Polymer Property : Charpy Impact, Notched = 0.250 J/cm² Product List

Mechanical Properties

Tips: 30 items are displayed at most.

Mechanical Properties	Metric	English	Comments
Charpy Impact, Notched	0.250 - 0.350 J/cm² <br>@Temperature 23.0 °C	1.19 - 1.67 ft-lb/in² <br>@Temperature 73.4 °F	Injection and Compression; ISO 179/ 1eA
Raschig Group 3535 Epoxy Glass fiber-reinforced epoxy molding compound. Good mechanical strength, very good electrical isolation properties adn dimensional stability even at high temperatures. Form: Low dust granulate pack..
Charpy Impact, Notched	0.250 - 0.450 J/cm²	1.19 - 2.14 ft-lb/in²	Compression; ISO 179/1eA
Raschig Group 6551 DAIP Diallyl Phthalate (DAP), Cast, Mineral Filler Glass-fiber reinforced diallyl isophthalate molding compound. Good mechanical strength together with retention of high electrical isolation properties under hot humid conditions, exceptional dimensi..
Charpy Impact, Notched	0.250 - 0.350 J/cm²	1.19 - 1.67 ft-lb/in²	Compression; ISO 179/1eA
Raschig Group RALUPOL® 4802 UP Polyester Glass-fiber reinforced polyester molding compound. Low mold shrinkage and post-shrinkage, good electrical values, excellent heat resistance, outstanding pourability. This product meets the allowed u..
Charpy Impact, Notched	0.250 - 0.350 J/cm²	1.19 - 1.67 ft-lb/in²	Compression; ISO 179/1eA
Raschig Group RALUPOL® 5000 UP Polyester Glass-fiber reinforced polyester molding compound. Low mold shrinkage and post-shrinkage, very good electrical values, excellent heat resistance, good mechanical strength. This product meets the all..
Charpy Impact, Notched	0.250 - 2.50 J/cm² <br>@Temperature -30.0 - -20.0 °C	1.19 - 11.9 ft-lb/in² <br>@Temperature -22.0 - -4.00 °F	Average value: 0.841 J/cm² Grade Count:49
Overview of materials for Polybutylene Terephthalate (PBT), Unreinforced, Molded This property data is a summary of similar materials in the MatWeb database for the category "Polybutylene Terephthalate (PBT), Unreinforced, Molded". Each property range of values reported is minim..
Charpy Impact, Notched	0.250 - 0.500 J/cm²	1.19 - 2.38 ft-lb/in²	Average value: 0.360 J/cm² Grade Count:6
Overview of materials for Acetal Copolymer, Aramid Fiber Filled This property data is a summary of similar materials in the MatWeb database for the category "Acetal Copolymer, Aramid Fiber Filled". Each property range of values reported is minimum and maximum va..
Charpy Impact, Notched	0.250 - 0.350 J/cm²	1.19 - 1.67 ft-lb/in²	Compression; ISO 179/1eA
Raschig Group RALUPOL® 802 UP Polyester Glass-fiber reinforced polyester molding compound. Low molding shrinkage and post-shrinkage, good electrical values, good mechanical strength, good heat resistance. This product meets the allowed up..
Charpy Impact, Notched	0.250 - 1.24 J/cm² <br>@Temperature -30.0 - -30.0 °C	1.19 - 5.90 ft-lb/in² <br>@Temperature -22.0 - -22.0 °F	Average value: 0.640 J/cm² Grade Count:24
Overview of materials for Nylon 12, Extrusion/Tubing Grade This property data is a summary of similar materials in the MatWeb database for the category "Nylon 12, Extrusion/Tubing Grade". Each property range of values reported is minimum and maximum values ..
Charpy Impact, Notched	0.250 J/cmÂ²	1.19 ft-lb/inÂ²	ISO 179
Manifattura Cattaneo PET+PTFE Polyethylene Terephthalate Manifattura Cattaneo products are available in semi-finished forms such as bars, profiles, sheets and plates.Information provided by Manifattura Cattaneo s.p.a.
Charpy Impact, Notched	0.250 J/cmÂ²	1.19 ft-lb/inÂ²	ISO 179-2:1999
Global EPP PET SL PET + Solid Lubricant PET is an unreinforced, semi-crystalline thermoplastic polyester, demonstrating dimensional stability similar to acetal, combined with the comparable wear resistance of nylon. Heavily loaded mechani..
Charpy Impact, Notched	0.250 J/cmÂ² <br>@Temperature -23.0 Â°C	1.19 ft-lb/inÂ² <br>@Temperature -9.40 Â°F	DIN 53453
Global PP-1100-PK Polypropylene Homopolymer Description-transparency, high stiffness, high heat resistantApplications-general purpose, household goodsInformation provided by Global Polymers Corporation.
Charpy Impact, Notched	0.250 J/cmÂ² <br>@Temperature -23.0 Â°C	1.19 ft-lb/inÂ² <br>@Temperature -9.40 Â°F	DIN 53453
Global PP-1111-R Polypropylene Homopolymer Description-transparency, high stiffness, high heat resistantApplications-electrical/electronic Information provided by Global Polymers Corporation.
Charpy Impact, Notched	0.250 J/cmÂ²	1.19 ft-lb/inÂ²
LATI Latiohm 75/4-10 CNT PBT Semiconductive/dissipative product based on Polybutylene Terephthalate (PBT). Carbon nanotubes. Availability: Africa & Middle East; Asia Pacific; Europe; Latin America; North AmericaInformation pro..
Charpy Impact, Notched	0.250 J/cmÂ²	1.19 ft-lb/inÂ²
LATI Latiohm 82-02 PD09 PA12 Semiconductive/dissipative product based on Polyamide 12 (PA12). Unfilled. Availability: Africa & Middle East; Asia Pacific; Europe; Latin America; North AmericaInformation provided by Lati Industr..
Charpy Impact, Notched	0.250 J/cmÂ² <br>@Temperature 23.0 Â°C	1.19 ft-lb/inÂ² <br>@Temperature 73.4 Â°F	ISO 179/1eA
Styrolution LuranÂ® 388 S SAN Description: Specialty grade with highest mechanical strength and chemical resistance.Information provided by STYROLUTION, which is a joint venture between BASF and INEOS
Charpy Impact, Notched	0.250 J/cm² <br>@Temperature -20.0 °C	1.19 ft-lb/in² <br>@Temperature -4.00 °F	ISO 179/1eA
Borealis Daplen™ MD206U Polypropylene Compound 20% Mineral Filled Daplen MD206U is a 20% mineral filled polypropylene compound intended for injection molding. MD206U has been developed especially for automotive interior parts that require excellent balance betwee..
Charpy Impact, Notched	0.250 J/cm² <br>@Temperature 23.0 °C	1.19 ft-lb/in² <br>@Temperature 73.4 °F	ISO 179
Unipetrol PP MONSTEN® MA 230 Polypropylene Homopolymer Applications include injection molding. Antistatic stabilization. Homopolymer.Information provided by Unipetrol RPA
Charpy Impact, Notched	0.250 J/cm²	1.19 ft-lb/in²	ISO 179/1eA
Borealis Xmod™ HF006SA High Stiffness Polypropylene for Injection Molding Applications Xmod HF006SA is a high melt flow PP homopolymer with increased crystallinity, intended for injection molding. Xmod HF006SA is specifically developed for applications demanding a high surface appear..
Charpy Impact, Notched	0.250 J/cm²	1.19 ft-lb/in²	ISO 179
Vyncolit 4421 XB Novolac Phenolic Mineral and organic filled phenolic molding compound with good mechanical properties.USES: Fuse holders, brush holders, circuit breakers, automotive ignition and solenoid covers.Information provided..
Charpy Impact, Notched	0.250 J/cm²	1.19 ft-lb/in²
Arkema Group Nakan® RMS 501 L PVC, Rigid Injection Molding Grade NAKAN RMS 501 L is a rigid polyvinyl chloride compound developed for injection molding of electrical boxes ( inside ).ISO data provided by the manufacturer, Arkema.
Charpy Impact, Notched	0.250 J/cm² <br>@Temperature -30.0 °C	1.19 ft-lb/in² <br>@Temperature -22.0 °F
BASF Novolen® 2340 P Polypropylene Grade with nucleating agent for injection molded parts.Data was collected by ISO methods and provided by BASF.
Charpy Impact, Notched	0.250 J/cm²	1.19 ft-lb/in²
Arkema Group Appryl® HXN 1240 Polypropylene, 40% Talc Filled Compound of a PP homopolymer and 40% talc, warm stabilized suitable for under hood automotive applications.ISO data provided by the manufacturer, Arkema.
Charpy Impact, Notched	0.250 J/cm²	1.19 ft-lb/in²	Conditioned; ISO 179/IeA
Addiplast Addilene J 490 M40S Flame Retardant Polypropylene, 40% Mineral Filled Flame retardant, mineral filled, with halogensInformation provided by Addiplast.
Charpy Impact, Notched	0.250 J/cm²	1.19 ft-lb/in²	ISO 179-1/1eA
Murtfeldt Murylat® SP Polyethylene Terephthalate Murylat® SP combines the properties of Murylat® with improved wear and friction characteristics. It also has increased dynamic resilience which, for example, significantly reduces the required dri..
Charpy Impact, Notched	0.250 J/cm²	1.19 ft-lb/in²	ISO 179/IeA
Addiplast Addilene H 442 M30 Polypropylene Homopolymer High heat resistance, detergent stabilizedInformation provided by Addiplast.
Charpy Impact, Notched	>= 0.250 J/cm² <br>@Temperature 23.0 °C	>= 1.19 ft-lb/in² <br>@Temperature 73.4 °F	ISO 179
PolyOne Gravi-Tech™ GRV-NY-060-CU Polyamide 6 (Nylon 6) Information provided by PolyOne
Charpy Impact, Notched	0.250 - 0.350 J/cm²	1.19 - 1.67 ft-lb/in²	Compression; ISO 179/1eA
Raschig Group 5567 DAP Diallyl Phthalate (DAP), Cast, Mineral Filler Glass-fiber reinforced diallyl phthalate molding compound free from halogens. Good mechanical strength together with retention of high electrical isolation properties under hot humid conditions, exc..
Charpy Impact, Notched	0.250 J/cm²	1.19 ft-lb/in²
Arkema Group Oroglas® V 045 I Acrylic, Extrusion Grade  (discontinued **) OROGLAS V 045 I is an extrusion that exhibits the following properties : 50% tougher than standard acrylics excellent optical properties ( comparable to that of standard acrylics) superior surface ..
Charpy Impact, Notched	0.250 J/cm² <br>@Temperature 23.0 °C	1.19 ft-lb/in² <br>@Temperature 73.4 °F	ISO 179-1/2 eA
Hexion Bakelite™ PF 4010 Phenolic Formaldehyde Resin, Improved Electrical Properties, Low Shrinkage  (disconti Glass fiber reinforced and inorganically filled molding compound. High heat resistance, reduced molding shrinkage, good chemical resistance and mechanical properties.Application areas: Switch housi..
Charpy Impact, Notched	0.250 - 1.50 J/cm²	1.19 - 7.14 ft-lb/in²	Average value: 0.882 J/cm² Grade Count:11
Overview of materials for Polypropylene with 10% Glass Fiber Filler This property data is a summary of similar materials in the MatWeb database for the category "Polypropylene with 10% Glass Fiber Filler". Specific grades with glass content between 5% and 14% are in..