Polymer Property : Storage Temperature = 77.0 °F Product List

Physical Properties

Tips: 30 items are displayed at most.

Physical Properties	Metric	English
Storage Temperature	5.00 - 25.0 °C	41.0 - 77.0 °F
Permabond ET505 Epoxy Resin PERMABOND ET505 is a two-part, 1:1 mixable epoxy adhesive. ET505 is a semi-flexible toughened epoxy adhesive with good adhesion to a variety of substrates such as wood, metal, ceramics and some plas..
Storage Temperature	5.00 - 25.0 °C	41.0 - 77.0 °F
Permabond ET536 Epoxy Resin PERMABOND ET536 is a two-part, 1:1 mixable epoxy adhesive with good adhesion to a variety of substrates such as wood, metal, ceramics and some plastics and composites. Permabond ET536 forms tough bo..
Storage Temperature	5.00 - 25.0 °C	41.0 - 77.0 °F
Permabond HH190 Anaerobic Gasketmaker Permabond® HH190 Gasketmaker is an anaerobic curing flange sealant that can replace, or be used as a dressing for, conventional pre-cut gaskets. Since HH190 is a flowable paste, it conforms to the ..
Storage Temperature	5.00 - 25.0 °C	41.0 - 77.0 °F
Permabond HL138 Anaerobic Retaining Compound Permabond® HL138 is a single component liquid that cures only when in contact with metal parts and oxygen is excluded. The liquid adhesive fills the “air space” between parts and upon cure which ..
Storage Temperature	5.00 - 25.0 °C	41.0 - 77.0 °F
Permabond HM128 Anaerobic Threadlocker Permabond® HM128 Threadlocker is a high strength adhesive for permanent assembly. It is typically used for preventing vibration loosening of bolts, studs and cap screws. Full cure to a cross-linked..
Storage Temperature	5.00 - 25.0 °C	41.0 - 77.0 °F
Permabond HM160 Anaerobic Retaining Compound Permabond® HM160 is a medium viscosity liquid adhesive that cures when confined between metal parts to form a tough, hard plastic. In the uncured, liquid state, the adhesive wets the metal surfaces..
Storage Temperature	5.00 - 25.0 °C	41.0 - 77.0 °F
Permabond HM165 Anaerobic Retainer Permabond® HM165 is a high viscosity anaerobic retaining compound that cures when confined between metal parts to form a tough bond. It is best suited for cylindrical parts and where high temperatu..
Storage Temperature	5.00 - 25.0 °C	41.0 - 77.0 °F
Permabond LH056 Anaerobic Threadsealant Permabond LH056 is a thread sealant designed for use in sealing metal pipes and fittings in sprinkler systems which may also contain CPVC piping. Permabond LH056 prevents leaks even on pipes that ar..
Storage Temperature	5.00 - 25.0 °C	41.0 - 77.0 °F
Permabond POP Polyolefin Primer Permabond® Polyolefin Primer has been developed for surface treatment of polyolefins, PTFE and silicones prior to bonding with Permabond® Cyanoacrylate adhesives. Due to their low surface energy, ..
Storage Temperature	5.00 - 25.0 °C	41.0 - 77.0 °F
Permabond TA437 Toughened Acrylic Adhesive PERMABOND TA437 is a single component structural acrylic adhesive designed primarily for bonding metals, ferrites and ceramics. The typical fixture time of TA437 when used with Initiator 41 is 30 –..
Storage Temperature	5.00 - 25.0 °C	41.0 - 77.0 °F
Permabond TA4820 Structural Acrylic Adhesive PERMABOND TA4820 is a 2-part, 1:1 toughened methacrylate adhesive designed for bonding thermoplastics, thermosets, metals and composites. TA4820 has excellent adhesion to as received metal surfac..
Storage Temperature	5.00 - 25.0 °C	41.0 - 77.0 °F
Victrex® Vicote® F804 Black Polyetheretherketone (PEEK) Liquid Dispersion EVICOTE® is the brand name for the Victrex range of coatings. VICOTE Coatings are available through Victrex or its preferred coater network. VICOTE F804Blk has been specifically formulated to provi..
Storage Temperature	5.00 - 25.0 °C	41.0 - 77.0 °F
Victrex® Vicote® F804 Polyetheretherketone (PEEK) Liquid Dispersion VICOTE F804 has been specifically formulated to provide a resilient coating with high wear and abrasion resistance on ferrous substrates such as carbon and cast steels. These properties are retained..
Storage Temperature	5.00 - 25.0 °C	41.0 - 77.0 °F
Victrex® Vicote® F806 Polyetheretherketone (PEEK) Liquid Dispersion The VICOTE F805 natural, F806 natural and F807Blk grades have been specifically formulated to provide a tough, resilient, high wear resistant coating with varying levels of lubricants on ferrous and..
Storage Temperature	5.00 - 25.0 °C	41.0 - 77.0 °F
Victrex® Vicote® F807 Black Polyetheretherketone (PEEK) Liquid Dispersion Eco-friendly VICOTE Coatings were developed to fill the performance gap found in many existing coating technologies today. Whether applied to industrial, automotive, food processing, semiconductor, ..
Storage Temperature	5.00 - 25.0 °C	41.0 - 77.0 °F
Victrex® Vicote® F810 Grey Polyetheretherketone (PEEK) Liquid Dispersion The F810 Grey grades have been specifically formulated to provide a resilient coating with high wear and abrasion resistance combined with excellent release properties on ferrous substrates such as ..
Storage Temperature	5.00 - 25.0 °C	41.0 - 77.0 °F
Victrex® Vicote® F816 Black Polyetheretherketone (PEEK) Liquid Dispersion VICOTE® is the brand name for the Victrex range of coatings. VICOTE Coatings are available through Victrex or its preferred coater network. The VICOTE F815 and F816Blk grades have been specificall..
Storage Temperature	5.00 - 25.0 °C	41.0 - 77.0 °F
Permabond ET538 Epoxy Resin PERMABOND ET538 is a structural, room temperature curing epoxy adhesive that has excellent adhesion to a wide variety of surfaces such as wood, metal, ceramics and many plastic and composite materia..
Storage Temperature	5.00 - 25.0 °C	41.0 - 77.0 °F
Permabond HH040 Anaerobic Retainer Permabond® HH040 is a single component liquid that cures only when in contact with metal parts and oxygen is excluded. The liquid adhesive fills the “air space” between parts and upon cure unitiz..
Storage Temperature	5.00 - 25.0 °C	41.0 - 77.0 °F
Permabond MM115P Pure Anaerobic Threadlocker Permabond® MM115 PURE Threadlocker is an excellent general purpose threadlocker and sealant. It is used for locking metal bolts, nuts and screws that may require disassembly for service and mainten..
Storage Temperature	5.00 - 25.0 °C	41.0 - 77.0 °F
Permabond TA4246 Toughened Acrylic Adhesive PERMABOND® TA4246 is a 2-part, no-mix, room temperature curing structural adhesive. It is ideal for use on a wide variety of substrate materials and forms a very high strength structural bond with ..
Storage Temperature	5.00 - 25.0 °C	41.0 - 77.0 °F
Permabond UV630 UV-curable Adhesive PERMABOND UV630 is a single part, fast setting, and UV curable adhesive designed specifically for bonding plastics. This material has excellent adhesion to a variety of plastics including polycarbon..
Storage Temperature	0.000 - 25.0 °C	32.0 - 77.0 °F
Akzo Nobel Trigonox® C-C75 Polymerization Initiator Initiator for the (co)polymerization of ethylene, styrene, acrylonitrile, acrylates and methacrylates.Chemical Description: tert-Butyl peroxybenzoate, 75% solution in odorless mineral spiritsCAS Num..
Storage Temperature	-20.0 - 25.0 °C	-4.00 - 77.0 °F
Akzo Nobel Trigonox® BPIC-C75 Polymerization Initiator Initiator for the (co)polymerization of ethylene, styrene, acrylonitrile, acrylates and methacrylates. Trigonox BPIC-C75 may also be used as an initiator for curing unsaturated polyester and vinyles..
Storage Temperature	5.00 - 25.0 °C	41.0 - 77.0 °F
Permabond A011 Anaerobic Threadlocker Permabond® A011 is an anaerobic adhesive designed for locking and sealing threaded or coaxially fitting metal parts where subsequent dismantling is required. Its controlled strength ensures fatigue..
Storage Temperature	5.00 - 25.0 °C	41.0 - 77.0 °F
Permabond A1042 Anaerobic Threadlocker Permabond® A1042 is a rapid curing adhesive designed to lock and seal metal parts that subsequently may need to be dismantled for maintenance. The high vibration resistance makes Permabond A1042 pa..
Storage Temperature	5.00 - 25.0 °C	41.0 - 77.0 °F
Permabond ET514 Epoxy Resin PERMABOND ET514 is a 1:1 mixable epoxy adhesive. It has excellent resistance to impact and vibration and is ideal for structural bonding of metal, wood, composites and certain plastics. Its rapid cu..
Storage Temperature	5.00 - 25.0 °C	41.0 - 77.0 °F
Permabond MH052 Anaerobic Threadsealant Permabond® MH052 is ideal for the sealing of threaded joints. It is approved for use with natural gas and LPG for working pressure up to 20 bar (290 psi) and also for gaseous oxygen up to 10 bar (1..
Storage Temperature	5.00 - 25.0 °C	41.0 - 77.0 °F
Permabond A136 Anaerobic Gasketmaker Permabond® A136 is an anaerobic material designed for making 'formed in situ' gaskets between metal surfaces. It is capable of replacing a wide range of conventional gaskets thereby offering potent..
Storage Temperature	5.00 - 25.0 °C	41.0 - 77.0 °F
Victrex® Vicote® F809 Polyetheretherketone (PEEK) Liquid Dispersion The VICOTE F808 natural, F809 natural and F810Blk grades have been specifically formulated to provide a resilient coating with high wear and abrasion resistance combined with excellent release prope..