- HOME
- POLYMER SEARCH
- Polymer Property : Izod Impact, Notched = 0.843 ft-lb/in
Polymer Property : Izod Impact, Notched = 0.843 ft-lb/in Product List
Mechanical PropertiesTips: 30 items are displayed at most.
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Izod Impact, Notched | 0.450 J/cm | 0.843 ft-lb/in | ISO 180/A |
|
Polimeri Europa Eraclene® MR 80 High Density Polyethylene - Injection Molding
Eraclene MR 80 is a high density polyethylene resin (HDPE) with antioxidants, suitable for injection molding application. Eraclene MR 80 shows a good balance between processability and mechanical p..
|
|||
| Izod Impact, Notched | 0.450 J/cm | 0.843 ft-lb/in | ASTM D256 |
|
SABIC Innovative Plastics Lexan® ML7677 PC (Asia Pacific)
Transparent Polycarbonate in limited colors. Excellent processability, super high flow, flame retardant, UL rated V-1 at 2.0mm
|
|||
| Izod Impact, Notched |
0.450
J/cm @Temperature -30.0 °C |
0.843
ft-lb/in @Temperature -22.0 °F |
ASTM D256 |
|
SABIC Innovative Plastics Lexan® ML7686 PC (Asia Pacific)
Transparent Polycarbonate in limited colors. Excellent processability, super high flow. UL rated V-2 at 1.5mm.
|
|||
| Izod Impact, Notched |
0.450
J/cm @Temperature -30.0 °C |
0.843
ft-lb/in @Temperature -22.0 °F |
ASTM D256 |
|
SABIC Innovative Plastics Lexan® EXRL1061 PC (Asia Pacific)
Transparent Polycarbonate in natural color. Excellent processability, super high flow.
|
|||
| Izod Impact, Notched | >= 0.450 J/cm | >= 0.843 ft-lb/in | ASTM D256 |
|
NIZHNEKAMSKNEFTEKHIM PP 4340S (EP2H49G) Propylene and Ethylene Copolymer
Product obtained by copolymerization of propylene with ethylene in presence of complex metalorganic catalysts. It incorporates increased long-term thermal stability, thermal-oxidative degradation r..
|
|||
| Izod Impact, Notched | 0.450 J/cm | 0.843 ft-lb/in | ASTM D256 |
|
LG Chemical LUCEL WK-320 Wear Resistant POM, 20% Mineral Filled, High Modulus
LUCEL semi-crystalline acetal copolymer resins are produced by gas phase polymerization. LUCEL resins can be widely accepted as the replacement of thermosets, aluminum and zinc die-casts or other m..
|
|||
| Izod Impact, Notched | 0.450 J/cm | 0.843 ft-lb/in | ASTM D256 |
|
Loxim 200 00V0 Polybutylene Terephthalate
Information provided by Loxim Industries
|
|||
| Izod Impact, Notched | 0.450 J/cm | 0.843 ft-lb/in | ASTM D256 |
|
Mitsui APELâ„¢ APL8008T Cyclo Olefin Copolymer (COC)
This material possesses many characteristics inherent in polyolefins such as excellent electrical insulating properties and outstanding moisture resistance. In addition, it features good melt proces..
|
|||
| Izod Impact, Notched |
0.450
J/cm @Temperature 0.000 °C |
0.843
ft-lb/in @Temperature 32.0 °F |
ASTM D256 |
|
SABIC Innovative Plastics Valox® 310SE0 PBT (Europe-Africa-Middle East)
VALOX 310SE0 is an unreinforced, flame retardant PBT injection moulding resin. Applications: electrical industry, bobbins, keyboard, switches and switch components and appliance housings.
|
|||
| Izod Impact, Notched |
0.450
J/cm @Temperature 0.000 °C |
0.843
ft-lb/in @Temperature 32.0 °F |
ASTM D256 |
|
SABIC Innovative Plastics Valox® DR48 PBT (Europe-Africa-Middle East)
VALOX DR48 is a 17% glass reinforced, flame retardant injection moulding PBT resin. Applications: lamp sockets, connectors, switches, electrical housings and bases, bobbins, trimmers and electromoto..
|
|||
| Izod Impact, Notched |
0.450
J/cm @Temperature -30.0 °C |
0.843
ft-lb/in @Temperature -22.0 °F |
ASTM D256 |
|
SABIC Innovative Plastics Valox® DR48 PBT (Europe-Africa-Middle East)
VALOX DR48 is a 17% glass reinforced, flame retardant injection moulding PBT resin. Applications: lamp sockets, connectors, switches, electrical housings and bases, bobbins, trimmers and electromoto..
|
|||
| Izod Impact, Notched |
0.450
J/cm @Temperature 23.0 °C |
0.843
ft-lb/in @Temperature 73.4 °F |
ASTM D 256 |
|
SABIC Innovative Plastics LNP Thermocomp OX92080 PPS - LINEAR
LNP* Thermocomp* OX92080 is a compound based on Linear PPS containing Proprietary Fillers.This data was supplied by SABIC-IP for the Americas region.
|
|||
| Izod Impact, Notched | 0.450 J/cm | 0.843 ft-lb/in | ASTM D256 |
|
SABIC Innovative Plastics NORYL GTX GTX985 PPE+PA66
NORYL GTX985 is a 18% mineral filled material. This material combines high stiffness and excellent temperature resistance with conductivity for electrostatic painting.
|
|||
| Izod Impact, Notched | 0.450 J/cm | 0.843 ft-lb/in | ASTM D256 |
|
SABIC Innovative Plastics NORYL NH7111E PPE+HIPS (Asia Pacific)
Noryl* EXNL0280 is a glass fiber reinforced, injection moldable modified polyphenylene ether resin. Designed for good dimensional stability and low warpage, this resin also uses non-halogenated FR a..
|
|||
| Izod Impact, Notched |
0.450
J/cm @Temperature -30.0 °C |
0.843
ft-lb/in @Temperature -22.0 °F |
ASTM D256 |
|
SABIC Innovative Plastics Valox® VX4910 ASA+PBT (Europe-Africa-Middle East)
10% Glass reinforced nucleated PBT/ASA with excellent mechanical properties high dimensional stability, and low density.
|
|||
| Izod Impact, Notched |
0.450
J/cm @Temperature 23.0 °C |
0.843
ft-lb/in @Temperature 73.4 °F |
ASTM D 256 |
|
SABIC Innovative Plastics LNP Thermocomp OFJ66 PPS - Linear (Asia Pacific)
LNP* Thermocomp* OFJ66 is a compound based on PPS - Linear resin containing Glass Fiber, Mineral. Added features of this material include: Low Warpage.This data was supplied by SABIC-IP for the Asi..
|
|||
| Izod Impact, Notched |
0.450
J/cm @Temperature -30.0 °C |
0.843
ft-lb/in @Temperature -22.0 °F |
ASTM D256 |
|
SABIC Innovative Plastics NORYL FE1520PW PPE+PS (Europe-Africa-Middle East)
Noryl* FE1520PW resin is a blend of polyphenylene oxide (PPO) and polystyrene (PS) resin that contains 20% glass reinforcement. The resin is suitable for injection molding. Noryl FE1520PW resin has ..
|
|||
| Izod Impact, Notched | 0.450 J/cm | 0.843 ft-lb/in | |
|
Cosmic Plastics K77 Short Glass Fiber Filled Iso Diallyl Phthalate Molding Compound
Data provided by the manufacturer.
|
|||
| Izod Impact, Notched | 0.450 J/cm | 0.843 ft-lb/in | ASTM D256 |
|
Plenco 6015 Phenolic, Briquette, Injection Molded
PLENCO 06015 is a glass and mineral filled phenolic molding compound offering improved mechanical strength, dimensional stability and excellent electrical properties. 06015 is available in black.Inf..
|
|||
| Izod Impact, Notched |
0.450
J/cm @Temperature 23.0 °C |
0.843
ft-lb/in @Temperature 73.4 °F |
ASTM-D256 |
|
Polyram PlusTek PA124 Nylon 6.6, Injection Molding
A fast cycle polyamide 6.6 for injection molding applicationsInformation provided by Polyram Ram On Ind.
|
|||
| Izod Impact, Notched |
0.450
J/cm @Temperature 23.0 °C |
0.843
ft-lb/in @Temperature 73.4 °F |
ASTM-D256 |
|
Polyram RamOfin PPC342M6 Polypropylene, 30% Mineral Filled
30% mineral filled, heat resistant polypropylene for injection molding applicationsInformation provided by Polyram Ram On Ind.
|
|||
| Izod Impact, Notched | 0.450 J/cm | 0.843 ft-lb/in | ASTM D256 |
|
Braskem Green PE SHD7255LSL Injection Molding High Density Polyethylene
Description: SHC7260LS-L is a high-density polyethylene, developed for the injection molding which presents high hardness and stiffness, besides low tendency to warpage. This resin has additives aga..
|
|||
| Izod Impact, Notched | 0.450 J/cm | 0.843 ft-lb/in | ASTM-D256 |
|
Braskem PRA 0852 RACO Random Polypropylene Copolymer
PRA 0852 is a medium melt flow rate random copolymer with slip and antiblocking agents. It is suitable for blown and cast film extrusion. PRA 0852 has excellent optical properties and good processab..
|
|||
| Izod Impact, Notched |
0.450
J/cm @Thickness 3.17 mm |
0.843
ft-lb/in @Thickness 0.125 in |
ASTM Test |
|
BASF Ultramid® 8272G HS BK-102 12% Glass Filled PA6 (Dry)
Ultramid 8272G HS BK-102 is a 12% glass fiber reinforced, black pigmented, thermally modified, nylon 6 blow molding compound offering an excellent balance of engineering properties combined with the..
|
|||
| Izod Impact, Notched |
0.450
J/cm @Temperature -40.0 °C |
0.843
ft-lb/in @Temperature -40.0 °F |
ASTM Test |
|
BASF Ultramid® B3M6 30% Mineral Filled PA6 (Dry)
Ultramid B3M6 is a 30% mineral reinforced injection molding PA6 grade for industrial items requiring high impact strength and very high dimensional stability, excellent laser markability.
|
|||
| Izod Impact, Notched | 0.450 - 10.7 J/cm | 0.843 - 20.0 ft-lb/in | Average value: 3.69 J/cm Grade Count:4 |
|
Overview of materials for Nylon 6, Film Grade
This property data is a summary of similar materials in the MatWeb database for the category "Nylon 6, Film Grade". Each property range of values reported is minimum and maximum values of appropriat..
|
|||
| Izod Impact, Notched | 0.450 J/cm | 0.843 ft-lb/in | |
|
Cosmic Plastics 6120F Short Glass Fiber Filled Ortho Diallyl Phthalate Molding Compound
Data provided by the manufacturer.
|
|||
| Izod Impact, Notched | 0.450 J/cm | 0.843 ft-lb/in | |
|
Cosmic Plastics D33 Short Glass Fiber Filled Ortho Diallyl Phthalate Molding Compound
Data provided by the manufacturer.
|
|||
| Izod Impact, Notched |
0.450
J/cm @Temperature 23.0 °C |
0.843
ft-lb/in @Temperature 73.4 °F |
ASTM-D256 |
|
Polyram RamSter PF353M6 PBT, 30% Mineral Filled
30% mineral filled for injection molding applicationsInformation provided by Polyram Ram On Ind.
|
|||
Copyright © lookpolymers.com All Rights Reserved