- HOME
- POLYMER SEARCH
- Polymer Property : Storage Temperature = 41.0 °F
Polymer Property : Storage Temperature = 41.0 °F Product List
Physical PropertiesTips: 30 items are displayed at most.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Storage Temperature | 5.00 - 25.0 °C | 41.0 - 77.0 °F | |
|
Permabond CSA-NF Cyanoacrylate Surface Activator
Permabond C Surface Activator (CSA-NF) is used in conjunction with Permabond cyanoacrylate adhesives to promote a faster cure and to extend their gap-filling capabilities. It significantly reduces t..
|
|||
| Storage Temperature | 5.00 - 25.0 °C | 41.0 - 77.0 °F | |
|
Permabond ET5401 Epoxy Resin
PERMABOND® ET5401 is a two-part, 2:1 mixable, semi-flexible toughened no slump epoxy adhesive with good adhesion to a variety of substrates such as wood, metal, ceramics and some plastics and compo..
|
|||
| Storage Temperature | 5.00 - 25.0 °C | 41.0 - 77.0 °F | |
|
Permabond HL126 Anaerobic Threadlocker
PERMABOND® HL126 Threadlocker is a water thin product for locking pre-assembled parts through wicking action. PERMABOND® HL126 Threadlocker prevents vibration loosening. Because of the low viscosi..
|
|||
| Storage Temperature | 5.00 - 25.0 °C | 41.0 - 77.0 °F | |
|
Permabond HL138 Anaerobic Retaining Compound
Permabond® HL138 is a single component liquid that cures only when in contact with metal parts and oxygen is excluded. The liquid adhesive fills the “air space” between parts and upon cure which ..
|
|||
| Storage Temperature | 5.00 - 25.0 °C | 41.0 - 77.0 °F | |
|
Permabond HM162 Anaerobic Retainer
Permabond® HM162 is a medium viscosity retaining compound that cures when confined between metal parts to form an extremely tough bond. It is best suited for cylindrical parts and where high temper..
|
|||
| Storage Temperature | 5.00 - 25.0 °C | 41.0 - 77.0 °F | |
|
Permabond LH150 Anaerobic Threadsealant
Permabond® LH150 Pipe Sealant with PTFE is designed for sealing and locking tapered metal pipe threads and fittings. It is ideal for stainless steel and other passive metals. Instant sealing of up ..
|
|||
| Storage Temperature | 5.00 - 25.0 °C | 41.0 - 77.0 °F | |
|
Permabond TA439 Toughened Acrylic Adhesive
Permabond® TA439 is a two component structural acrylic adhesive designed primarily for bonding metals, ferrites, ceramics and some plastics. The typical fixture time of is 10-30 seconds. The fast f..
|
|||
| Storage Temperature | 5.00 - 25.0 °C | 41.0 - 77.0 °F | |
|
Permabond TA459 Toughened Acrylic Adhesive
Permabond TA459 is a structural acrylic adhesive designed primarily for bonding metals, ferrites, ceramics and some thermoplastics. This product was specifically designed to be non-corrosive to sens..
|
|||
| Storage Temperature | 5.00 - 25.0 °C | 41.0 - 77.0 °F | |
|
Permabond TA4590 Toughened Acrylic Adhesive
Permabond TA4590 is a structural acrylic adhesive designed primarily for bonding metals, ferrites, ceramics and some thermoplastics. This product was specifically designed to be non-corrosive to sen..
|
|||
| Storage Temperature | 5.00 - 25.0 °C | 41.0 - 77.0 °F | |
|
Permabond TA4820 Structural Acrylic Adhesive
PERMABOND TA4820 is a 2-part, 1:1 toughened methacrylate adhesive designed for bonding thermoplastics, thermosets, metals and composites. TA4820 has excellent adhesion to as received metal surfac..
|
|||
| Storage Temperature | 5.00 - 25.0 °C | 41.0 - 77.0 °F | |
|
Permabond UV620 UV-curable Adhesive
PERMABOND UV620 is a single part, fast curing, UV curable adhesive. Its excellent optical clarity and resistance to yellowing make it ideal for bonding glass and crystal for a high quality finish. I..
|
|||
| Storage Temperature | 5.00 - 25.0 °C | 41.0 - 77.0 °F | |
|
Permabond UV625 UV-curable Adhesive
PERMABOND UV625 is a single part, fast curing, UV curable adhesive primarily designed for bonding and sealing glass and metal. The cured adhesive is tough, flexible and has excellent impact resistan..
|
|||
| Storage Temperature | 5.00 - 25.0 °C | 41.0 - 77.0 °F | |
|
Permabond UV640 UV-curable Adhesive
PERMABOND UV640 is a single part, fast setting, and UV curable adhesive designed specifically for bonding plastics. This material has excellent adhesion to a variety of plastics including polycarbon..
|
|||
| Storage Temperature | 5.00 - 25.0 °C | 41.0 - 77.0 °F | |
|
Permabond UV670 UV-curable Adhesive
PERMABOND UV670 is a single part, fast curing, UV curable adhesive. The cured adhesive is tough, flexible and has excellent impact resistance. Permabond UV670 is well suited for bonding glass to met..
|
|||
| Storage Temperature | 5.00 - 25.0 °C | 41.0 - 77.0 °F | |
|
Permabond UV7141 UV-curable Adhesive
Permabond UV7141 is a UV-curable adhesive with a secondary anaerobic cure mechanism. This makes it ideal for bonding materials such as ceramic-coated glass, mirrors, etc. where UV-light cannot penet..
|
|||
| Storage Temperature | 5.00 - 25.0 °C | 41.0 - 77.0 °F | |
|
Victrex® Vicote® F806 Polyetheretherketone (PEEK) Liquid Dispersion
The VICOTE F805 natural, F806 natural and F807Blk grades have been specifically formulated to provide a tough, resilient, high wear resistant coating with varying levels of lubricants on ferrous and..
|
|||
| Storage Temperature | 5.00 - 25.0 °C | 41.0 - 77.0 °F | |
|
Victrex® Vicote® F808 Polyetheretherketone (PEEK) Liquid Dispersion
The VICOTE F808 natural, F809 natural and F810Blk grades have been specifically formulated to provide a resilient coating with high wear and abrasion resistance combined with excellent release prope..
|
|||
| Storage Temperature | 5.00 - 25.0 °C | 41.0 - 77.0 °F | |
|
Permabond HH040 Anaerobic Retainer
Permabond® HH040 is a single component liquid that cures only when in contact with metal parts and oxygen is excluded. The liquid adhesive fills the “air space” between parts and upon cure unitiz..
|
|||
| Storage Temperature | 5.00 - 25.0 °C | 41.0 - 77.0 °F | |
|
Permabond MM115 Anaerobic Threadlocker
Permabond® MM115 Threadlocker is an excellent general purpose threadlocker and sealant. It is used for locking metal bolts, nuts and screws that may require disassembly for service and maintenance...
|
|||
| Storage Temperature | 5.00 - 25.0 °C | 41.0 - 77.0 °F | |
|
Permabond TA4246 Toughened Acrylic Adhesive
PERMABOND® TA4246 is a 2-part, no-mix, room temperature curing structural adhesive. It is ideal for use on a wide variety of substrate materials and forms a very high strength structural bond with ..
|
|||
| Storage Temperature | 5.00 - 25.0 °C | 41.0 - 77.0 °F | |
|
Permabond UV630 UV-curable Adhesive
PERMABOND UV630 is a single part, fast setting, and UV curable adhesive designed specifically for bonding plastics. This material has excellent adhesion to a variety of plastics including polycarbon..
|
|||
| Storage Temperature | 5.00 °C | 41.0 °F | |
|
Henkel Hysol EA 9258.1 Primer
Waterborne, corrosion-inhibiting primer, designed to provide enhanced toughness and high temperature performance where continuous exposures up to 350°F / 177°C are required. Meets SCAQMD Rule ..
|
|||
| Storage Temperature | 5.00 - 30.0 °C | 41.0 - 86.0 °F | |
|
Silikony Polskie Polsil E5S Silicone Emulsion
POLSIL® E – water emulsions of POLSIL® OM methylsilicone fluid. These are milky-white liquids easily mixed with water, smooth to touch, with a specific smell. They are chemically inert. ..
|
|||
| Storage Temperature | 5.00 - 30.0 °C | 41.0 - 86.0 °F | No freezing |
|
3M Dyneon™ PFA 6910GZ Fluoroplastic Dispersion
3M™ Dyneon™ PFA 6910GZ is a 50% solids fluorothermoplastic aqueous dispersion. It is a copolymer of tetrafluoroethylene and perfluorinated comonomers, with a melt viscosity several orders of magni..
|
|||
| Storage Temperature | 5.00 - 25.0 °C | 41.0 - 77.0 °F | |
|
Permabond A025 Anaerobic Retainer
Permabond® A025 is an anaerobic adhesive formulated to provide permanent locking and sealing of metal parts such as bearings, gears, studs and other threaded components. It has been designed for ap..
|
|||
| Storage Temperature | 5.00 - 25.0 °C | 41.0 - 77.0 °F | |
|
Permabond A1044 Anaerobic Threadsealant
Permabond® A1044 is a rapid curing sealant designed to lock and seal metal pipe connections, offering very good resistance to even the most aggressive chemicals. Permabond A1044 can be used to seal..
|
|||
| Storage Temperature | 5.00 - 25.0 °C | 41.0 - 77.0 °F | |
|
Permabond MH052 Anaerobic Threadsealant
Permabond® MH052 is ideal for the sealing of threaded joints. It is approved for use with natural gas and LPG for working pressure up to 20 bar (290 psi) and also for gaseous oxygen up to 10 bar (1..
|
|||
| Storage Temperature | 5.00 - 25.0 °C | 41.0 - 77.0 °F | |
|
Permabond A126 Anaerobic Retainer
Permabond® A126 is a high-strength anaerobic adhesive for permanent assembly of coaxial assemblies or threaded metal components. The exceptionally low viscosity of this product makes it ideal for u..
|
|||
| Storage Temperature | 5.00 - 27.0 °C | 41.0 - 80.6 °F | 3 months |
|
ACC QSil 60 QSI Quantum Silicones 50 Durometer Condensation Cure for Potting
QSil 60 is a red, high temperature, self-leveling, two-component, silicone material primarily used for potting applications. The two applicable catalysts are 0.5% DBT by weight and 10% Deep Section ..
|
|||
| Storage Temperature | 5.00 - 25.0 °C | 41.0 - 77.0 °F | |
|
Victrex® Vicote® F810 Black Polyetheretherketone (PEEK) Liquid Dispersion
Eco-friendly VICOTE Coatings were developed to fill the performance gap found in many existing coating technologies today. Whether applied to industrial, automotive, food processing, semiconductor, ..
|
|||
Copyright © lookpolymers.com All Rights Reserved