| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Tensile Impact Strength | 378 kJ/m² | 180 ft-lb/in² | Type S; ASTM D1822 |
|
SABIC Innovative Plastics Lexan® HF1110 PC
General purpose grade. Good clarity, heat resistance, property retention and dimensional stability.
|
|||
| Tensile Impact Strength | 378 kJ/m² | 180 ft-lb/in² | Type S; ASTM D1822 |
|
SABIC Innovative Plastics Lexan® HF1140R PC (Asia Pacific)
LEXAN HF1140R is a high flow grade. This material is especially designed for applications that require thin wall sections and high flow lengths. FDA food contact compliant in limited colors. Effe..
|
|||
| Tensile Impact Strength | 378 kJ/m² | 180 ft-lb/in² | Type S; ASTM D1822 |
|
SABIC Innovative Plastics Lexan® HP1R PC (Asia Pacific)
High flow polycarbonate. For medical devices and pharmaceutical applications. Healthcare management of change, biocompatible (ISO10993 or USP Class VI). EtO sterilizable. Contains a higher amount..
|
|||
| Tensile Impact Strength | 378 kJ/m² | 180 ft-lb/in² | Type S; ASTM D1822 |
|
SABIC Innovative Plastics Lexan® HPS1 PC
High flow polycarbonate. For medical devices and pharmaceutical applications. Healthcare management of change, biocompatible (ISO10993 or USP Class VI). EtO, e-beam and gamma sterilizable. Contains..
|
|||
| Tensile Impact Strength | 378 kJ/m² | 180 ft-lb/in² | Type S; ASTM D1822 |
|
SABIC Innovative Plastics Lexan® HPS1R PC
Med/high flow polycarbonate. For medical devices and pharmaceutical applications. Healthcare management of change, biocompatible (ISO10993 or USP Class VI). EtO, e-beam and gamma sterilizable. Cont..
|
|||
| Tensile Impact Strength | 378 kJ/m² | 180 ft-lb/in² | Type S; ASTM D1822 |
|
SABIC Innovative Plastics Lexan® HPS1R PC (Asia Pacific)
High flow polycarbonate. For medical devices and pharmaceutical applications. Healthcare management of change, biocompatible (ISO10993 or USP Class VI). EtO, e-beam and gamma sterilizable. Contains..
|
|||
| Tensile Impact Strength | 378 kJ/m² | 180 ft-lb/in² | Type S; ASTM D1822 |
|
SABIC Innovative Plastics Lexan® HPS1S PC
High flow polycarbonate. For medical devices and pharmaceutical applications. Healthcare management of change, biocompatible (ISO10993 or USP Class VI). EtO, e-beam and gamma sterilizable. Contains..
|
|||
| Tensile Impact Strength | 378 kJ/m² | 180 ft-lb/in² | Type S; ASTM D 1822 |
|
SABIC Innovative Plastics Lexan® LSHF PC
Clear PolyCarbonate, High Flow, UV Stabilization, Heat StabilizationThis data was supplied by SABIC-IP for the Americas region.
|
|||
| Tensile Impact Strength | 378 kJ/m² | 180 ft-lb/in² | Type S; ASTM D1822 |
|
SABIC Innovative Plastics Lexan® LSHF PC (Asia Pacific)
Clear PolyCarbonate, High Flow, UV Stabilization, Heat Stabilization
|
|||
| Tensile Impact Strength | 378 kJ/m² | 180 ft-lb/in² | Type S; ASTM D1822 |
|
SABIC Innovative Plastics Lexan® LSHF PC (Europe-Africa-Middle East)
Clear PolyCarbonate, High Flow, UV Stabilization, Heat Stabilization
|
|||
| Tensile Impact Strength | 378 kJ/m² | 180 ft-lb/in² | Type S; ASTM D1822 |
|
SABIC Innovative Plastics Lexan® HF1110R PC
High flow grade. Easy mold release version of LEXAN HF1110. For thin wall lighting lenses, data storage components and safety eyewear lenses.
|
|||
| Tensile Impact Strength | 378 kJ/m² | 180 ft-lb/in² | Type S; ASTM D1822 |
|
SABIC Innovative Plastics Lexan® HF1110R PC (Asia Pacific)
High flow grade. Easy mold release version of LEXAN HF1110. For thin wall lighting lenses, data storage components and safety eyewear lenses.
|
|||
| Tensile Impact Strength | 378 kJ/m² | 180 ft-lb/in² | Type S; ASTM D1822 |
|
SABIC Innovative Plastics Lexan® HF1130 PC
UV-stabilized. Good clarity, heat resistance, property retention and dimensional stability.
|
|||
| Tensile Impact Strength | 378 kJ/m² | 180 ft-lb/in² | Type S; ASTM D1822 |
|
SABIC Innovative Plastics Lexan® HF1140 PC (Asia Pacific)
Ideal for disposables/short life cycles. Good clarity, heat resistance, property retention and dimensional stability. FDA food contact compliant in limited colors. Effective January 15th, 2007 th..
|
|||
| Tensile Impact Strength | 378 kJ/m² | 180 ft-lb/in² | Type S; ASTM D1822 |
|
SABIC Innovative Plastics Lexan® HF1140 PC (Europe-Africa-Middle East)
Ideal for disposables/short life cycles. Good clarity, heat resistance, property retention and dimensional stability. FDA food contact compliant in limited colors.Effective January 15th, 2007 this..
|
|||
| Tensile Impact Strength | 378 kJ/m² | 180 ft-lb/in² | Type S; ASTM D1822 |
|
SABIC Innovative Plastics Lexan® HP1 PC
High flow polycarbonate. For medical devices and pharmaceutical applications. Healthcare management of change, biocompatible (ISO10993 or USP Class VI). EtO sterilizable. Contains mold release.
|
|||
| Tensile Impact Strength | 378 kJ/m² | 180 ft-lb/in² | Type S; ASTM D1822 |
|
SABIC Innovative Plastics Lexan® HP1R PC
High flow polycarbonate. For medical devices and pharmaceutical applications. Healthcare management of change, biocompatible (ISO10993 or USP Class VI). EtO sterilizable. Contains a higher amount..
|
|||
| Tensile Impact Strength | 378 - 631 kJ/m² | 180 - 300 ft-lb/in² | Average value: 498 kJ/m² Grade Count:16 |
|
Overview of materials for Polycarbonate, Unreinforced, Flame Retardant
This property data is a summary of similar materials in the MatWeb database for the category "Polycarbonate, Unreinforced, Flame Retardant". Each property range of values reported is minimum and max..
|
|||
| Tensile Impact Strength | 378 - 589 kJ/m² | 180 - 280 ft-lb/in² | Average value: 541 kJ/m² Grade Count:6 |
|
Overview of materials for Polycarbonate, Gamma Radiation Resistant
This property data is a summary of similar materials in the MatWeb database for the category "Polycarbonate, Gamma Radiation Resistant". Each property range of values reported is minimum and maximum..
|
|||
| Tensile Impact Strength | 378 kJ/m² | 180 ft-lb/in² | ASTM Data |
|
Styron CALIBREâ„¢ 200 22 Polycarbonate, General Purpose
CALIBRE® 200 series are general purpose, UL listed Polycarbonate resins formulated to comply with the applicable FDA and European regulations governing food contact(1). CALIBRE 200 series resins ..
|
|||
| Tensile Impact Strength | 378 kJ/m² | 180 ft-lb/in² | ASTM D1822, Type S |
|
Styron CALIBREâ„¢ 201-22 Polycarbonate
Information provided by DowThis product line was spun off from Dow Chemical to Styron in 2010.
|
|||
| Tensile Impact Strength | 378 kJ/m² | 180 ft-lb/in² | ASTM D1822 |
|
Styron CALIBREâ„¢ 203-22 Polycarbonate Resin
Overview: CALIBREâ„¢ 200-22 polycarbonate resins are produced in compliance with the US Food and Drug Administration (FDA) and EU food contact regulations. They provide excellent impact resistanc..
|
|||
| Tensile Impact Strength | 378 kJ/m² | 180 ft-lb/in² | ASTM D1822 |
|
Styron CALIBREâ„¢ 2061 HD 15 Polycarbonate Resin
Overview: CALIBREâ„¢ 2061 HD 15 Polycarbonate Resins are designed for steam and ethylene oxide sterilization required by the health care industry. CALIBRE 2061 HD 15 Polycarbonate Resins offer a ..
|
|||
| Tensile Impact Strength | 378 kJ/m² | 180 ft-lb/in² | ASTM D1822 |
|
Styron CALIBREâ„¢ 2091-15 Polycarbonate Resin
Overview: CALIBREâ„¢ MEGARADâ„¢ 2091 Polycarbonate Resins are designed for single use medical devices (SUDs) that require gamma and electron-beam irradiation and an accelerated schedule for de..
|
|||
| Tensile Impact Strength | 378 kJ/m² | 180 ft-lb/in² | ASTM Data |
|
Styron CALIBREâ„¢ 300EP 22 Polycarbonate, General Purpose
CALIBRE® 300EP series resins are general purpose polycarbonate resins and can be supplied with a mold release package, a UV stabilizer package or both. CALIBRE 300EP resins exhibit an excellent p..
|
|||
| Tensile Impact Strength | 378 kJ/m² | 180 ft-lb/in² | ASTM Data |
|
Styron CALIBREâ„¢ MEGARAD 2080 15 Polycarbonate, Gamma Radiation Resistant
CALIBRE® MegaRad 2080 series resins provide end-users of radiation sterilized medical devices a color closer to the water-clear look of the natural resin. When exposed to high energy radiation (g..
|
|||
| Tensile Impact Strength | 378 kJ/m² | 180 ft-lb/in² | ASTM D1822 |
|
Styron CALIBREâ„¢ 200-23 Polycarbonate Resin
Overview: CALIBREâ„¢ 200-23 polycarbonate resins are produced in compliance with the US Food and Drug Administration (FDA) and EU food contact regulations. They provide excellent impact resistanc..
|
|||
| Tensile Impact Strength | 378 kJ/m² | 180 ft-lb/in² | ASTM D1822, Type S |
|
Styron CALIBREâ„¢ 301 EP Polycarbonate
Information provided by DowThis product line was spun off from Dow Chemical to Styron in 2010.
|
|||
| Tensile Impact Strength | 378 kJ/m² | 180 ft-lb/in² | ASTM D1822, Type S |
|
Styron CALIBREâ„¢ 303 EP Polycarbonate
Information provided by DowThis product line was spun off from Dow Chemical to Styron in 2010.
|
|||
| Tensile Impact Strength | 378 kJ/m² | 180 ft-lb/in² | Type S; ASTM D1822 |
|
SABIC Innovative Plastics Lexan® HF1110 PC (Asia Pacific)
General purpose grade. Good clarity, heat resistance, property retention and dimensional stability.
|
|||