| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Tensile Strength, Yield | 19.3 MPa | 2800 psi | |
|
Resinlab® CYNERGY CA6104 Adhesive
Description: The CYNERGY 6100 SERIES products are used to bond metal to itself or other substrates. It is available in five standard viscosities.Application: The CYNERGY SERIES of the cyanoacrylates..
|
|||
| Tensile Strength, Yield | 19.3 MPa | 2800 psi | |
|
Resinlab® CYNERGY CA6102 Adhesive
Description: The CYNERGY 6100 SERIES products are used to bond metal to itself or other substrates. It is available in five standard viscosities.Application: The CYNERGY SERIES of the cyanoacrylates..
|
|||
| Tensile Strength, Yield | 19.3 MPa | 2800 psi | |
|
Resinlab® CYNERGY CA6208 Adhesive
Description: The CYNERGY 6200 SERIES products are for use in demanding applications where very fast cure speeds are required. Also used when difficult to bond and acidic surfaces are used such as EP..
|
|||
| Tensile Strength, Yield | 19.3 MPa | 2800 psi | 2 in/min; ASTM D638 |
|
Ineos K38-20-160 Polyethylene Copolymer
K38-20-160 is a medium density polyethylene copolymer containing an organic yellow pigment system, designed specifically for the extrusion of natural gas pipe. It exhibits excellent long term stres..
|
|||
| Tensile Strength, Yield | 19.3 MPa | 2800 psi | 2 in/min (50 mm/min); ASTM D638 |
|
Ineos K38-20X2091 HDPE
K38-20X2091 is a yellow medium density polyethylene resin designed specifically for natural gas pipe extrusion. It exhibits excellent long term stress life and slow crack growth resistance. This m..
|
|||
| Tensile Strength, Yield | 19.3 MPa | 2800 psi | ASTM D638 |
|
LyondellBasell Hifaxâ„¢ HSBMR246 Thermoplastic Polyolefin Elastomer
Description: Hifaxâ„¢ HSBMR246 medium high melt flow, 1,500 MPa flexural modulus, paintable, mineral-filled thermoplastic elastomeric olefin (TEO) resin has an outstanding balance of physical pro..
|
|||
| Tensile Strength, Yield | 19.3 MPa | 2800 psi | AVG Stress at Elongation M100; ASTM D412 Method A |
|
Seals Eastern 7130 Fluorocarbon-Elastomer
FKM specially for oil & gas service.Information provided by Seals Eastern, Inc.
|
|||
| Tensile Strength, Yield | 19.3 MPa | 2800 psi | ASTM D638 |
|
Spartech PP7230 Calcium Carbonate Filled High Impact Copolymer
Provides the highest level of impact of all copolymers and are useful in applications where improved processing and stiffness are required versus unfilled copolymer materials.Information provided by..
|
|||
| Tensile Strength, Yield | 19.3 MPa | 2800 psi | ASTM D412 |
|
Teknor Apex APEX® 90-P513A-80-NT Polyvinyl Chloride+PUR
Material Status-Commercial: ActiveAvailability-North AmericaTest Standards Available-ASTM Forms-PelletsInformation provided by Teknor Apex Company
|
|||
| Tensile Strength, Yield | 19.3 MPa | 2800 psi | ASTM D638 |
|
Westlake Plastics Lennite® Ultra High Molecular Weight Polyethylene
Lennite UHMW-PE is a low friction engineering plastic with excellent chemical resistant and abrasive wear resistance. It is widely used in conveyors, packaging machinery, and food processing machin..
|
|||
| Tensile Strength, Yield | 19.3 MPa | 2800 psi | ASTM D638 |
|
A. Schulman SCHULINK® X XL350 Cross-Linkable, High Density Polyethylene
DescriptionSchuLink XL 350 is a cross-linkable, high density polyethylene used from rotational molding. This resin offers high impact strength, good abrasion resistance, good stiffness, and excelle..
|
|||
| Tensile Strength, Yield | 19.3 MPa | 2800 psi | ASTM D638 |
|
Total PSI 844E Polystyrene
Polystyrene 844E is a high impact polystyrene specially designed for the custom sheet market. The polymer produces tough ductile sheet with a rich matte finish. 844E is specially formulated to minim..
|
|||
| Tensile Strength, Yield | 19.3 MPa | 2800 psi | ASTM D638 |
|
Total PSI 935E Polystyrene
Polystyrene 935E is a high impact polystyrene exhibiting exceptional toughness for sheet and thermoforming applications.This polymer is an excellent choice for cups, food packaging, custom sheet and..
|
|||
| Tensile Strength, Yield | 19.3 MPa | 2800 psi | ASTM D638 |
|
A. Schulman SCHULINK® X XL350 Cross-Linkable, High Density Polyethylene
DescriptionSchuLink XL 350 is a cross-linkable, high density polyethylene used from rotational molding. This resin offers high impact strength, good abrasion resistance, good stiffness, and excelle..
|
|||
| Tensile Strength, Yield | 19.3 MPa | 2800 psi | |
|
TSE Industries Millathane® 5004 Millable Polyurethane Elastomer with 8 PHR Di-Cup 40C
MILLATHANE 5004 is a millable polyurethane elastomer having excellent processing characteristics. MILLATHANE 5004 stocks can be readily processed on conventional rubber equipment. Vulcanization is c..
|
|||
| Tensile Strength, Yield | 19.3 MPa | 2800 psi | Type IV; 50 mm per min; ASTM D638 |
|
Chevron Phillips Marlex® HHM TR-418Q MDPE Hexene Copolymer
High performance MDPE resin has been formulated for the demanding requirements of pressure pipe applications. Meets ASTM D4976 PE 225. Meets FDA Regulation 177.1520, suitable for food packaging ap..
|
|||
| Tensile Strength, Yield | 19.3 MPa | 2800 psi | ASTM D-638 |
|
Axiall 11863 Wire & Cable Flexible PVC
Clear, UV resistant speaker wire.Information provided by Georgia GulfGeorgia Gulf became Axiall Corporation in 2013.
|
|||
| Tensile Strength, Yield | 19.3 MPa | 2800 psi | ASTM D-638 |
|
Axiall 14880 Wire & Cable Flexible PVC
14880 is a non-lead stabilized, 80°C rated jacket with UL recognition for 720 hour sunlight resistance in all colors.Information provided by Georgia GulfGeorgia Gulf became Axiall Corporation in 20..
|
|||
| Tensile Strength, Yield | 19.3 MPa | 2800 psi | ASTM D-638 |
|
Axiall 384FR Wire & Cable Flexible PVC
Highly flame retardant jacketing compound recommended for direct burial applications.Information provided by Georgia GulfGeorgia Gulf became Axiall Corporation in 2013.
|
|||
| Tensile Strength, Yield | 19.3 MPa | 2800 psi | ASTM D-638 |
|
Axiall 8903 Moldings & Extrusions Flexible PVC
A high quality, profile extrusion compound with excellent abrasion resistance. Especially formulated for T-moldings, tubings and other shapes where uniform flow throughout the die is required.Infor..
|
|||
| Tensile Strength, Yield | 19.3 MPa | 2800 psi | ASTM D-638 |
|
Axiall 19880 Wire & Cable Flexible PVC
105°C rated, 30 mil and larger, clear compound recommended for VW-1 applications.Information provided by Georgia GulfGeorgia Gulf became Axiall Corporation in 2013.
|
|||
| Tensile Strength, Yield | 19.3 MPa | 2800 psi | ASTM D-638 |
|
Axiall 19890 Wire & Cable Flexible PVC
Highly recommended for 105°C, 15 mil wall insulations and jackets where good gasoline and oil resistance is desired.Information provided by Georgia GulfGeorgia Gulf became Axiall Corporation in 201..
|
|||
| Tensile Strength, Yield | 19.3 MPa | 2800 psi | ASTM D412 |
|
Teknor Apex APEX® 3202-85 Polyvinyl Chloride, Flexible
Material Status-Commercial: ActiveAvailability-North AmericaTest Standards Available-ASTMUses-Caps, Closure, Connectors, Food Service Applications, Safety Equipment, Valves/Valve Parts Appearance-Cl..
|
|||
| Tensile Strength, Yield | 19.3 MPa | 2800 psi | 2" (50mm) per min; ASTM D638 |
|
Formosa Plastics Formolene® 6630A Impact Copolymer Polypropylene
Impact Copolymer for Injection Molding Applications Formolene® 6630A is a high impact copolymer of polypropylene designed and formulated for injection-molded applications. It contains a unique comb..
|
|||
| Tensile Strength, Yield | 19.3 MPa | 2800 psi | 2.0 in/min; ASTM D638 |
|
LTL Color Compounds ColorFast® FRPS100 Styrene, High Impact
V1-rated high impact styreneAll information provided by LTL Color Compounders, Inc.
|
|||
| Tensile Strength, Yield | 19.3 MPa | 2800 psi | ASTM D638 |
|
Techmer ES HiFill® HIPS 0212
Availability: North AmericaForms: PelletsFiller/Reinforcement: Unspecified Filler/ReinforInformation provided by TP Composites, Inc.
|
|||
| Tensile Strength, Yield | 19.3 MPa | 2800 psi | ASTM D638 |
|
Techmer ES HiFill® TPU 0600
Availability: North AmericaForms: PelletsFeatures: High DensityInformation provided by TP Composites, Inc.
|
|||
| Tensile Strength, Yield | 19.3 MPa | 2800 psi | Type IV, 510 mm/min; ASTM D638 |
|
PolyOne Syncure™ System S100NA Polyethylene, Crosslinked (XLPE)
Syncure™ systems are two part moisture crosslinkable compounds, UL bulletinized easy processing, high strength, colorable cable insulation compound suitable for service entrance cables. RoHS compli..
|
|||
| Tensile Strength, Yield | 19.3 MPa | 2800 psi | Type IV, 510 mm/min; ASTM D638 |
|
PolyOne Syncure™ System S112FH Polyethylene, Crosslinked (XLPE)
Syncure™ systems are two part moisture crosslinkable compounds. S112FH is an economical flame resistant building wire insulation. Available in RoHS compliant version.NOTE: The above represents Typi..
|
|||
| Tensile Strength, Yield | 19.3 MPa | 2800 psi | Type IV, 510 mm/min; ASTM D638 |
|
PolyOne Syncure™ System S112NA Polyethylene, Crosslinked (XLPE)
Syncure™ systems are two part moisture crosslinkable compounds. S112NA is a CSA listed, high strength, colorable power cable insulation compound and RoHS compliant.NOTE: The above represents Typica..
|
|||