
|
Solvay Specialty Polymers Solef® 9007 Polyvinylidene Fluoride (PVDF)
(Unverified Data**)
Solef® 9007 PVDF homopolymer has low viscosity and is used in film extrusion and injection molding.Information provided by Solvay Specialty Polymers.
|
|||
| Melt Flow |
16
g/10 min @Load 1.20 kg, Temperature 300 °C |
16
g/10 min @Load 2.65 lb, Temperature 572 °F |
[cm^3/10 min] Melt Volume Rate; ISO 1133 |
|
SABIC Innovative Plastics Lexan® ML6230 PC Copolymer (Asia Pacific)
Low viscosity PC copolymer blend with enhanced UV stabilization and added release agent. Available in transparent and tinted colors.This data was supplied by SABIC-IP for the Asia Pacific region.
|
|||
| Melt Flow |
16
g/10 min @Load 1.20 kg, Temperature 300 °C |
16
g/10 min @Load 2.65 lb, Temperature 572 °F |
[cm^3/10 min] Melt Volume Rate; ISO 1133 |
|
SABIC Innovative Plastics Lexan® ML6230 PC Copolymer (Europe-Africa-Middle East)
Low viscosity PC copolymer blend with enhanced UV stabilization and added release agent. Available in transparent and tinted colors.This data was supplied by SABIC-IP for the Europe-Africa-Middle Ea..
|
|||
| Melt Flow |
16
g/10 min @Load 5.00 kg, Temperature 300 °C |
16
g/10 min @Load 11.0 lb, Temperature 572 °F |
[cm^3/10 min] Melt Volume Rate; ISO 1133 |
|
SABIC Innovative Plastics Lexan® SD9705 PC Copolymer (Europe-Africa-Middle East)
High visocisty PC Copolymer, low smoke, flame retardant resinThis data was supplied by SABIC-IP for the Europe-Africa-Middle East region.
|
|||
Copyright © lookpolymers.com All Rights Reserved