Polymer Property : Tensile Strength, Yield = 90.0 MPa Product List

Mechanical Properties

Tips: 30 items are displayed at most.

Mechanical Properties	Metric	English	Comments
Tensile Strength, Yield	90.0 MPa	13100 psi	dry; ISO 527-1
Murtfeldt Murylon® A Nylon 66 This material combines the excellent properties of the Murylon® range with additional high tensile and compressive strength, increased wear resistance, and a lower level of moisture absorption than..
Tensile Strength, Yield	90.0 MPa	13100 psi	ISO 527, ASTM D638
Nilit Nilamid A3 H G3 ZB 13% Glass Reinforced High Impact PA66 Description: Nilamid A3 H G3 ZB (13% Glass Reinforced) was developed for applications that require a combination of high stiffness and good elongation or impact resistance. It is widely used for app..
Tensile Strength, Yield	90.0 MPa	13100 psi	ISO 527
Victrex® PEEK 650P PolyEtherEtherKetone High performance thermoplastic material, unreinforced PolyEtherEtherKetone (PEEK), semi crystalline, coarse powder for extrusion compounding, low flow, FDA food contact compliant, color natural.Info..
Tensile Strength, Yield	90.0 MPa	13100 psi	ISO 527
GEHR Plastics PET Polyethylene Terephthalate Polyethylene terephthalate shows high tensile and mechanical strength, hardness and toughness, low friction and a high dimensional stability. PET may be used at temperatures ranging from -20Â°C to..
Tensile Strength, Yield	90.0 MPa <br>@Temperature 22.0 Â°C	13100 psi <br>@Temperature 71.6 Â°F	25mm flat samples, compression moulded; ISO 527-4
Menzolit MenzolitÂ® SMC 0400 Unsaturated Polyester UP SMC 0400 is a Class-A SMC for exterior body applications on cars, LCVÂ´s and trucks. These compounds mould to parts with good up to excellent surface quality for medium bake in-line and off-line p..
Tensile Strength, Yield	90.0 MPa	13100 psi	ISO 527-1/-2
Lanxess DurethanÂ® A 30 H2.0 901510 Nylon 66 PA 66 standard injection molding grade, non-reinforced, very easy release, good heat-ageing resistanceApplication Examples: terminal blocks, cable clips, bobbins, gearwheels
Tensile Strength, Yield	90.0 MPa	13100 psi	Type I, 5 mm/min; ASTM D638
SABIC Innovative Plastics ValoxÂ® VX5011 PBT (Europe-Africa-Middle East) VALOX VX5011 is a 10% glass fibre reinforced PBT+PC blend with low warpage characteristics.
Tensile Strength, Yield	90.0 MPa	13100 psi	ASTM D638
SPS Guang Zhou POBUXâ„¢ 3001EPG20 Non-halogen flame retardance/GF20%-PBT Characteristic: Good flame retardance, high mechanical properties, high rigidity, superior heat resistance, good dimensional stabilityApplications: E/E partsInformation Provided by SPS (Guang Zhou) ..
Tensile Strength, Yield	90.0 MPa	13100 psi	Type I, 5 mm/min; ASTM D 638
SABIC Innovative Plastics Noryl GTX GTX4110 PPE+PA66 (Europe-Africa-Middle East) Non-brominated, non-chorinated Flame Retardant PPE/PA66 alloy, 10% glass reinforced. Combines ductility, modulus and high CTI with dimensional stability.This data was supplied by SABIC-IP for the E..
Tensile Strength, Yield	90.0 MPa	13100 psi	Type I, 5 mm/min; ASTM D638
SABIC Innovative Plastics NORYL GFN1720 PPE+HIPS Noryl* GFN1720 is a 20% glass fiber reinforced, injection moldable grade. This modified polyphenylene ether resin is designed to deliver a balance of heat, strength and electrical properties. Noryl ..
Tensile Strength, Yield	90.0 MPa	13100 psi	Type I, 5 mm/min; ASTM D 638
SABIC Innovative Plastics Noryl GTX GTX4110 PPE+PA66 Non-brominated, non-chorinated Flame Retardant PPE/PA66 alloy, 10% glass reinforced. Combines ductility, modulus and high CTI with dimensional stability.This data was supplied by SABIC-IP for the A..
Tensile Strength, Yield	90.0 MPa	13100 psi	ISO 527 type 1 A
Solvay TECHNYLÂ® A 216 S40 PA66, 40% glass spheres, DRY Description: Polyamide 66, reinforced with 40% of glass spheres, for injection molding.Available in: EuropeProduct Applications: TECHNYL Â® A 216 S40 is used in all sectors of industry, offering a..
Tensile Strength, Yield	90.0 MPa	13100 psi	ASTM D638
A. Schulman POLYFORT™ FPP 1239H Glass Filled Chemically Coupled Homopolymer Polypropylene DescriptionPolyfort® FPP 1239H is a 30% glass filled chemically coupled homopolymer polypropylene product. Information provided by A. Schulman.
Tensile Strength, Yield	90.0 MPa	13100 psi	ASTM D638
A. Schulman POLYFORT™ FPP 1239H Glass Filled Chemically Coupled Homopolymer Polypropylene DescriptionPolyfort® FPP 1239H is a 30% glass filled chemically coupled homopolymer polypropylene product. Information provided by A. Schulman.
Tensile Strength, Yield	90.0 MPa	13100 psi	ISO 527
Polyram PlusTek PA108 Nylon6/6.6 Alloy for Injection Molding Good surface finish Nylon 6/6.6 alloy for injection molding.Information provided by Polyram.
Tensile Strength, Yield	90.0 MPa	13100 psi	ISO 527
Polyram PlusTek PA201 Nylon 66 for Extrusion High viscosity Nylon 66 for extrusion applications.Information provided by Polyram.
Tensile Strength, Yield	90.0 MPa	13100 psi	ASTM-D638
Polyram RamTal PM3013G4 Acetal, 20% Glass Fiber 20% Glass fiber reinforced polyacetal for injection molding applicationsInformation provided by Polyram Ram On Ind.
Tensile Strength, Yield	90.0 MPa	13100 psi	ASTM-D638
Polyram PlusTek RA124 Nylon 6.6, Injection Molding Fast cycle polyamide 6.6 for injection molding applicationsInformation provided by Polyram Ram On Ind.
Tensile Strength, Yield	90.0 MPa	13100 psi	ISO 527
Polyram RamOfin PPH301G6NT Polypropylene, 30% Glass Fiber 30% Glass fiber reinforced polypropylene for injection molding applications. Approved and listed by WRAS Potable Water.Information provided by Polyram.
Tensile Strength, Yield	90.0 MPa	13100 psi	50 mm/min; ISO 527
CP-Polymer-Technik Wellamid® 6600 HWS Nylon 66, Finely Crystalline, Heat Stabilized, Dry Information provided by CP-Polymer-Technik GmbH & Co. KG
Tensile Strength, Yield	90.0 MPa	13100 psi	ISO 527
Eurostar Star X RF003IU2-BK3047 PA66, Glass Fiber Filled, Impact Modified, Injection Molded Star X RF003IU2-BK3047 is an Impact Modified, Glass Fiber Reinforced, UV stabilized Polyamide 66/6 Injection Molding (also known as Star X D 1010 14V/3/047)Information provided by Eurostar.
Tensile Strength, Yield	90.0 MPa	13100 psi
Covestro Makroblend® UT-640 G Polycarbonate + Polyester Blend Key Features:Contains FillerHigh impact or high impact modifiedLight stabilized or stable to lightSuitable processing methods:Injection moldingInformation provided by Bayer Polymers.As of 1 Septembe..
Tensile Strength, Yield	90.0 MPa	13100 psi	50mm/min; ISO 527
BASF Ultramid® 1310-11 NF2001 PA66 (Dry) Ultramid 1310-11 NF2001 is a controlled crystallization, fast cycling PA6/6 which provides extremely fast cycle times and improved productivity over Ultramid 1000.
Tensile Strength, Yield	90.0 MPa	13100 psi	50mm/min; ISO 527
BASF Ultramid® B27 E 01 PA6 (Dry) Ultramid B27 E 01 is a low viscosity general-purpose, extrusion PA6 grade well suited for compounding. It conforms to FDA requirements including, 21 CFR 177.1500,EU Directive 2002/72/EC, the German..
Tensile Strength, Yield	90.0 MPa	13100 psi	v = 50 mm/min; ISO 527-2
CENTROPLAST CENTROLYTE FG Polyethylene terephthalate, Food Grade This material is electrically insulating, with good chemical resistance, high mechanical strength and wear resistance.Information provided by CENTROPLAST Engineering Plastics GMBH
Tensile Strength, Yield	90.0 MPa	13100 psi	ISO 527-1/-2
DSM Akulon® F223-DH Nylon 6 (European Grade) (Dry)  (discontinued **) The Akulon® product portfolio is engineered for optimum performance to suit different processing techniques and end use markets. Akulon Nylon 6 is used for extrusion applications including barrier ..
Tensile Strength, Yield	90.0 MPa	13100 psi	Type I, 5 mm/min; ASTM D638
SABIC Innovative Plastics Lexan® 3412ECR PC (Asia Pacific) Lexan* 3412ECR Polycarbonate (PC) resin is a 20% glass fiber filled, injection moldable grade. This non-chlorinated, non-brominated flame retardant GF-PC has an UL-94 V0 rating and is available in v..
Tensile Strength, Yield	90.0 MPa	13100 psi	v = 5 mm/min; ISO 527-2
CENTROPLAST CENTROTRON Polyphenylene sulfide CENTROTRON is a plastic that is resistant to oxidation and hydrolysis which can be used at high operating temperatures. Applications include plug connectors, sensor housings and parts for electrica..
Tensile Strength, Yield	90.0 MPa	13100 psi	ASTM D638
Gharda Chemicals Gafone™ B2300 Polysupersulfone (PSS)  (discontinued **) Characteristics: Excellent Dimensional properties Transparent Improved Impact Strength and Toughness as compared to PES Excellent Hydorlytic Stability High Stress Cracking Resistance Good Chemical..