| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Flexural Strength | 89.6 MPa | 13000 psi | ASTM D790 |
|
PolyOne Gravi-Tech™ GRV-NY-050-CU-NAT Polyamide 6 (Nylon 6)
Information provided by PolyOne
|
|||
| Flexural Strength | 89.6 MPa | 13000 psi | Test Method I, Procedure B (chs speed 0.05 in/min); ASTM D790 |
|
Network Polymers PC-1029
Description: Natural PolycarbonateInformation provided by Network Polymers Inc.
|
|||
| Flexural Strength | 89.6 MPa | 13000 psi | ASTM D790 |
|
Polymer Resources PPX-GP1 Modified-PPO, General Purpose
Modified-Polyphenylene Oxide, General Purpose, 265F HDTFeatures: • Hydrolytically Stable • Low to No Water AbsorptionProcess: Injection MoldingNotes: All physical, mechanical and thermal testing..
|
|||
| Flexural Strength | 89.6 - 110 MPa | 13000 - 16000 psi | ASTM D790 |
|
Mar-Bal MB2000-10 Thermoset Polyester Composite Molding Compound
An excellent flame and track resistant material with excellent electrical and mechanical properties. Good dielectric strength and low shrink for close dimensional control.Mar-Bal standard grades can..
|
|||
| Flexural Strength | 89.6 MPa | 13000 psi | ASTM D790 |
|
Techmer ES Electrablend® ABS 03008 Stainless Steel Filled
Availability: North AmericaForms: PelletsFiller/Reinforcement: Stainless Steel FiberFeatures: ESD ProtectionInformation provided by TP Composites, Inc.
|
|||
| Flexural Strength | 89.6 MPa | 13000 psi | ASTM D790 |
|
Techmer ES Electrablend® ABS 03009
Availability: North AmericaForms: PelletsFiller/Reinforcement: Unspecified Filler/ReinforFeatures: Conductive, Electromagnetic Shielding (EMI) and Radio Frequency Shielding (RFI)Information provided..
|
|||
| Flexural Strength | 89.6 MPa | 13000 psi | ASTM D790 |
|
Techmer ES Electrablend® ABS CF5 5% Carbon Filled
Availability: North AmericaForms: PelletsFiller/Reinforcement: Carbon Fiber, 5% Filler by WeightAppearance: BlackInformation provided by TP Composites, Inc.
|
|||
| Flexural Strength | 89.6 MPa | 13000 psi | ASTM D790 |
|
Techmer ES HiFill® HIPS GF30 30% Glass Filled
Availability: North AmericaForms: PelletsGlass Fiber Reinforcement, 30% Filler by WeightAppearance: BlackInformation provided by TP Composites, Inc.
|
|||
| Flexural Strength | 89.6 MPa | 13000 psi | ASTM D790 |
|
Techmer ES HiFill® PA6 0137 S2
Availability: North AmericaForms: PelletsFiller/Reinforcement: MetalFeatures: High Specific GravityInformation provided by TP Composites, Inc.
|
|||
| Flexural Strength | 89.6 MPa | 13000 psi | ASTM D790 |
|
Techmer ES Luriblend® PA6 TS15 BK Nylon 6
Availability: North AmericaForms: PelletsAdditive: Heat Stabilizer, Silicone Lubricant and PTFE LubricantFeatures: Heat Stabilized and LubricatedAppearance: BlackInformation provided by TP Composite..
|
|||
| Flexural Strength | 89.6 MPa | 13000 psi | ASTM D790 |
|
Techmer ES Plaslube® J-80/20/TF/15 NAT Acetal (POM) Copolymer |
|||
| Flexural Strength | 89.6 MPa | 13000 psi | ASTM D790 |
|
Styron CALIBREâ„¢ IM 401-18 Polycarbonate
Information provided by DowThis product line was spun off from Dow Chemical to Styron in 2010.
|
|||
| Flexural Strength | 89.6 MPa | 13000 psi | Method I (3 point load), 2.0 mm/min; ASTM D790 |
|
Styron CALIBREâ„¢ IM 401-18 Polycarbonate Resin
Overview: CALIBREâ„¢ IM 401-18 Impact Modified Polycarbonate resin is available in opaque formulations that offer benefits ranging from superior low temperature impact strength to easy process wi..
|
|||
| Flexural Strength | 89.6 MPa | 13000 psi | ASTM D790 |
|
A. Schulman ComAlloy® E-14756 Flame Retardant Easy Flow Polycarbonate Alloy
Information provided by A. Schulman.The ComAlloy product line has been integrated into the A Schulman product line.
|
|||
| Flexural Strength | 89.6 MPa | 13000 psi | ASTM D790 |
|
A. Schulman SCHULADUR® A GB30 30% Glass Bead Reinforced PBT
Information provided by A. Schulman.
|
|||
| Flexural Strength | 89.6 MPa | 13000 psi | ASTM D790 |
|
Lubrizol ISOPLAST™ 202EZ Engineering Thermoplastic Polyurethane Resin
NSF Standard 61 CertifiedAvailable in Americas, Europe, Middle East, Africa, India and AsiaInformation provided by LubrizolLubrizol acquired the Isoplast product line from Dow in 2009.
|
|||
| Flexural Strength | 89.6 MPa | 13000 psi | ASTM D790 |
|
Ensinger Tecatron® XP-74 Compression Molded PPS Compound, with 30% Carbon Fiber and 8% PTFE
Ensinger Special Polymers has over twenty different grades of TECATRON PPS available. Custom formulations can be blended to suit specific applications. Compression molding is amenable to short run p..
|
|||
| Flexural Strength | 89.6 MPa | 13000 psi | ASTM D790 |
|
Entec Hylex® P1310FR Polycarbonate
Information provided by Ravago
|
|||
| Flexural Strength | 89.6 MPa | 13000 psi | ASTM D790 |
|
Asahi Kasei Thermylene® P6-20FG-1740 20% Glass Fiber Reinforced, High Impact
Information provided by Asahi Thermofil
|
|||
| Flexural Strength | 89.6 MPa | 13000 psi | ASTM D-790 |
|
Axiall 9175 White 10 Rigid PVC, Molding, White 10
Information provided by Georgia GulfGeorgia Gulf became Axiall Corporation in 2013.
|
|||