Polymer Property : Tensile Strength at Break = 34.0 MPa Product List

Mechanical Properties

Tips: 30 items are displayed at most.

Mechanical Properties	Metric	English	Comments
Tensile Strength at Break	34.0 MPa	4930 psi
Plastcom SLOVALEN PH 91 N PP, basic type FeaturesCompounded homopolymer PP. General use in all industry branches. Packing material, garden flower-pots, toys, furniture industry, guides, dowels, clamps, office chairs, holders etc. Delivered..
Tensile Strength at Break	34.0 MPa	4930 psi	Type I, 5 mm/min; ASTM D 638
SABIC Innovative Plastics Cycolac® MG8000SR ABS (Asia Pacific) This data was supplied by SABIC-IP for the Asia Pacific region.
Tensile Strength at Break	34.0 MPa	4930 psi	50 mm/min; ISO 527
SABIC Innovative Plastics Geloy XTWM200 ASA (Europe-Africa-Middle East) ASA resin for injection molding. Excellent flow, colorability and outdoor weathering capability.This data was supplied by SABIC-IP for the Europe-Africa-Middle East region.
Tensile Strength at Break	34.0 MPa @Temperature 23.0 °C	4930 psi @Temperature 73.4 °F	ISO 527
DuPont Performance Polymers Hytrel® 6646 NC010 TPC-ET  (Unverified Data**) Hytrel® 6646 NC010 is a medium modulus grade with nominal hardness of 66D. It contains non-discoloring stabilizer. It can be processed by many conventional thermoplastic processing techniques like ..
Tensile Strength at Break	34.0 MPa @Temperature 23.0 °C	4930 psi @Temperature 73.4 °F	ISO 527 (1BA bar)
DuPont Performance Polymers Hytrel® HTR8441 BK316 TPC-ET  (Unverified Data**) Hytrel® HTR8441 is a 55 nom. Shore D thermoplastic polyester elastomer for blow molding. It provides good mechanical properties at high temperature.Information provided by DuPont Performance Polyme..
Tensile Strength at Break	<= 34.0 MPa	<= 4930 psi	ISO/R527
Polykemi AB POLYfill PPH T16020 Polypropylene Homopolymer, Mineral Reinforced Information provided by Polykemi AB
Tensile Strength at Break	34.0 MPa	4930 psi	ASTM D638
SABIC Innovative Plastics LNP LUBRICOMP AL004 ABS LNP* Lubricomp* AL004 is a compound based on Acrylonitrile Butadiene Styrene resin containing 20% PTFE. Added features of this material include: Internally Lubricated.
Tensile Strength at Break	34.0 MPa	4930 psi	ISO 527
FKuR Kunststoff FibrolonÂ® F 8530 Biodegradable Wood-Plastic Compound, Fiber Reinforced FIBROLONÂ® are fiber reinforced compounds. Depending on specific customer requirements either a biodegradable polymer or a polyolefin can be used as the polymeric matrix. With the brand name of F..
Tensile Strength at Break	34.0 MPa	4930 psi	50 mm/min; ISO 527-1,-2
Ineos ABS LustranÂ® ABS 450 Injection Molding Grade LustranÂ® ABS 450 has medium impact strength, high flow, and is injection molding grade.
Tensile Strength at Break	34.0 MPa	4930 psi	ISO 37
Huntsman AVALONÂ® 92 AB Thermoplastic Polyurethane Introduction: AVALON 92 AB is a high performance polyester based thermoplastic polyurethane for injection molding. AVALON 92 AB is part of the AVALON Performance Range and offers a premium soling ma..
Tensile Strength at Break	34.0 MPa	4930 psi	5 mm/min; ISO 527
SABIC Innovative Plastics LNP LUBRICOMP DL003EXJ PC LNP* Lubricomp* DL003EXJ is a compound based on Polycarbonate containing 15% PTFE. Characteristics of this grade are Easy Molding, Low Extractable, Internally Lubricated, Healthcare.
Tensile Strength at Break	34.0 MPa	4930 psi	5 mm/min; ISO 527
SABIC Innovative Plastics LNP Lubricomp KZL34 POM LNP* Lubricomp* KZL34 is a compound based on Acetal resin containing Milled Glass and PTFE. Characteristic of this grade is Internally Lubricated.This data was supplied by SABIC-IP for the Americas..
Tensile Strength at Break	34.0 MPa	4930 psi	ISO 527 Type 1A
Solvay TECHNYLÂ® eXten D 458P PA6.10, Conditioned Description: Product in development - provisional datasheet. High viscosity unfilled plasticized PA6.10 for extrusion applications providing low end part warpage.Available in: Asia Pacific, Europe, ..
Tensile Strength at Break	34.0 MPa	4930 psi	Type I, 5 mm/min; ASTM D638
SABIC Innovative Plastics LNP THERMOCOMP AX06437 ABS LNP* THERMOCOMP* AX06437 is a compound based on ABS resin containing Proprietary Filler(s). Added feature of this grade is: Platable.
Tensile Strength at Break	34.0 MPa	4930 psi	Type I, 5 mm/min; ASTM D638
SABIC Innovative Plastics LNP THERMOCOMP KB006 Acetal LNP* THERMOCOMP* KB006 is a compound based on Acetal containing 30% Glass Bead.
Tensile Strength at Break	34.0 MPa	4930 psi	Type I, 5 mm/min; ASTM D638
SABIC Innovative Plastics LNP THERMOCOMP MX06402H PP LNP* THERMOCOMP* MX06402H is a compound based on Polypropylene resin containing 20% Glass Fiber. Added features of this material include: Heat Stabilized, Low Extractable.
Tensile Strength at Break	34.0 MPa	4930 psi	Type I, 50 mm/min; ASTM D638
SABIC Innovative Plastics NORYL PPX PPX7115F PPE+PP High modulus/impact/heat PPE+PP. Compliant with US FDA food contact regulations for temperatures of use of room temperature and below.
Tensile Strength at Break	34.0 MPa	4930 psi	Type I, 5 mm/min; ASTM D638
SABIC Innovative Plastics LNP THERMOCOMP MF002AS PP LNP THERMOCOMP* MF002AS is a compound based on Polypropylene resin containing 10% Glass Fiber. Added features of this material include: Heat Stabilized.
Tensile Strength at Break	34.0 MPa	4930 psi	ISO 527
Total HP 401 MDPE, pipe, cable, sheet FINATHENE® HP 401 is a polyethylene copolymer based on C6 hexene as co-monomer and is produced by a continuous low-pressure slurry polymerization process. FINATHENE® HP 401 is a black high densit..
Tensile Strength at Break	34.0 MPa	4930 psi	ISO 527
Ecomass® 1007ZC85 Stainless Steel Filled COPA Nontoxic alternative to Lead (Pb), weighting, balancing and radiation shielding applicationsStainless Steel Powder Filled Co-Polyamide (COPA)Excellent ToughnessInformation provided by Technical Poly..
Tensile Strength at Break	34.0 MPa	4930 psi	50mm/min; ISO 527-2
Denka TE-20 Transparent Resin Polymer (MABS resin) ABS "TX Polymer" (methyl methacrylate styrene), MS resins as an alternative to acrylic resins, with low density, low moisture absorption, and good moldability, "TH Polymer/TP Polymer," MBS resins with a..
Tensile Strength at Break	34.0 MPa	4930 psi	50mm/min; ISO 527-2
Denka TH-23 Transparent Resin Polymer (MBS resin) Polymethacrylate Butadiene Styrene "TX Polymer" (methyl methacrylate styrene), MS resins as an alternative to acrylic resins, with low density, low moisture absorption, and good moldability, "TH Polymer/TP Polymer," MBS resins with a..
Tensile Strength at Break	34.0 MPa	4930 psi	50 mm/min; ISO 527
Chi Mei Polylac® PA-765 ABS - Flame Retardant F.R. High Flow
Tensile Strength at Break	34.0 MPa	4930 psi
AorTech Biomaterials Elast-Eon™ E2-862 Biomedical Polyurethane Pellets Elast-Eon™ polymers are used in biomedical applications. They have high biostability so they can be used for long term implantation.
Tensile Strength at Break	34.0 MPa	4930 psi	Sintered Sheet; DIN EN ISO 527-3
3M Dyneon™ TFM™ 2001Z PTFE Dyneon™ TFM™ 2001 Z PTFE is an ideal grade for high-performance applications with reduction ratios up to 1000:1. This product has a denser polymer texture providing lower gas permeability than sta..
Tensile Strength at Break	34.0 - 55.0 MPa	4930 - 7980 psi	ASTM D638
Arkema Group KYNAR® 710, 710 HDP Polyvinylidene Fluoride Homopolymer- Injection Molding Characteristics: Natural resin - translucent, off-white hemispheres. HDP indicates higher color stability. High stability in harsh thermal, chemical and ultraviolet environments. High toughness ..
Tensile Strength at Break	34.0 - 55.0 MPa	4930 - 7980 psi	ASTM D638
Arkema Group KYNAR® 760 Polyvinylidene Fluoride Homopolymer - Extrusion Characteristics: Natural resin - translucent, off-white hemispheres. High stability in harsh thermal, chemical and ultraviolet environments. High toughness and mechanical strength, low permeabili..
Tensile Strength at Break	34.0 MPa	4930 psi	ISO 527
Total Lacqtene® 2001 TBK 46 HDPE pipe  (discontinued **) LACQTENE® 2001 TBK 46 is a high density polyethylene produced by the gas phase polymerization process. LACQTENE® 2001 TBK 46 is a black compound especially developed for pressure pipe for gas and ..
Tensile Strength at Break	34.0 - 40.0 MPa @Thickness 2.00 mm, Temperature 23.0 °C	4930 - 5800 psi @Thickness 0.0787 in, Temperature 73.4 °F	Type IV, 50 mm/min; ASTM D638
Solvay Specialty Polymers Solef® 60512 Polyvinylidene Fluoride (PVDF)  (Unverified Data**) Solef® 60512 PVDF copolymer has high viscosity of the melt and it is a grade for offshore piping.Information provided by Solvay Specialty Polymers.
Tensile Strength at Break	34.0 MPa	4930 psi	Type I, 50 mm/min; ASTM D638
SABIC Innovative Plastics GELOY CR7520 ASA (Asia Pacific) ASA copolymer. Automotive grilles and exteriors. Excellent weatherability, good flow/aesthetics and high impact. Rated f2 by UL.