Polymer Property : Tensile Strength, Yield = 6240 psi Product List

Mechanical Properties

Tips: 30 items are displayed at most.

Mechanical Properties	Metric	English	Comments
Tensile Strength, Yield	43.0 MPa	6240 psi	Type I, 5 mm/min; ASTM D638
SABIC Innovative Plastics Cycolac® MG38F ABS (Asia Pacific) Very high impact ABS. Toughness/rigidity. FDA compliant.
Tensile Strength, Yield	43.0 MPa	6240 psi	Type I, 5 mm/min; ASTM D638
SABIC Innovative Plastics Cycolac® MG38U ABS High impact ABS. UL 746C f1 listed. Toughness/rigidity. Good fatigue resistance.
Tensile Strength, Yield	43.0 MPa	6240 psi	50 mm/min; ISO 527
SABIC Innovative Plastics GELOY CR8510 ASA (Asia Pacific) ASA with outstanding UV exposure performance for both exterior and interior applications. F1 Rated.
Tensile Strength, Yield	43.0 MPa	6240 psi	Type I, 5 mm/min; ASTM D 638
SABIC Innovative Plastics Geloy XTWM206 ASA (Asia Pacific) Next generation ASA optimized for outstanding weatherability, colorability and higher heat applications requiring UV exposure resistance.This data was supplied by SABIC-IP for the Asia Pacific regio..
Tensile Strength, Yield	43.0 MPa	6240 psi
Reliance Industries Polypropylene - 30% glass fiber filled Information provided by Reliance Industries
Tensile Strength, Yield	43.0 MPa	6240 psi	ASTM D638
Ineos ABS Lustran® Ultra 2337 General Purpose, Superhigh-Gloss  (discontinued **) Information provided by Bayer Corporation, Plastics DivisionLANXESS was spun-off from Bayer in early 2005. Business renamed Ineos ABS after INEOS acquires a majority shareholding under a JV with La..
Tensile Strength, Yield	43.0 MPa	6240 psi	50 mm/min
Polimeri Europa SINKRAL A22V ABS  (discontinued **) Symbol according to ISO 1043-1: ABS Grade designation according to ISO 2580-ABS 1,MG,095-25-09-25 Very high flow grade for fast cycle injection moulding. Particularly recommended for the domestic ..
Tensile Strength, Yield	43.0 MPa	6240 psi	ISO R527
Fainplast Compounds RST 0413 Rigid PVC, Extrusion Lead Free Transparent antishock profiles
Tensile Strength, Yield	43.0 MPa	6240 psi	ISO 527
GEHR Plastics POM-10PE Acetal Copolymer Polyoxymethylene can be used in temperatures up to 100Â°C. The high surface strength is only surpassed by a few materials. POM shows good sliding properties and high resistance to wear and tear be..
Tensile Strength, Yield	43.0 MPa	6240 psi	Type I, 5 mm/min; ASTM D638
SABIC Innovative Plastics LNP LUBRICOMP DL004 PC LNP* Lubricomp* DL004 is a compound based on Polycarbonate resin containing 20% PTFE. Added features of this material include: Internally Lubricated.
Tensile Strength, Yield	43.0 MPa	6240 psi	SABIC - Japan Method
SABIC Innovative Plastics NORYL SE100P PPE+HIPS (Asia Pacific)
Tensile Strength, Yield	43.0 MPa	6240 psi	Type I, 50 mm/min; ASTM D638
SABIC Innovative Plastics NORYL WCV072 PPE+PP (Asia Pacific) Flexible, halogen free mPPE extrusion grade material for applications such as automotive wire insulation. Low specific gravity with good flame retardant and very good scrape abrasion resistance. De..
Tensile Strength, Yield	43.0 MPa	6240 psi	5 mm/min; ISO 527
SABIC Innovative Plastics LNP LUBRICOMP SG004 PA12 (Europe-Africa-Middle East) LNP* LUBRICOMP* SG004 is a compound based on PA 12 resin containing Graphite. Added features include: Internally Lubricated.
Tensile Strength, Yield	43.0 MPa	6240 psi	5 mm/min; ISO 527
SABIC Innovative Plastics LNP Lubricomp WL0049XF PBT LNP* Lubricomp* WL0049 is a compound based on Polybutylene Terephalate resin containing PTFE and Flame Retardant. Added features include: Internally Lubricated, Flame Retardant.This data was suppl..
Tensile Strength, Yield	43.0 MPa	6240 psi	ISO 527
SABIC Innovative Plastics LNP STAT-LOY AF306 ABS LNP* STAT-LOY* AF306 is a compound based on ABS resin containing 30% Glass Fiber. Added feature of this material is: Antistatic.
Tensile Strength, Yield	43.0 MPa	6240 psi	50mm/min; ISO 527
Styrolution TerblendÂ® N NM-19 ABS/PA6 (Dry) Terblend N NM-19 is a UV stabilized ABS/PA6 blend combining very high impact strength, even at low temperatures with an excellent processability and surface appearance.Information provided by STYROL..
Tensile Strength, Yield	43.0 MPa	6240 psi	ISO 527-1/-2
Styrolution TerblendÂ® N NM-19 XP Beige 38163 ABS+PA (Dry) Description: TerblendÂ® N NM-19 XP is an UV stabilized ABS/PA blend combining very high impact strength, even at low temperatures with an outstanding processability and excellent surface appearanc..
Tensile Strength, Yield	43.0 MPa	6240 psi	Type I, 50 mm/min; ASTM D638
SABIC Innovative Plastics NORYL EM6100 PPE+PS PPE+PS blend. Unfilled. Good balance of flow/heat/impact. Dimensional stability. Paint adhesion. Suitable for the automotive interior market: HVAC housings, radio components. MS-DB424, WSB-M4D844-A9..
Tensile Strength, Yield	43.0 MPa	6240 psi	ASTM D638
UBE UBESTA® 3024NUX Short Cycle Time Electronic Grade Nylon 12 Description: UBESTA Nylon 12 has an excellent termite resistance than other plastics. UBESTA contributes as a material for jacket and sheath which lay for telephone and telegram Communication System..
Tensile Strength, Yield	43.0 MPa	6240 psi	ASTM D638
Eastman Tritan MX731 Copolyester Eastman Tritan Copolyester MX731 is an amorphous product with excellent appearance and clarity. Eastman Tritan Copolyester MX731 is a high flow medical grade of Eastman Tritan that has viscosity re..
Tensile Strength, Yield	43.0 MPa	6240 psi	ASTM D638
Eastman Tritan TX1001 Copolyester Eastman Tritan TX1001 is an amorphous copolyester with excellent appearance and clarity. Eastman Tritan TX1001 contains a mold release derived from vegetable based sources. Its most outstanding fe..
Tensile Strength, Yield	43.0 MPa	6240 psi	ASTM D638
Eastman Tritan TX1500HF Copolyester Eastman Tritan TX1500HF is a high flow grade of Eastman Tritan. Eastman Tritan TX1500HF has viscosity reductions of 40-50% relative to Eastman Tritan copolyester TX1000. Other outstanding features..
Tensile Strength, Yield	43.0 MPa	6240 psi	ISO 527-1/-2
DuPont Performance Polymers Delrin® 100STE NC010 Acetal (POM)  (Unverified Data**) Super Toughened High Viscosity Acetal Homopolymer with Very Low Emissions Delrin 100STE NC010 (formerly DE20590) is a high-viscosity super-toughened acetal homopolymer with very low VOC emissions. P..
Tensile Strength, Yield	43.0 MPa	6240 psi
Fainplast Compounds R 220 Rigid PVC, Extrusion Rolling shutters
Tensile Strength, Yield	43.0 MPa	6240 psi
Fainplast Compounds R 220/R Rigid PVC, Extrusion Shiny rolling shutters
Tensile Strength, Yield	43.0 MPa	6240 psi	50mm/min; ISO 527
BASF Ultramid® 8202C HS PA6 (Conditioned) Ultramid 8202C HS is a heat stabilized, low viscosity, PA6 injection molding homopolymer possessing a modified crystalline structure for increased property performance and faster cycles. It is also..
Tensile Strength, Yield	43.0 MPa	6240 psi	2 in/min; ASTM Test
BASF Ultramid® 8202CQ PA6 (Conditioned) Ultramid 8202CQ is a low viscosity, PA6 injection molding homopolymer, possessing a modified crystalline structure or increased property performance and faster cycles. It is also available in pigme..
Tensile Strength, Yield	43.0 MPa	6240 psi	ISO 527-2
Tisan TISOPLEN® 25% Glass Fiber Reinforced Flame Retardant (V0). Heat Stabilized Copolymer Polypropylene TISOPLEN has a wide area of application in furniture, durable goods, household appliances, electrics/electronics, and telecommunication industries. General specifications include Low densityLow mois..
Tensile Strength, Yield	43.0 MPa	6240 psi	ASTM D638
Ineos Nova 3511 General Purpose Crystal Polystyrene  (discontinued **) Excellent blending resin, Suitable fore difficult to fill and thin wall molding, USP Class VIApplications: Single service cutlery, Cosmetic and medical molding, Consumer electronic packagingExposure..
Tensile Strength, Yield	43.0 MPa	6240 psi	5 mm/min; ISO 527
SABIC Innovative Plastics GELOY CR7500 ASA High heat ASA with optimum flow-impact balance. For Automotive applications and Automotive colors only.