Polymer Property : Tensile Strength = 6.89 MPa Product List

Mechanical Properties

Tips: 30 items are displayed at most.

Mechanical Properties	Metric	English	Comments
Tensile Strength	6.89 MPa <br>@Strain 100 %	999 psi <br>@Strain 100 %	510 mm/min; ASTM D638
PolyOne Geon™ Vinyl Flexible A75M1 Trans 9000 Polyvinyl Chloride, Flexible (PVC, Flexible) This compound is certified for fuel hose applications(R1 Type B Class 1)under SAE J 1527 requirements.Information provided by PolyOne
Tensile Strength	6.89 MPa	1000 psi	Silicone Property; ASTM D412
Arlon R36798T017 0.017" (0.432 mm) Uncured Silicone Rubber with Laminated Tefzel® Substrate  (discontinue Design/Construction: Liner: PTFE Coated Fiberglass Side 1: Uncured Silicone Rubber Substrate: Laminated Tefzel® Substrate: Treated for adhesionAppearance: Translucent, high viscosity gum on fluoro..
Tensile Strength	>= 6.89 MPa	>= 1000 psi
Garlock 2102 C.I. SBR/NBR Sheet Rubber, Polyester Insert Garlock cloth-inserted materials are designed to add stability where mechanical fastening is necessary, and to reduce gasket creep where heavy flange loading is required.Style #2102 C.I. is a smooth..
Tensile Strength	>= 6.89 MPa	>= 1000 psi
Garlock 2564 C.I. NBR/CR/SBR Sheet Rubber, Polyester Insert Garlock cloth-inserted materials are designed to add stability where mechanical fastening is necessary, and to reduce gasket creep where heavy flange loading is required.Style #2264 is a smooth fini..
Tensile Strength	6.89 MPa	1000 psi	across grain; ASTM F152
Garlock MULTI-SWELLâ„¢ 3760 Compressed Aramid Fiber Gasketing Aramid fibers with a proprietary rubber binder.Creates compressive load in light weight flanges in oil and water serviceTwice as compressible as standard fiber gasketsSeals with low load and irregul..
Tensile Strength	6.89 MPa	999 psi	Measured on films cast from a solution in toluene; ASTM D412
KratonÂ® D1171 P (SIBS) Linear Triblock Copolymer Description: Kraton D1171 P is a clear, linear triblock copolymer based on styrene, butadiene and isoprene with a polystyrene content of 19%. It is supplied from North America in the form: Kraton D1..
Tensile Strength	6.89 MPa	1000 psi	ASTM F152
Garlock 8314 EPDM Sheet Rubber Gasketing Ethylene Propylene Diene Monomer (EPDM)Resists weathering, ozone, and UV exposure.Information provided by Garlock Rubber Technologies
Tensile Strength	6.89 MPa	1000 psi	ASTM F152
Garlock 8316 EPDM Sheet Rubber Gasketing Ethylene propylene diene monomer (EPDM)FDA-approved. Recommended for service against aqueous foods.Information provided by Garlock Rubber Technologies
Tensile Strength	6.89 MPa	1000 psi	ASTM F152
Garlock 9518 Fluoroelastomer Sheet Rubber Gasketing Fluoroelastomer (FKM) Type AExceptional resistance to heat, oils, fuels, numerous acids, and many other chemicals.Information provided by Garlock Rubber Technologies
Tensile Strength	6.89 MPa	1000 psi	ASTM D412
Saint-Gobain TygonÂ® NoropreneÂ® Chemical Tubing Formulation NorpreneÂ® Chemical Tubing is a high performance co-extruded product specifically formulated to provide an ideal combination of chemical resistance and pump life. Its inert ultra-smooth plasticize..
Tensile Strength	6.89 MPa	1000 psi	ASTM D412
Teknor Apex Telcar® OBC 2419C Thermoplastic Elastomer Notes: Telcar OBC has superior mechanical strength and higher elongation which will provide a tougher more durable finished product. Telcar OBC can be used in less demanding sealing applications. T..
Tensile Strength	6.89 MPa	1000 psi	Flatwise, 90 min @ 350°F, Spring Clamp Pressure, Abraded 6061-T6 Untreated; ASTM C297M
Zyvex Performance Materials Aroply™ 350 Nano-Engineered Composite Film Adhesive Aroply™ 350 Film Adhesive is a versatile, heat curing carbon-nanotube modified epoxy structural film adhesive available in a variety of film weights on a supported carrier. Cured adhesive character..
Tensile Strength	>= 6.89 MPa	>= 1000 psi
Arlon 10842N125 Cured/Post-cured, Unsupported Silicone Rubber Low ModulusProduct Color: Natural (Transparent)Interleave: 0.003" PolyethyleneThis data represents typical values for the production material and should not be used as material specifications.Inform..
Tensile Strength	>= 6.89 MPa	>= 1000 psi	Compound Property
Arlon 10842S060 0.060" (1.52 mm) Fully Cured, Unsupported, Silicone Rubber Design/Construction:Side 1: Fully Cured, Unsupported, Silicone Rubber Appearance: Dark red silicone rubberThis data represents typical values for the production material. The data should not be used..
Tensile Strength	>= 6.89 MPa	>= 1000 psi
Arlon 10842S125 Cured/Post-cured, Unsupported Silicone Rubber Low ModulusProduct Color: Saddle BrownInterleave: 0.003" PolyethyleneThis data represents typical values for the production material and should not be used as material specifications.Information pro..
Tensile Strength	6.89 MPa	1000 psi	Silicone Property; ASTM D412
Arlon 28540R015 0.016" (0.406 mm) Uncured Silicone Rubber with Fiberglass Substrate Design/Construction: Interleave: Polyethylene Side 1: Uncured Silicone RubberSubstrate: 1528 Style FiberglassAppearance: Red silicone gum on fiberglass clothThis data represents typical values for t..
Tensile Strength	>= 6.89 MPa	>= 1000 psi	Silicone Property
Arlon 41400R030 0.030" Uncured, Unsupported Silicone Rubber on a Release Carrier Design/Construction:Interleave: 0.003" PolyethyleneSide 1: Uncured, Unsupported Silicone RubberSubstrate: Holland Cloth CarrierThis data represents typical values for the production material and ..
Tensile Strength	6.89 MPa	1000 psi	Silicone Property; ASTM D412
Arlon 48366X007 0.007" (0.178 mm) Uncured/Cured Silicone Rubber with Fiberglass Substrate Design/Construction: Side 1: Cured Silicone RubberSubstrate: Style 1080 FiberglassSide 2: Uncured Silicone RubberInterleave: Polyethylene This data represents typical values for the production mater..
Tensile Strength	>= 6.89 MPa	>= 1000 psi	Compound Property
Arlon 55949C028W 0.029" (0.737 mm) Uncured/Cured Silicone Rubber with Fiberglass Substrate Design/Construction:Side 1: Cured Silicone Rubber LayerSide 2: Uncured Silicone Rubber This data Represents typical values for the production material. The data should not be used to write, or in pl..
Tensile Strength	>= 6.89 MPa	>= 1000 psi	Compound Property
Arlon R35066R020 0.020" (0.508 mm) Uncured/Cured Silicone Rubber with Fiberglass Substrate Design/Construction:Side 1: Cured Silicone RubberSide 2: Uncured Silicone Rubber This data Represents typical values for the production material. The data should not be used to write, or in place of..
Tensile Strength	6.89 MPa	1000 psi	Silicone Property; ASTM D412
Arlon R37208T017 0.017" (0.432 mm) Uncured Silicone Rubber with PTFE Coated Fiberglass Liner Design/Construction: Liner: PTFE Coated Fiberglass Side 1: Uncured Silicone Rubber Substrate: Laminated Tefzel® Substrate: Treated for adhesionThis data represents typical values for the productio..
Tensile Strength	>= 6.89 MPa	>= 1000 psi	Compound Property
Arlon 51946C015A 0.015" (0.381 mm) Uncured/Cured Silicone Rubber with Fiberglass Substrate Design/Construction:Side 1: Cured Silicone RubberSide 2: Uncured Silicone Rubber This data Represents typical values for the production material. The data should not be used to write, or in place of..
Tensile Strength	>= 6.89 MPa	>= 1000 psi	Compound Property
Arlon R33670N004 0.004" (0.102 mm) Uncured Silicone Rubber with K2030 PEN Film Substrate Design/Construction:Side 1: Uncured Silicone Rubber This data Represents typical values for the production material. The data should not be used to write, or in place of, material specifications.Inf..
Tensile Strength	6.89 - 8.27 MPa	1000 - 1200 psi	Compound Property
Arlon R33682C045 0.045" (1.14 mm) Cured Silicone Rubber with Fiberglass Substrate Design/Construction:Side 1: Cured Silicone Rubber This data Represents typical values for the production material. The data should not be used to write, or in place of, material specifications.Infor..
Tensile Strength	>= 6.89 MPa	>= 1000 psi	Compound Property
Arlon R33979C028 0.028" (0.711 mm) Uncured/Cured Silicone Rubber with Fiberglass Substrate Design/Construction:Side 1: Cured Silicone Rubber Layer Side 2: Uncured Silicone Rubber This data Represents typical values for the production material. The data should not be used to write, or in p..
Tensile Strength	>= 6.89 MPa	>= 1000 psi	Compound Property
Arlon R34260N005 0.005" (0.127 mm) Unsupported/Uncured Rubber with Fiberglass Substrate Design/Construction:Side 1: Unsupported/Uncured Rubber Appearance: Clear gum on release linersThis data Represents typical values for the production material. The data should not be used to write, o..
Tensile Strength	6.89 MPa	1000 psi	ASTM D412
Aaron Industries AAROPRENE® ATPR 1000 70A Elastomeric Compound AAROPRENE® ATPR 1000 Series Elastomeric CompoundDurometer values may be specified. Color may be specified.
Tensile Strength	6.89 MPa	1000 psi
Teknor Apex Elexar® EL 3954-80 Thermoplastic Elastomer Notes: Elexar® is a family of styrene block copolymer thermoplastic elastomers, often referred to as thermoplastic rubber (TPR). Elexar® "rubber-like" compounds offer superior electrical properti..
Tensile Strength	>= 6.89 MPa	>= 1000 psi	Silicone Property
Arlon 30850N125 0.125" Uncured, Unsupported Silicone Rubber on a Kodacel Carrier Design/Construction:Side 1: Uncured, Unsupported Silicone RubberSubstrate: Kodacel CarrierInterleave: 0.003" PolyethyleneThis data represents typical values for the production material and should..
Tensile Strength	>= 6.89 MPa	>= 1000 psi	Silicone Property
Arlon 30850S085 0.085" Uncured, Unsupported Silicone Rubber on Release Carrier Design/Construction:Side 1: Uncured, Unsupported Silicone RubberSubstrate: Kodacel CarrierInterleave: 0.003" PolyethyleneThis data represents typical values for the production material and should..