Polymer Property : Tensile Strength, Yield = 6820 psi Product List

Mechanical Properties

Tips: 30 items are displayed at most. For the rest of the results, please contact customer service.

Mechanical Properties	Metric	English	Comments
Tensile Strength, Yield	47.0 MPa	6820 psi	50 mm/min; ISO 527
SABIC Innovative Plastics Cycolac® MG38 ABS (Europe-Africa-Middle East) Very high impact ABS. Toughness/rigidity. Good fatigue resistance.
Tensile Strength, Yield	47.0 MPa	6820 psi	50 mm/min; ISO 527
SABIC Innovative Plastics Geloy XTWM200 ASA ASA resin for injection molding. Excellent flow, colorability and outdoor weathering capability.This data was supplied by SABIC-IP for the Americas region.
Tensile Strength, Yield	47.0 MPa	6820 psi	50 mm/min; ISO 527
SABIC Innovative Plastics Geloy XTWM200 ASA (Europe-Africa-Middle East) ASA resin for injection molding. Excellent flow, colorability and outdoor weathering capability.This data was supplied by SABIC-IP for the Europe-Africa-Middle East region.
Tensile Strength, Yield	47.0 MPa	6820 psi	Type I, 5.1 mm/min; ASTM D638
PolyOne Geon™ Vinyl Dry Blend E7009 Polyvinyl Chloride, Rigid (PVC, Rigid) Recommended for whites and light pastel colors only. Not to be used for darker colors.Physical properties based on Geon E7009 white 1024 lot# UTCX 57572Information provided by PolyOne
Tensile Strength, Yield	47.0 MPa	6820 psi	ASTM D638
Ineos Nova 1531 High Heat Crystal Polystyrene (discontinued **) High flow and high heat resistance, Excellent clarityApplications: Injection moldingExposure to gamma radiation in the 2.02-6.06 megarad range has no significant effect on the physical and optical p..
Tensile Strength, Yield	47.0 MPa	6820 psi	50 mm/min; ISO 527-1,-2
Ineos ABS LustranÂ® Ultra 4115 ABS Pellets (a-methylstyrene-SAN / PC-modified), Very High Heat Grade LustranÂ® Ultra 4115 is very high heat grade with high impact resistance and is PC-modified. It is used for the production of molded plastic articles.
Tensile Strength, Yield	47.0 MPa	6820 psi	ISO 527
SABIC Innovative Plastics LNP LUBRICOMP KL004 Acetal Copolymer LNP LUBRICOMP* KL004 is a compound based on Acetal Copolymer resin containing 20% PTFE. Added feature of this material is: Wear Resistant.
Tensile Strength, Yield	47.0 MPa	6820 psi	ISO 527
SABIC Innovative Plastics LNP LUBRICOMP KL004 Acetal Copolymer (Asia Pacific) LNP Lubricomp* KL004 is a compound based on Acetal Copolymer resin containing PTFE. Added features of this material include: Internally Lubricated. This grade was previously found under the LNP* Fu..
Tensile Strength, Yield	47.0 MPa	6820 psi	ISO 527
SABIC Innovative Plastics LNP LUBRICOMP KP004L Acetal Copoly LNP* LUBRICOMP* KP004L is a compound based on Acetal Copolymer resin containing 20% PTFE/Silicone. Added features of this material include: Wear Resistant, Low Extractible.
Tensile Strength, Yield	47.0 MPa	6820 psi	Type I, 50 mm/min; ASTM D638
SABIC Innovative Plastics XYLEX HX8300HP PC+POLYESTER Medium flow, Transparent PC/Polyester alloy. For medical devices and pharmaceutical applications. Healthcare management of change, biocompatible (ISO 10993 or USP Class VI), food contact compliant...
Tensile Strength, Yield	47.0 MPa	6820 psi	Type I, 50 mm/min; ASTM D 638
SABIC Innovative Plastics Xylex X8300HP PC+POLYESTER (Europe-Africa-Middle East) Transparent, US Food Contact compliant, chemically resistant. This grade will no longer be supported with biocompatibility information and should not be used for medical applications which require b..
Tensile Strength, Yield	47.0 MPa	6820 psi	2 in/min; ASTM Test
Styrolution LuranÂ® S 757 G ASA Luran S 757 G is an easy flowing injection molding ASA grade with large flow path/wall thickness ratios.Information provided by STYROLUTION, which is a joint venture between BASF and INEOS.
Tensile Strength, Yield	47.0 MPa	6820 psi	ISO 527-2
Styron MAGNUMâ„¢ 375 HP Acrylonitrile Butadiene Styrene (ABS) Resin Overview: High Heat, Low Gloss, Medium Impact ABS resin for injection molded automotive interior trim applications.Applications: Chrysler-MSDB-191Ford-WSB-M4D690-AGM-GMP.ABS.009Information provided ..
Tensile Strength, Yield	47.0 MPa	6820 psi	5 mm/min; ISO 527
SABIC Innovative Plastics LNP Thermocomp MFK42AS PP (Europe-Africa-Middle East) LNP* THERMOCOMP* MFK42AS is a compound based on PP resin containing Glass Fiber, Mineral.This data was supplied by SABIC-IP for the Europe-Africa-Middle East region.
Tensile Strength, Yield	47.0 MPa	6820 psi	5 mm/min; ISO 527
SABIC Innovative Plastics LNP Thermocomp WB008 PBT LNP* Thermocomp* WB008 is a compound based on Thermoplastic Polyester (PBT) containing Glass Beads.This data was supplied by SABIC-IP for the Americas region.
Tensile Strength, Yield	47.0 MPa	6820 psi	ASTM D638
Polyram RamLloy PBB106 PC/ABS Alloy, UV Stabilized UV stabilized PC/ABS alloy for injection molding applications.Information provided by Polyram.
Tensile Strength, Yield	47.0 MPa	6820 psi	ISO 527
A. Schulman FORMION™ FI 233 15% Mineral Reinforced Ionomer / Nylon Alloy DescriptionFormion® FI 233 is an injection molding grade, 15% mineral reinforced Ionomer / Nylon alloy, which has been formulated for high scratch resistance, heat resistance and high stiffness. A..
Tensile Strength, Yield	47.0 MPa	6820 psi	Elastic Limit
Wolf Kunststoff ZEDEX® ZX-530 A5D Polymer Alloy Main Characteristics: Low Creep; Low moisture absorption; Flame retardant; Low impurity ions; Good machinability; FDA compliant LABS; Extremely low outgassing; Less expensive than PEEK; Stress resis..
Tensile Strength, Yield	47.0 MPa	6820 psi	ISO 527
A. Schulman FORMION™ FI 233 15% Mineral Reinforced Ionomer / Nylon Alloy DescriptionFormion® FI 233 is an injection molding grade, 15% mineral reinforced Ionomer / Nylon alloy, which has been formulated for high scratch resistance, heat resistance and high stiffness. A..
Tensile Strength, Yield	47.0 MPa	6820 psi	ASTM D638
Eastman DuraStar DS1000 Polymer, Natural Durastar DS1000 polymer has excellent appearance and clarity. Its most outstanding features are chemical resistance and excellent processing characteristics. Exposure to aromatic oils often causes c..
Tensile Strength, Yield	47.0 MPa	6820 psi	ISO 527
Eastman DuraStar DS2110UVI Polymer, Natural Durastar DS2110UVI polymer, contains an ultraviolet light stabilization package. It is recommended for indoor applications requiring enhanced color stability upon extended exposure to fluorescent li..
Tensile Strength, Yield	47.0 MPa	6820 psi	ASTM D638
Eastman Provista MP002 Copolymer Provista Copolymer MP002 is a resin specifically developed for extrusion into profiles for medical applications where aesthetics such as high clarity and gloss, coupled with design flexibility and e..
Tensile Strength, Yield	47.0 MPa	6820 psi	ASTM D 638
Cossa Polimeri ESTADIENE 1218 HT V0 Flame Retardant ABS Acrylonitrile Butadiene StyreneFlame retardant class V0, PBDE free, good impact resistance, excellent processability, good surface appearance, high thermal resistanceInformation provided by Cossa Po..
Tensile Strength, Yield	47.0 MPa	6820 psi	DAM; ISO 527-1/-2
DuPont Performance Polymers Zytel® ST801AHS BK010 Nylon 66 (Unverified Data**) Super Toughened Heat Stabilized Polyamide 66 Zytel ST801AHS BK010 is a Super Tough high performance black polyamide 66 resin. It offers outstanding molding performance in injection molding applicati..
Tensile Strength, Yield	47.0 MPa	6820 psi	50 mm/min; ISO 527
Chi Mei Polyrex® PG-80 Polystyrene High strength
Tensile Strength, Yield	47.0 MPa	6820 psi	ASTM D638
Ashley Polymers Ashlene® P114 PBT Polyester A high impact polyester with low shrinkage.Data provided by the manufacturer
Tensile Strength, Yield	47.0 MPa	6820 psi	Wet; ASTM D638
Asahi Kasei Leona® FR200 Nylon 66 UL94 V-0; halogen-free and phosphor-free.Applications:Connectors, switches, and other electrical and electronic parts Information provided by Asahi Kasei
Tensile Strength, Yield	47.0 MPa	6820 psi	50 mm/min; ISO 527
SABIC Innovative Plastics NORYL RN0712 PPE+HIPS (Asia Pacific) Noryl RN0712 is an unfilled Post Consumer recycle (PCR) based injection moldable modified polyphenylene ether resin comprising at least 37% PCR styrenic series resin content. Designed for good dimen..
Tensile Strength, Yield	47.0 MPa	6820 psi	ASTM D638
SABIC Innovative Plastics LNP STAT-KON ME003S PP LNP* STAT-KON* ME003S is a compound based on Polypropylene resin containing 15% Carbon Fiber. Added features of this material include: Electrically Conductive, Heat Stabilized.