| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Tensile Strength at Break | 62.1 MPa | 9010 psi | Type I, 5.1 mm/min; ASTM D638 |
|
PolyOne Nymax™ GB 1200 20 HS BLACK 18 Polyamide 66 (Nylon 66)
Preliminary Data SheetMolded Test Bars: Dry as MoldedInformation provided by PolyOne
|
|||
| Tensile Strength at Break | 62.1 MPa | 9000 psi | ASTM D638 |
|
Polymer Resources PC/TP-GP3-G10 PC/Polyester Alloy, 10% Glass Reinforced
Superior Chemical Resistance, 10% Glass ReinforcedProcess: Injection MoldingNotes: All physical, mechanical and thermal testing conducted on 1/8-inch thick, un-pigmented, test samples.Information pr..
|
|||
| Tensile Strength at Break | 62.1 MPa | 9000 psi | ASTM D638 |
|
Polymer Resources PPX-SF1 Modified-PPO, Structural Foam Grade, Flame Retardant, Easy Flow
Modified-Polyphenylene Oxide, Structural Foam Grade, Easy FlowFeatures: • Flame Retardant • Bromine Free • Chlorine Free • Self ExtinguishingProcess: Foam MoldingNotes: All physical, mechani..
|
|||
| Tensile Strength at Break | 62.1 MPa | 9000 psi | ASTM D638 |
|
Ravago Manufacturing Americas Enviramid™ N2300HL BK Post Consumer Recycle Nylon 6
Heat Stabilized, Lubricated, Black, and made from EnViramid™ Post Consumer Recycled NylonInformation provided by Ravago.
|
|||
| Tensile Strength at Break | 62.1 MPa | 9000 psi | ASTM D638 |
|
Ravago Manufacturing Americas Hylon® N1040ML Nylon 6/6 (Cond)
Information provided by Ravago.
|
|||
| Tensile Strength at Break | 62.1 MPa | 9000 psi | ASTM D638 |
|
Polymer Resources PC/ABS-FR1-[color]-HH Flame Retardant PC/ABS Alloy, Low Flow
PC/ABS Alloy, Flame Retardant, Low FlowProcess: Injection MoldingNotes: All physical, mechanical and thermal testing conducted on 1/8-inch thick, un-pigmented, test samples.Information provided by P..
|
|||
| Tensile Strength at Break | 62.1 MPa | 9000 psi | ASTM D638 |
|
Polymer Resources PC-GP3-D-[color]-1 Polycarbonate, General Purpose, High Flow with Mold Release
Polycarbonate, General Purpose, High Flow with Mold ReleaseProcess: Injection MoldingNotes: All physical, mechanical and thermal testing conducted on 1/8-inch thick, un-pigmented, test samples.Infor..
|
|||
| Tensile Strength at Break | 62.1 MPa | 9000 psi | ASTM D638 |
|
Techmer ES Plaslube® NY-1/TF/20 BK223 PA66 |
|||
| Tensile Strength at Break |
>=
62.1
MPa @Temperature 23.9 °C |
>=
9000
psi @Temperature 75.0 °F |
|
|
Master Bond EP21ARHT Two component epoxy adhesive, sealant, coating and encapsulating system
Product Description: Master Bond EP21ARHT is a two component epoxy resin system for high performance bonding, sealing, coating and encapsulating. It has a convenient 100 to 50 mix ratio by weight an..
|
|||
| Tensile Strength at Break | >= 62.1 MPa | >= 9000 psi | |
|
Master Bond EP41S-1HT Solvent Resistant Adhesive, Sealant and Coating
Description: Master Bond EP41S-1HT is a two component epoxy resin system for high performance bonding, sealing, coating and encapsulating. It has a 100 to 30 mix ratio by weight and is formulated to..
|
|||
| Tensile Strength at Break | >= 62.1 MPa | >= 9000 psi | |
|
Master Bond EP41S-1HTND Non-Drip, High Performance Epoxy Adhesive
Description: Master Bond EP41S-1HTND is a two component epoxy resin system for high performance bonding, sealing and coating. It has a 100 to 30 mix ratio by weight and its viscosity is a smooth pas..
|
|||
| Tensile Strength at Break | 62.1 MPa | 9000 psi | ASTM D638 |
|
Entec Hylex® P1307L1 HB Polycarbonate
UV Stabilized, Low Flow, Mold Release, Water ClearInformation provided by Entec.
|
|||
| Tensile Strength at Break | 62.1 MPa | 9000 psi | |
|
Abatron AboCast 8103-20 High-Performance Dielectric Epoxy
AboCast 8103-20 is a dielectric in/outdoor epoxy system with superior arc-track resistance, high voltage and heat resistance, low ash and ion content, and it is chlorine-free. This system is unique ..
|
|||