Polymer Property : Tensile Strength, Yield = 38.0 MPa Product List

Mechanical Properties

Tips: 30 items are displayed at most.

Mechanical Properties	Metric	English	Comments
Tensile Strength, Yield	38.0 MPa	5510 psi	Type I, 5 mm/min; ASTM D638
SABIC Innovative Plastics Cycolac® MG29 ABS Super high impact ABS. Good low temperature toughness. High gloss.
Tensile Strength, Yield	38.0 MPa	5510 psi	Type I, 5 mm/min; ASTM D638
SABIC Innovative Plastics Cycolac® MG29 ABS (Asia Pacific) Super high impact ABS. Good low temperature toughness. High gloss.
Tensile Strength, Yield	38.0 MPa	5510 psi	50 mm/min; ASTM D638
Ovation Polymers Nima™ NH PA66UT Nylon 66 Polyamide 66 - Ultra Tough, Flame Retarded Non-Hal grade with excellent retention of mechanical properties. *All properties are measured after 48 hours of conditioning at 23°C and 50% relative humi..
Tensile Strength, Yield	38.0 MPa	5510 psi	Type I, 50 mm/min; ASTM D638
SABIC Innovative Plastics GELOY FXW710SK ASA General purpose injection molding ASA with Visual Fx sparkle effect.
Tensile Strength, Yield	38.0 MPa	5510 psi	50 mm/min; ISO 527
SABIC Innovative Plastics GELOY FXW710SK ASA General purpose injection molding ASA with Visual Fx sparkle effect.
Tensile Strength, Yield	38.0 MPa	5510 psi	Type I, 50 mm/min; ASTM D 638
SABIC Innovative Plastics Geloy XTWE265 ASA Highly weatherable Geloy ASA profile extrusion grade for processes with simple or no calibration hardware.This data was supplied by SABIC-IP for the Americas region.
Tensile Strength, Yield	38.0 MPa	5510 psi	ASTM D638
Ineos Nova 2504 General Purpose Crystal Polystyrene  (discontinued **) Good blending resin, Good balance of flow, strength and heat resistance, USP Class VI Applications: Consumer electronics, HousewaresExposure to gamma radiation in the 2.02-6.06 megarad range has no ..
Tensile Strength, Yield	38.0 MPa	5510 psi	50 mm/min
Eastman Tenite 371A-08 Cellulose Acetate Propionate  (discontinued **) 8% Plasticized. ISO data as provided by the manufacturer, Eastman Chemical.
Tensile Strength, Yield	38.0 MPa	5510 psi	ISO R527
Fainplast Compounds RE 612 Rigid PVC, Extrusion Spiral pipes
Tensile Strength, Yield	38.0 MPa	5510 psi	ISO R527
Fainplast Compounds RK 330 Rigid PVC, Extrusion Lead Free Profiles
Tensile Strength, Yield	38.0 MPa	5510 psi	ASTM D638
Ineos Nova 3100 General Purpose Crystal Polystyrene Good balance of flow and set-up properties, Good crack resistanceApplications: Single service cutlery, Single service drinkware, Consumer electronic packagingExposure to gamma radiation in the 2.02-..
Tensile Strength, Yield	38.0 MPa	5510 psi	ASTM D638
Ineos Nova 3101 General Purpose Crystal Polystyrene Good balance of flow and set-up properties, Good crack resistanceApplications: Single service cutlery, Single service drinkware, Consumer electronic packagingExposure to gamma radiation in the 2.02-..
Tensile Strength, Yield	38.0 MPa @Temperature 23.0 Â°C	5510 psi @Temperature 73.4 Â°F	ASTM D638
Ineos H02C-00 Polypropylene Homopolymer This is a low flow rate, high clarity homopolymer designed for extrusion, thermoforming, blow molding, and rigid packaging. Applications that require good see-through clarity combined with good hea..
Tensile Strength, Yield	38.0 MPa	5510 psi	ASTM D638-02
Ipiranga Petrochem PH 0133 Polypropylene The production of polypropylene (PP) employs Spheripol technology from Montell / Italy. This technology has been acclaimed all over the world and is known as clean technology, because it does not pr..
Tensile Strength, Yield	38.0 MPa	5510 psi	ASTM D638-02
Ipiranga Petrochem PH 3515 Polypropylene The production of polypropylene (PP) employs Spheripol technology from Montell / Italy. This technology has been acclaimed all over the world and is known as clean technology, because it does not pr..
Tensile Strength, Yield	38.0 MPa	5510 psi	Type I, 5 mm/min; ASTM D638
SABIC Innovative Plastics LNP STAT-LOY A3000TXB ABS LNP* STAT-LOY* A3000TXB is a compound based on ABS resin. Added features of this material include: Antistatic, Transparent, Formulated with FDA Food Contact Additives and Bioassessed to ISO 10993...
Tensile Strength, Yield	38.0 MPa	5510 psi	ISO 527
Styrolution TerluranÂ® HD-15 ABS Information provided by STYROLUTION, which is a joint venture between BASF and INEOS
Tensile Strength, Yield	38.0 MPa	5510 psi	ASTM D638
UBE UBESTA® 3020X25L Rigid Automotive Grade Nylon 12 Description: UBE UBESTA® Automotive grade Nylon 12Comments: for coating steel and aluminumInformation provided by UBE.
Tensile Strength, Yield	38.0 MPa	5510 psi	parallel; ISO 527-3
Covestro Desmopan® 445 Polyurethane injection molding gradegrease and oil-resistantgood heat resistancelow compression setApplicationAutomotive engineeringInjection molded engineering partsPreprocessingMax. Water content
Tensile Strength, Yield	38.0 MPa @Strain 300 %	5510 psi @Strain 300 %	ISO 527-1/-2
Covestro Desmopan® DP 8715 Polyurethane + ABS injection molding grademodified with ABSgood low-temperature flexibilitygood wear resistanceApplicationSki boot shellsAs of 1 September 2015, Bayer MaterialScience was separated from Bayer AG and of..
Tensile Strength, Yield	38.0 MPa	5510 psi	ISO 527-2/50
ExxonMobil Exxtral™ LNU 011 Performance Polyolefin Product Description: A specialty thermoplastic polyolefin resin with high stiffness, high gloss, low discoloration and good detergent resistance for large electrical appliances such as washing machi..
Tensile Strength, Yield	38.0 MPa	5510 psi	50 mm/min
Arkema Group Rilsan® AMV TL Nylon 12, Rigid, Injection Grade (Conditioned) Designation ISO 1874-PA12,MHLR,16-010Rigid grade for injection molding. Available color: natural. Light and heat stabilized. Mold-release agent.High impact strength. Easy filling of the mold due to ..
Tensile Strength, Yield	38.0 MPa	5510 psi	ASTM D638
3D Systems Accura® 25 Plastic for SLA® Systems For use with solid-state stereolithography (SLA®) systems.ApplicationsFunctional components for assemblies and mock-ups for:Automotive styling parts — trim, fascia, and other componentsConsumer el..
Tensile Strength, Yield	38.0 MPa	5510 psi	ASTM D638
Ineos Nova 2500 General Purpose Crystal Polystyrene  (discontinued **) Good blending resin, Good balance of flow, strength and heat resistance, USP Class VIApplications: Consumer electronics, Housewares, Co-extrusion cap coat, Impact resin cuttingExposure to gamma radi..
Tensile Strength, Yield	38.0 MPa	5510 psi	Conditioned 15 days at 23°C - 50% RH; ISO 527
Arkema Group Rilsamid® PA 12 AMNO MED Nylon 12 Rilsamid® AMNO MED is a thermoplastic polyamide 12. This grade dedicated to injection offers the highest quality and it is specifically designed to meet the stringent requirements of the medical ap..
Tensile Strength, Yield	38.0 MPa	5510 psi	ISO R527
Fainplast Compounds RE 430 Rigid PVC, Extrusion Electric channels
Tensile Strength, Yield	38.0 MPa	5510 psi	50 mm/min
Polimeri Europa SINKRAL C443 ABS, Heat Stabilized  (discontinued **) Symbol according to ISO 1043-1: ABS Grade designation according to ISO 2580-ABS 1,MG,105-08-25-20 Medium heat injection moulding grade. The availability of different industrial processes to manufa..