Polymer Property : Tensile Strength, Yield = 26.0 MPa Product List

Mechanical Properties

Tips: 30 items are displayed at most.

Mechanical Properties	Metric	English	Comments
Tensile Strength, Yield	26.0 MPa	3770 psi	50 mm/min; ISO 527
Mytex Polymers AS23K-01 Polypropylene, Talc filled, Compounded, Non-UV stabilized Description: A non-UV stabilized talc filled compounded polypropylene produced for automotive interior applications using Mytex® Technology.Key Applications: General purpose interiorInformation pro..
Tensile Strength, Yield	26.0 MPa	3770 psi	ISO 527
Premix Thermoplastics PRE-ELEC® PE 1297 Conductive Thermoplastic Compound PRE-ELEC® PE 1297 is a conductive thermoplastic compound based on PE-HD. Conductivity is achieved by using special conductive carbon black. In addition to a low electrical resistivity PRE-ELEC® PE..
Tensile Strength, Yield	26.0 MPa	3770 psi	ASTM D638
SABIC M80064 Series High Density Polyethylene for Injection Molding Product Description: M80064 is a high density polyethylene grade with a narrow molecular weight distribution suitable for injection molding applications. It has been designed to provide good rigid..
Tensile Strength, Yield	26.0 MPa	3770 psi	ISO 527-2
Total Lacqrene® 4240(EU) High Impact Polystyrene  (discontinued **) LACQRENE® 4240 is a high heat resistance, high impact polystyrene for the extrusion industry. Good mechanical and thermal properties leads to the production of thermoformed articles of good rigidi..
Tensile Strength, Yield	26.0 MPa	3770 psi	ASTM D638
BP Amoco Acctuf® 3243 Impact Copolymer Polypropylene  (discontinued **) Suggested fabrication methods: Injection moldingFeatures: General purposeComplies with FDA specification, Title 21, CFR 177.1520.Typical property data below from injection molded samples.
Tensile Strength, Yield	26.0 MPa	3770 psi	ASTM D638
LyondellBasell Pro-fax SB786 Polypropylene Impact Copolymer Key Features: blush-resistant, easy molding, high impact polypropylene copolymer resin, good cold impact resistance, good stiffness, FDA acceptableApplications: automotive battery case, housewares, ..
Tensile Strength, Yield	26.0 MPa	3770 psi	ASTM D638
Flint Hills AP5155-HA Polypropylene Impact Copolymer Features: Excellent processability, nucleated and Antistat.Applications: Injection molding: thin wall parts, food containers, packaging and medicalInformation Provided by Flint Hills Resources
Tensile Strength, Yield	26.0 MPa	3770 psi	ASTM D638
Flint Hills AP5520-HA Polypropylene Impact Copolymer Features: Nucleated, good processability, anti-stat and good mold release.Applications: Injection molding: large parts, containers, closuresInformation Provided by Flint Hills Resources
Tensile Strength, Yield	26.0 MPa	3770 psi	ASTM D638
Ineos Styrenics AvantraÂ® 585K Q402 Rubber Modified Polystyrene AvantraÂ® 585K Q402 is a high-impact grade of polystyrene with extremely high surface gloss and excellent practical toughness. Although AvantraÂ® 585K Q402 can be processed by any method applic..
Tensile Strength, Yield	26.0 MPa	3770 psi	50 mm/min; ISO 527-1,-2
Inno-Comp INNOPOLÂ® CS 3-9230 KAR YU UV-Stabilized, 26% Mineral-Filled Compound Blend Of Polypropylene Homopolymer And Block-Copolymer INNOPOLÂ® CS 3-9230 KAR YU is a yellow colored, UV-stabilized, 26% mineral-filled compound based on a blend of polypropylene homopolymer and block-copolymer.INNOPOLÂ® CS 3-9230 KAR YU is develop..
Tensile Strength, Yield	26.0 MPa	3770 psi	ASTM D638
Micropol Isoplas P501 Crosslinkable Polyethylene Information provided by Micropol Limited
Tensile Strength, Yield	26.0 MPa	3770 psi	ISO Method R527
LyondellBasell Astryn BA36GC Polypropylene Copolymer Key Features: conventional melt flow, medium modulus, UV-stabilized polypropylene copolymer, moderate stiffness, good impact resistance, low foggingApplications: seat valances, passenger assist hand..
Tensile Strength, Yield	>= 26.0 MPa	>= 3770 psi
Sibur 21060-PM1 Polypropylene with Low Haze For production of three-layer PE/PP film, for production of sheets for cups and thin casting. It is allowed for contact with food products.
Tensile Strength, Yield	26.0 MPa	3770 psi	2 in/min; ASTM D638
A. Schulman PP 1930L-01 Polypropylene Copolymer Polypropylene DescriptionPolypropylene PP 1930L-01 is an impact grade of polypropylene for use in parts which require good impact and good appearance in light weight injection molded parts. Information provided b..
Tensile Strength, Yield	26.0 MPa	3770 psi	50mm/min; ISO 527-2
Borealis MG9621S Polyethylene MG9621S is a natural high-density polyethylene with a narrow molecular weight distribution, which is produced in a low-pressure gas-phase process. This grade is designed for the injection molding of..
Tensile Strength, Yield	26.0 MPa	3770 psi	ASTM D638
A. Schulman POLYFORT™ FPP 3452 Mineral Filled Copolymer Polypropylene DescriptionPolyfort® FPP 3452 is a 30% mineral filled copolymer polypropylene.Information provided by A. Schulman.
Tensile Strength, Yield	26.0 MPa	3770 psi	ASTM D638
A. Schulman POLYFLAM™ CFP 4611 11% CACO3 filled copolymer polypropylene product DescriptionPolyfort® CFP 4611 is an 11% CACO3 filled copolymer polypropylene product. Information provided by A. Schulman.
Tensile Strength, Yield	26.0 MPa	3770 psi	2 in/min; ASTM D638
A. Schulman POLYPUR™ FPU 1152C Thermoplastic Polyurethane Information provided by A. Schulman.
Tensile Strength, Yield	26.0 MPa	3770 psi	24 min.; ASTM D638
A. Schulman PP 1329 Polypropylene Stabilized Copolymer Polypropylene DescriptionPolypropylene PP 1329 is a stabilized copolymer polypropylene. Information provided by A. Schulman.
Tensile Strength, Yield	26.0 MPa	3770 psi	24 min.; ASTM D638
A. Schulman PP 1329 Polypropylene Stabilized Copolymer Polypropylene DescriptionPolypropylene PP 1329 is a stabilized copolymer polypropylene. Information provided by A. Schulman.
Tensile Strength, Yield	26.0 MPa	3770 psi	ISO 527-2
Total PPM R021 Polypropylene, Random Copolymer for Medical Grade Polypropylene PPM R021 is a random copolymer polypropylene with a Melt Flow Index of 1.8 g/10 min specially developed for the extrusion blow molding of medical containers and medical devices, to the..
Tensile Strength, Yield	26.0 MPa	3770 psi	ASTM D638
A. Schulman POLYFLAM™ CFP 4611 11% CACO3 filled copolymer polypropylene product DescriptionPolyfort® CFP 4611 is an 11% CACO3 filled copolymer polypropylene product. Information provided by A. Schulman.
Tensile Strength, Yield	26.0 MPa	3770 psi	50 mm/min; ASTM D638
A. Schulman PP 1930-01 Polypropylene Copolymer Polypropylene DescriptionPolypropylene PP 1930-01 is an automotive recognized copolymer polypropylene for use on interior trim applications.Information provided by A. Schulman.
Tensile Strength, Yield	26.0 MPa	3770 psi
Total Xsene® XS10 H HDPE, pipe, injection molding FINATHENE® XS 10 H is a high density polyethylene based on C6 hexene as co-monomer and is produced by the Fina Double Loop Technology™. FINATHENE® XS 10 H is a high performance dark blue compound..
Tensile Strength, Yield	26.0 MPa	3770 psi	ASTM D638
Aclo Accutech Polypropylene Homopolymer HP0339C40L1 Calcium Reinforced
Tensile Strength, Yield	26.0 MPa	3770 psi	50 mm/min
Arkema Group Rilsan® AESN P40 TL Nylon 12, Flexible Tubing Grade (Dry) Designation ISO 1874-PA12-P,EHL,22-004Flexible grade for tubes extrusion. Available colors: black and natural. Light and heat stabilized.High impact strength. High burst pressure. Very good chemical..
Tensile Strength, Yield	26.0 MPa	3770 psi	ISO 572-2
Total PPR 3260 Random Copolymer Polypropylene, Extrusion Grade Polypropylene PPR 3260 is a random copolymer polypropylene with a melt flow index of 1.8 g/10 min suitable for extrusion applications.Information provided by Total Petrochemicals.
Tensile Strength, Yield	26.0 MPa	3770 psi	ASTM D638
Ineos Nova 5490 High Impact Polystyrene  (discontinued **) High heat, Good environmental stress crack resistance, Excellent printabilityApplications: Custom sheet, Lithographic applicationsProperties were determined on injection molded specimens at 23°C an..
Tensile Strength, Yield	26.0 MPa	3770 psi	2 in/min; ASTM D638
A. Schulman POLYPUR™ FPU 1152C Thermoplastic Polyurethane Information provided by A. Schulman.