Polymer Property : Tensile Strength at Break = 24.1 MPa Product List

Mechanical Properties

Tips: 30 items are displayed at most.

Mechanical Properties	Metric	English	Comments
Tensile Strength at Break	24.1 MPa	3500 psi	Type IV, 510 mm/min; ASTM D638
PolyOne Geon™ Vinyl Wire & Cable W1349L NAT 0000 Polyvinyl Chloride, Flexible (PVC, Flexible) Typical Properties of Molded Slab (0.075); Not to be Construed as Specifications. Provisional Product Information - Physical and Mechanical properties based on initial production.Information provide..
Tensile Strength at Break	24.1 MPa	3500 psi	Type IV, 510 mm/min; ASTM D638
PolyOne Geon™ Vinyl Wire & Cable W1349L-xx09FRD Polyvinyl Chloride, Flexible (PVC, Flexible) Typical Properties of Molded Slab (0.075); Not to be Construed as Specifications. Provisional Product Information - Physical and Mechanical properties based on initial production.Information provide..
Tensile Strength at Break	24.1 MPa	3500 psi	2 in/min; ASTM D638
RheTech Products M25UVP250-01 25% Mica Reinforced Polypropylene Copolymer, UV Stabilized, Black Applications: BracketsCowl screensRigid exterior componentsInjection molding conditions reported in table.Information provided by RheTech Products.
Tensile Strength at Break	>= 24.1 MPa	>= 3500 psi	ASTM D638
Niche Polymer PPCM6BK Copolymer PP Information provided by Niche Polymer
Tensile Strength at Break	24.1 MPa	3500 psi	ASTM D638
LyondellBasell AlathonÂ® M5370WC High Density Polyethylene ApplicationsALATHON M 5370WC is a natural, high density, polyethylene copolymer resin with a narrow molecular weight distribution formulated for use as primary insulation for coaxial and control cab..
Tensile Strength at Break	24.1 MPa	3500 psi	2 in/min.; ASTM D638
Ineos H12Z-02 Polypropylene Homopolymer, Antistatic and Nucleated A nucleated and antistated polypropylene homopolymer produced by Ineos utilizing unique catalyst technology. It is designed for injection molding applications that require superior mold release pro..
Tensile Strength at Break	24.1 MPa	3500 psi	ASTM D638
Teknor Apex APEXÂ® 3611-95 Polyvinyl Chloride, Flexible Uses: Medical/Healthcare Applications Agency Ratings: NSF 61 Forms: Pellets Additional Information: Second Generation SeriesInformation Provided by Teknor Apex
Tensile Strength at Break	24.1 MPa	3500 psi	ASTM D638
Teknor Apex APEXÂ® 60001 Polyvinyl Chloride, Flexible Notes: 75Â°C Insulation; RoHS Compliant Features: Flame Retardant Uses: Communication Wire InsulationAgency Ratings: NEC Article 725; NEC Article 760; NEC Article 770; NEC Article 800; UL 13; UL 1..
Tensile Strength at Break	24.1 MPa	3500 psi	ASTM D638
A. Schulman POLYTROPE™ TPP 512 Injection Molding Grade Olefinic Thermoplastic Elastomer DescriptionPolytrope TPP 512 is an injection molding grade olefinic thermoplastic elastomer. This product has excellent low temperature impact properties and flow characteristics suitable for moldi..
Tensile Strength at Break	>= 24.1 MPa	>= 3500 psi
Master Bond LED401 White One Part, LED Curable Compound Description: Master Bond LED401 White is a one part LED type system that cures fully upon exposure to a 405 nm wavelength light source where the presence of any UV light is minimal or incidental. In..
Tensile Strength at Break	24.1 MPa	3500 psi	ASTM D638
A. Schulman POLYTROPE™ TPP 512 Injection Molding Grade Olefinic Thermoplastic Elastomer DescriptionPolytrope TPP 512 is an injection molding grade olefinic thermoplastic elastomer. This product has excellent low temperature impact properties and flow characteristics suitable for moldi..
Tensile Strength at Break	24.1 MPa	3500 psi	at max load; ASTM D638
A. Schulman PP 1277A-01 Polypropylene High-Impact Polypropylene DescriptionPolypropylene PP 1277A is a low-flow, high-impact polypropylene for film, profile, tubing and coating.Information provided by A. Schulman.
Tensile Strength at Break	24.1 MPa	3500 psi	ASTM D638
A. Schulman POLYTROPE™ TPP 512 Injection Molding Grade Olefinic Thermoplastic Elastomer DescriptionPolytrope TPP 512 is an injection molding grade olefinic thermoplastic elastomer. This product has excellent low temperature impact properties and flow characteristics suitable for moldi..
Tensile Strength at Break	24.1 MPa	3500 psi	at max load; ASTM D638
A. Schulman PP 1277A-01 Polypropylene High-Impact Polypropylene DescriptionPolypropylene PP 1277A is a low-flow, high-impact polypropylene for film, profile, tubing and coating.Information provided by A. Schulman.
Tensile Strength at Break	24.1 MPa	3500 psi	ASTM D638
Westlake Plastics HIPS High Impact Polystyrene HIPS is a low cost plastic material that is easy to machine and fabricate. It is often specified for low strength structural applications when impact resistance, machinability, and low cost are req..
Tensile Strength at Break	24.1 MPa	3500 psi	ASTM D638
Chesterton ARC 890 Course Grade Sliding Wear Compound An advanced ceramic composite for the repair and protection of all metal surfaces subjected to severe erosion, corrosion, and chemical attack. It is normally applied at the thickness of 6 mm (1/4”)..
Tensile Strength at Break	24.1 MPa	3490 psi	ASTM D3756
3M 301+ Performance Yellow Masking Tape 3M™ Performance Yellow Masking Tape 301+ is an industrial strength yellow colored smooth crepe paper masking tape for paint masking, holding, bundling, and identifying applications.Information prov..
Tensile Strength at Break	24.1 MPa	3500 psi	ASTM D882
3M Scotch-Weld™ DP190 Gray Epoxy Adhesive 3M™ Scotch-Weld™ Epoxy Adhesive DP190 Gray is a 1:1 mix ratio similar to Scotch-Weld™ Epoxy Adhesive 2216 B/A Gray and exhibits good peel, shear and environmental aging properties.Information pro..
Tensile Strength at Break	24.1 MPa	3500 psi	ASTM D3759
3M 4H83C Protective Laser Tape 3M™ Protective Laser Tape 4H83 is a clear or white multi-polymer film coated with medium-tack adhesive designed especially to help provide temporary protection of #3 & #4 stainless steel sheets dur..
Tensile Strength at Break	24.1 MPa	3500 psi	ASTM D3759
3M 4H83W Protective Laser Tape 3M™ Protective Laser Tape 4H83 is a clear or white multi-polymer film coated with medium-tack adhesive designed especially to help provide temporary protection of #3 & #4 stainless steel sheets dur..
Tensile Strength at Break	24.1 MPa	3500 psi	ASTM D638
Albis Plastics Cellulose Acetate CA700 , Unreinforced, 37% Plasticizer  (discontinued **) Amorphous Cellulose Acetate (CA)Characteristics: Chemical Resistance, Toughness, Strength, Hardness, Gloss, Clarity and "Feel"Applications: Tool Handles, Optical Products, Toys and Sheet ProductsPro..
Tensile Strength at Break	24.1 MPa	3500 psi	ASTM D638
Albis Plastics Cellulose Acetate Butyrate B900 (Base Grade), 16% Plasticizer  (discontinued **) Amorphous Cellulose Acetate Butyrate (CAB)Characteristics: Dimensional Stability, Weatherability and Low Temp Impact StrengthApplications: Pens, Ski Goggles, Auto Trim, Skylights, Tool Handles and T..
Tensile Strength at Break	24.1 MPa	3500 psi	ASTM D638
Albis Plastics Cellulose Acetate Butyrate B902 (UV Inhibitor Added), 16% Plasticizer  (discontinued **) Amorphous Cellulose Acetate Butyrate (CAB)Characteristics: Dimensional Stability, Weatherability and Low Temp Impact StrengthApplications: Pens, Ski Goggles, Auto Trim, Skylights, Tool Handles and T..
Tensile Strength at Break	24.1 MPa	3500 psi	TM R050-36
Resinlab® EP1046FG Black Electronic Grade Epoxy Encapsulant Resinlab™ EP1046FG Black is a two part unfilled very fast curing electronic grade epoxy encapsulant designed for small castings (less than 25 grams). It cures very quickly with low exotherm to a to..