- HOME
- POLYMER SEARCH
- Polymer Property : Tensile Modulus = 1570 ksi
Polymer Property : Tensile Modulus = 1570 ksi Product List
Mechanical PropertiesTips: 30 items are displayed at most.
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Tensile Modulus | 10.8 GPa | 1570 ksi | 50 mm/min; ASTM D638 |
|
Ovation Polymers RIGITRON 30545 GF Polyester, 45% Glass Reinforced
Polyester – 45% Glass Fiber Reinforced PET. *All properties are measured after 48 hours of conditioning at 23°C and 50% relative humidity. All samples are prepared according to ASTM standards. Var..
|
|||
| Tensile Modulus | 10.8 GPa | 1570 ksi | (12µm polyimide/9µm copper); ASTM D882-02 |
|
NeXolve TR-Clad™ Flexible Polyimide Laminate
The lightest weight copper clad laminates available.TR-Clad™ Flexible Laminates are both the lowest weight and lowest dielectric constant of copper/polyimide laminates available. Additionally, TR..
|
|||
| Tensile Modulus | 10.8 GPa | 1570 ksi | ASTM D638 |
|
LNP Thermotuf® OF-1006 HI Polyphenylene Sulfide, Glass Fiber Reinforcement
(discontinued **)
Features: High Impact ResistanceForms: PelletsProcessing Method: Injection MoldingInformation provided by LNP, a GE Plastics Company.This data sheet is labeled Discontinued; however many LNP grades ..
|
|||
| Tensile Modulus |
10.8
GPa <br>@Temperature 100 °C
|
1570
ksi <br>@Temperature 212 °F
|
ISO 527-2 |
|
Solvay Specialty Polymers Amodel® A-1133 HS Polyphthalamide (PPA)
(Unverified Data**)
Amodel A-1133 HS is a 33% glass reinforced, heat stabilized polyphthalamide (PPA) with a high heat deflection temperature, high flexural modulus and high tensile strength. Excellent creep resistance..
|
|||
| Tensile Modulus | 10.8 GPa | 1570 ksi | ASTM D638 |
|
Greene Tweed WRâ„¢ 300 PEEK, Carbon Filled
WR®300 is a carbon-fiber reinforced compression molded PEEK often selected by pump manufacturers and users for pump bushings and case or impeller wear rings. Maximum service life is achieved in ..
|
|||
| Tensile Modulus | 10.8 GPa | 1570 ksi | ISO 527-1/-2 |
|
Lanxess Durethan® BKV 30 FN00 000000 Nylon 6, 30% Glass Fiber
PA6, injection molding grade, 30% glass fibers, UL94 V-0 at 0,75 mm , free of halogen and red phosphorus, glow wire flammability test max. 960°C
|
|||
| Tensile Modulus |
10.8
GPa <br>@Temperature 100 °C
|
1570
ksi <br>@Temperature 212 °F
|
4; ISO 527-2 |
|
Solvay Specialty Polymers Amodel® AE-1133 Polyphthalamide (PPA), 33% Glass Fiber
Amodel® AE-1133 is a 33% glass reinforced, heat stabilized polyphthalamide (PPA) designed to work in the modern automotive electrical environment. It has a high heat deflection temperature, high ..
|
|||
| Tensile Modulus | 10.8 GPa | 1570 ksi | 1 mm/min; ISO 527 |
|
SABIC Innovative Plastics LNP STAT-KON DX99873C PC
LNP STAT-KON* DX99872C is a compound based on Polycarbonate resin containing Proprietary Filler(s). Added features of this material include: Clean Compounding System, Electrically Conductive.
|
|||
| Tensile Modulus | 10.8 GPa | 1570 ksi | 1 mm/min; ISO 527 |
|
SABIC Innovative Plastics LNP STAT-KON WE003ER PBT (Europe-Africa-Middle East)
LNP* Stat-kon* WE003ER is a compound based on Polybutylene Terephalate resin containing Carbon Fiber. Added features of this material include: Easy Molding, Easy Release, Electrically Conductive.
|
|||
| Tensile Modulus | 10.8 GPa | 1570 ksi | 5 mm/min; ASTM D638 |
|
Solvay Specialty Polymers KetaSpire® KT-880 GF30 Polyetheretherketone (PEEK), 30% Glass Fiber
KetaSpire® KT-880 GF30 is the high-flow, 30% glass-fiber reinforced grade of polyetheretherketone (PEEK). This resin offers higher strength and stiffness properties relative to unreinforced KetaS..
|
|||
| Tensile Modulus | 10.8 GPa | 1570 ksi | ASTM D638 |
|
Plenco 1586 Polyester, Pellet, Transfer Molded
PLENCO 01586 is a glass and mineral reinforced pelletized polyester molding compound offering excellent heat resistance and mechanical strength properties. This product is typically used for injecti..
|
|||
| Tensile Modulus | 10.8 GPa | 1570 ksi | ISO 527-1/-2 |
|
Unitika A1022GFL60 PA6, 60% Glass Fiber Reinforced, Conditioned
Information provided by Unitika Ltd.
|
|||
| Tensile Modulus | 10.8 GPa | 1570 ksi | ISO 527-1/-2 |
|
Unitika A1025GO PA6, Flame Retardant, Dry
Information provided by Unitika Ltd.
|
|||
| Tensile Modulus | 10.8 GPa | 1570 ksi | 50%RH; ISO 527-1/-2 |
|
DuPont Performance Polymers Zytel® HTN 54G35HSLR BK031 Polyphthalamide (PPA)
(Unverified Data**)
35% Glass Reinforced Toughened PPA High Performance Polyamide Zytel HTN54G35HSLR BK031 is a 35% glass reinforced toughened heat stabilized hydrolysis resistant high performance polyamide resin. It i..
|
|||
| Tensile Modulus | 10.8 GPa | 1570 ksi | ISO 527 |
|
BASF Ultramid® N-276 BK ND 3007 40% Glass/Mineral Filled PA66
Description: Ultramid N-276 BK ND3007 is a 40% mineral/glass reinforced, heat stabilized injection molding PA6/6.Information provided by BASF
|
|||
| Tensile Modulus |
10.8
GPa <br>@Treatment Temp. 70.0 °C,<br> Time 1.15e+6 sec
|
1570
ksi <br>@Treatment Temp. 158 °F,<br> Time 320 hour
|
62% rel. humidity |
|
Akro-Plastic Akromid® S3 GF 50 1 (3533) PA 6.10 Dry, 50% Glass Filled
A characteristic property of AKROMID® S (PA 6.10) is that it has a renewable-resource content of up to 70 % and therefore fulfils the current definition of a bioplastic. The plant-based raw materia..
|
|||
| Tensile Modulus | 10.8 GPa | 1570 ksi | 1mm/min; ISO 527 |
|
BASF Ultramid® 1503-2 BK ND3007 33% Glass Filled PA66 (Dry)
Ultramid 1503-2 BK ND3007 is a 33% glass reinforced, heat stabilized, pigmented black injection molding PA6/6.
|
|||
| Tensile Modulus | 10.8 GPa | 1570 ksi | 1mm/min; ISO 527 |
|
BASF Ultramid® 1503-2 NF2004 33% Glass Filled PA66 (Dry)
Ultramid 1503-2 NF2004 is a 33% glass reinforced, heat stabilized injection molding PA6/6.
|
|||
| Tensile Modulus | 10.8 GPa | 1570 ksi | ISO 527 |
|
BASF Ultramid® 1503-2F BK ND 3007 33% Glass Filled PA 66 (Dry)
Description: Ultramid 1503-2F BK ND3007 is a 33% glass reinforced, heat stabilized injection molding PA6/6 grade. It is designed to provide enhance hydroysis resistance for under-the-hood applicatio..
|
|||
| Tensile Modulus | 10.8 GPa | 1570 ksi | ISO 527-2 |
|
Ascend Performance Materials Vydyne® R533H NAT Nylon 66, 33% Glass Reinforced, DAM
Vydyne® R533H NAT is 33% glass-fiber reinforced, hydrolysis-resistant, heat-stabilized PA66 resin. Available in natural, it is specifically designed to maximize the retention of physical properties..
|
|||
| Tensile Modulus | 10.8 GPa | 1570 ksi | ISO 527-2 |
|
Ascend Performance Materials Vydyne® R633 Nylon 66 Copolymer, 33% Glass Filled, Dry as Molded
Vydyne® R633 is 33% glass-fiber reinforced, PA66/6 copolymer resin for superior surface appearance. Available in natural, this injection-molding grade resin is lubricated for machine feed and mold ..
|
|||
| Tensile Modulus | 10.8 GPa | 1570 ksi | ISO 527-2 |
|
Ascend Performance Materials Vydyne® R633H Nylon 66/6, 33% Glass Reinforced, DAM
Vydyne® R633H is 33% glass-fiber reinforced PA66/6 copolymer resin for superior surface appearance. Available in natural, this injection-molding grade resin is lubricated for machine feed and mold ..
|
|||
| Tensile Modulus | 10.8 GPa | 1570 ksi | ASTM D638 |
|
LNP Thermocomp® JF-1006 Polyethersulfone, Glass Fiber Reinforcement
(discontinued **)
Forms: PelletsProcessing Method: Injection MoldingInformation provided by LNP, a GE Plastics Company.This data sheet is labeled Discontinued; however many LNP grades are still active under new names..
|
|||
| Tensile Modulus | 10.8 GPa | 1570 ksi | ISO 527-1/-2 |
|
Lanxess Durethan® DP AKV 35 LT H2.0 904040 Nylon 66, 35% Glass Fiber
PA 66, injection molding grade, 35% glass fibers, black colored for laser transmission- welding (laser-transparent), good heat-ageing resistance
|
|||
Copyright © lookpolymers.com All Rights Reserved