Polymer Property : Tensile Strength, Yield = 345 MPa Product List

Mechanical Properties

Tips: 30 items are displayed at most.

Mechanical Properties	Metric	English	Comments
Tensile Strength, Yield	345 MPa	50000 psi
Pacific Sintered Materials FN-262-T High Strength Nickel Steel Powdered Metal High strength, good impact resistant material for mechanical components. Excellent hardenability.Equivalent MPIF Specification: FN-0405-45All information provided by Pacific Sintered Metals.
Tensile Strength, Yield	345 MPa	50000 psi
PSM Industries Pacific Sintered Metals High Strength Nickel Steel FN-262-T Powdered Metal High strength, Good impact resistant material for mechanical components, Excellent hardenability Equivalent MPIF Specification: FN-0405-45Information Provided by Pacific Sintered Metals, a division..
Tensile Strength, Yield	345 MPa <br>@Strain 0.200 %	50000 psi <br>@Strain 0.200 %
FloMet Fe-3% Si Soft Magnetic Alloy FloMet provides precision miniature components through metal injection molding (MIM). Metal powders are mixed with thermoplastic binders to form a homogeneous mixture, with approximately 60% volume..
Tensile Strength, Yield	345 MPa	50000 psi
Materion BrushBronzeÂ® 95510 (AMS 4880) Centrifugal Cast 1.0" - 17.0" Information supplied by Brush Wellman Engineered Materials.BrushBronzeâ„¢ 95510 is an Aluminum-Nickel-Bronze alloy that combines high strength, ductility, and good abrasion resistance under sever..
Tensile Strength, Yield	345 - 414 MPa <br>@Strain 0.200 %	50000 - 60000 psi <br>@Strain 0.200 %
Materion BrushCASTÂ® 275C High Strength Casting Alloy (As Cast) Pouring Temperature: 960-1035Â°CHeat treatment required for max strength (Annealing): 760-790Â°C/water quenchHeat treatment required for max strength (Hardening): 760-790Â°C/water quenchDescri..
Tensile Strength, Yield	345 - 448 MPa	50000 - 65000 psi
Meehanite AlmaniteÂ® WS Wear and Abrasion Resisting Cast Iron Type WS is a hard wearing martensitic iron with exceptional impact strength...not readily machinable...work hardens in service to high hardness values. Type WS is recommended for crusher jaws, impa..
Tensile Strength, Yield	345 MPa	50000 psi	Annealed
H.C. Starck MP35NÂ® Nickel/Cobalt/Chromium/Molybdenum Alloy MP35N is a nickel-cobalt based alloy of the MultiphaseÂ® alloy system that has ultra high strength, toughness, ductility, biocompatibility, and outstanding corrosion resistance. H.C. Starck offers..
Tensile Strength, Yield	345 MPa <br>@Strain 0.200 %,<br> Temperature 870 Â°C	50000 psi <br>@Strain 0.200 %,<br> Temperature 1600 Â°F
Haynes 214Â® alloy, hot rolled solution annealed plate 12.7 mm (1/2 in.) thick Intended principally for use at temperatures of 955Â°C and above, exhibits resistance to oxidation that exceeds virtually all conventional heat-resistant wrought alloys. Applications include mesh ..
Tensile Strength, Yield	345 MPa <br>@Strain 0.200 %,<br> Temperature 870 Â°C	50000 psi <br>@Strain 0.200 %,<br> Temperature 1600 Â°F
Haynes 25 alloy, cold worked sheet, 20% cold reduction, aged at 595Â°C (1100Â°F) for 2 hours Excellent high-temperature strength with good resistance to oxidizing environments up to 980Â°C for prolonged exposures and excellent resistance to sulfidation and excellent resistance to metal ga..
Tensile Strength, Yield	345 MPa <br>@Strain 0.200 %,<br> Temperature 260 Â°C	50000 psi <br>@Strain 0.200 %,<br> Temperature 500 Â°F
Haynes HastelloyÂ® G-30Â® alloy, all-weld metal, GMAW weld 1.1 mm diameter filler wire HASTELLOYÂ® G-30Â® alloy is a high chromium nickel-base alloy which shows superior corrosion resistance in commercial phosphoric acids as well as many complex environments containing highly oxid..
Tensile Strength, Yield	345 MPa <br>@Strain 0.200 %	50000 psi <br>@Strain 0.200 %	Typical
TIMET TIMETAL® 50A CP Titanium (ASTM Grade 2) Commercially Pure Titanium.Industry Specifications: USA Aerospace: AMS 4902, 4941. Germany Engineering: 3.7035. Germany Aerospace: 3.7034. France: T-40. UK Aerospace Specifications BS TA. 2, 3,..
Tensile Strength, Yield	>= 345 MPa <br>@Thickness 16.0 - 35.0 mm	>= 50000 psi <br>@Thickness 0.630 - 1.38 in
ThyssenKrupp XABO® 355 T Structural Steel This Material Specification applies to thermomechanically rolled flat products in thicknesses up to 60 mm. The criteria to distinguish the steel grades is the lowest test temperature for the notch-..
Tensile Strength, Yield	>= 345 MPa	>= 50000 psi	0.2% offset
Eagle Brass 19010 XP-150 Copper Nickel Silicon, 3/4 Hard 19010 is an extreme versatile high performance copper nickel silicon alloy. It has an excellent combination of strength, conductivity and formability. Typical uses include terminals, relays, connect..
Tensile Strength, Yield	345 - 427 MPa	50000 - 62000 psi	0.2% offset
Eagle Brass 19210 XP-10 Copper Iron, 3/4 Hard 19210 has higher strengths than most copper alloys but thanks to its composition and processing it retains formability and conductivity that other copper alloys lose. Typical uses include cooling f..
Tensile Strength, Yield	345 MPa <br>@Strain 0.200 %	50000 psi <br>@Strain 0.200 %
Crucible Steel 430F Stainless Steel Crucible 430F is a low carbon, high chromium ferritic stainless steel, specially developed for solenoid core applications in corrosive environments. The chemistry is closely controlled to develop o..
Tensile Strength, Yield	345 MPa <br>@Strain 0.200 %	50000 psi <br>@Strain 0.200 %
Crucible Steel 446 Chromium Steel Crucible 446 is a non-hardenable chromium steel which has the highest corrosion and heat resisting properties of the straight chromium steels. This grade is magnetic at all times. Information provi..
Tensile Strength, Yield	345 MPa	50000 psi
CMW® DSC Copper with Dispersed Aluminum Oxide CMW® DSC material is an extruded and cold worked powder metallurgy material consisting of copper and dispersed aluminum oxide. It has exceptional high temperature strength for its electrical conduc..
Tensile Strength, Yield	345 MPa	50000 psi	Typical
Dura-Bar 65-45-12 Continuously Cast Ductile Iron Bar Stock ASTM A536 Continuously cast ductile iron bar stock is produced in a wide variety of sizes and shapes, including rounds, rectangles and special shape cross sections.It often is used as a direct replacement for..
Tensile Strength, Yield	345 MPa	50000 psi	Annealed
California Fine Wire Dumet Nickel Iron Core Copper Clad Alloy All values may vary dependent on specific design and usage99.9% copper cladding over iron-nickel coreCapabilities: WireRibbonSquareInsulatedPlatedInformation provided by California Fine Wire.
Tensile Strength, Yield	345 MPa <br>@Strain 0.200 %	50000 psi <br>@Strain 0.200 %
Carpenter Chrome Core® 18-FM Solenoid Quality Stainless Steel, Stress Relieved Data provided by Carpenter Technology Corporation.This is a soft ferritic material designed for operation in more corrosive environments than tolerated by 18% Cr-Fe Type 430 stainless. This new mat..
Tensile Strength, Yield	345 MPa	50000 psi	Semi-Processed
AK Steel DI-MAX® M-43 Nonoriented Electrical Steel Nonoriented electrical steels are silicon steels in which magnetic properties are practically the same in any direction of magnetism in the plane of the material. Standard grades from M-15 to M-47 ..
Tensile Strength, Yield	345 MPa	50000 psi	In rolling direction
AK Steel TRAN-COR® H-0 CARLITE® Grain Oriented Electrical Steel TRAN-COR H CARLITE® high permeability electrical steels offer an outstanding degree of grain orientation, This combination of higher permeability with low residual stress offers the potential for l..
Tensile Strength, Yield	345 MPa	50000 psi
Carpenter Kovar® Alloy (Glass and Ceramic Sealing Alloy) Data provided by Carpenter Technology Corporation.Kovar® alloy is a vacuum melted, Fe-Ni-Co, low expansion alloy whose chemical composition is controlled within narrow limits to assure precise unif..
Tensile Strength, Yield	>= 345 MPa	>= 50000 psi
AK Steel ZINCGRIP® FORMABLE 50K / ASTM A1008 class 2 / SAE J1392 050 XLK, Grade 50 Electrogalvanized Carbon Steel, High Strength Low Alloy Steel (HSLAS) Information provided by AK Steel
Tensile Strength, Yield	>= 345 MPa	>= 50000 psi
AK Steel ZINCGRIP® FORMABLE 50K / ASTM A1008 class 1 / SAE J1392 050 XLK, Grade 50 Electrogalvanized Carbon Steel, High Strength Low Alloy Steel (HSLAS) Information provided by AK Steel
Tensile Strength, Yield	345 MPa <br>@Strain 0.200 %	50000 psi <br>@Strain 0.200 %
ATI Allegheny Ludlum AL 444™ Ferritic Stainless Steel Low carbon, low nitrogen ferritic stainless steel alloy. Characteristics:practically immune to chloride stress corrosion cracking, enhanced resistance to pitting and crevicing, good general corrosi..
Tensile Strength, Yield	345 MPa <br>@Strain 0.200 %	50000 psi <br>@Strain 0.200 %
ATI Allvac® Grade 12 UNS R53400 Titanium Alloy Uses: Industrial components. CPI equipment, heat exchangers, pressure vessels, fittings, tubing.Property values are for samples in the metallurgical condition: 1300°F anneal.Information provided by..
Tensile Strength, Yield	345 MPa <br>@Strain 0.200 %	50000 psi <br>@Strain 0.200 %
ATI Allvac® M-252 Nickel Superalloy, Heat Treatment: 1177°C (2150°F) Anneal Applications: Turbine blades, fasteners, and high temperature bolting.Data provided by Allvac.
Tensile Strength, Yield	345 MPa	50000 psi	Beta Quenched
ATI Wah Chang Tiadyne™ 3510 Capable of being surface hardened to depths that produce very high wear resistance. Produced by traditional metallurgical processing, not special treatments.Information provided by ATI Wah Chang
Tensile Strength, Yield	345 MPa <br>@Strain 0.200 %	50000 psi <br>@Strain 0.200 %
ATI Allegheny Ludlum Grade 7 Titanium (UNS R52400) Uses: CPI equipment, industrial components, tubing.Mechanical property data below is typical of annealed samples at room temperature.Information provided by Allegheny Ludlum.