Polymer Property : Tensile Modulus = 3.45 GPa Product List

Mechanical Properties

Tips: 30 items are displayed at most.

Mechanical Properties	Metric	English	Comments
Tensile Modulus	3.45 GPa	500 ksi	MD, supporting material; ASTM D882
Rogers Corporation Poron® 4790-92-09 Urethane Foam, Extra Soft, Slow Rebound, PET Reinforced Extra soft, slow rebound with a very low closure force. Standard available thickness range from 0.021" to 0.500" (0.53 mm to 12.7 mm).Features and Benefits of PORON Products: Excellent compression ..
Tensile Modulus	3.45 GPa	500 ksi	MD, supporting material; ASTM D882
Rogers Corporation Poron® 4790-92-20 Supported Urethane Foam, Extra Soft, Slow Rebound, PET Reinforced Extra soft, slow rebound with a very low closure force. Standard available thickness range from 0.021" to 0.500" (0.53 mm to 12.7 mm).Features and Benefits of PORON Products: Excellent compression ..
Tensile Modulus	3.45 GPa	501 ksi	chs 2 in/min; ASTM D638
Network Polymers MS 100 Styrene Methyl Methacrylate Copolymer Description: Styrene Methyl Methacrylate CopolymerInformation provided by Network Polymers Inc.
Tensile Modulus	3.45 GPa	500 ksi	ASTM D638
Polymer Resources PEI-GP1-TFE5 Polyetherimide, 5% PTFE, Flame Retardant Polyetherimide, General Purpose, 5% PTFE, Flame Retardant Process: Injection MoldingNotes: All physical, mechanical and thermal testing conducted on 1/8-inch thick, un-pigmented, test samples.Inform..
Tensile Modulus	3.45 GPa	500 ksi	1 mm/min; ISO 527
SABIC Innovative Plastics LNP FARADEX NX96302 PC+ABS LNP* FARADEX* NX96302 is a compound based on PC+ABS resin containing Stainless Steel Fibers.
Tensile Modulus	3.45 GPa	500 ksi	Dried; ISO 527
Manifattura Cattaneo PA 6.6 Nylon Manifattura Cattaneo products are available in semi-finished forms such as bars, profiles, sheets and plates.Information provided by Manifattura Cattaneo s.p.a.
Tensile Modulus	3.45 GPa	500 ksi
Ineos ABS LustranÂ® SAN 31 51 Key Features:UnfilledSuitable processing methods:Injection molding
Tensile Modulus	3.45 GPa	500 ksi	50 mm/min; ASTM D638
SABIC Innovative Plastics LNP STAT-KON DD0001 PC LNP STAT-KON* DD0001 is a compound based on Polycarbonate resin containing Carbon Powder. Added features of this material include: Electrically Conductive, Flame Retardant.
Tensile Modulus	3.45 GPa	500 ksi	50 mm/min; ASTM D638
SABIC Innovative Plastics LNP STAT-KON DD0001 PC (Europe-Africa-Middle East) LNP STAT-KON* DD0001 is a compound based on Polycarbonate resin containing Carbon Powder, Flame Retardant. Added features of this material include: Electrically Conductive.
Tensile Modulus	3.45 GPa	500 ksi	50 mm/min; ASTM D 638
SABIC Innovative Plastics LNP Stat-kon RX89129 PA 66 LNP* Stat-Kon RX89129 is a compound based on Nylon 6,6. Fillers are proprietary.This data was supplied by SABIC-IP for the Americas region.
Tensile Modulus	>= 3.45 GPa <br>@Temperature 23.9 °C	>= 500 ksi <br>@Temperature 75.0 °F
Master Bond EP21ANHT Two Component, Room Temperature Curing Epoxy Adhesive Product Description: Master Bond Polymer Adhesive EP21ANHT is a two component room temperature curing adhesive, sealant and coating that combines high thermal conductivity and electrical insulation ..
Tensile Modulus	3.45 GPa	500 ksi
Loctite® 3565 High performance epoxy, high Tg and low CTE High Tg Underfill COB/DCA Encapsulants are essential to the reliability of flip chip assemblies because they minimize the thermal mismatch between the flip chip and substrate.Loctite® Underfills and Encapsulants imp..
Tensile Modulus	3.45 GPa	500 ksi	ASTM D638
Ensinger Tecapeek® XP-119 Compression Molded PEEK Compound, 10% Carbon Fiber Ensinger Special Polymers offers over twenty different VICTREX® PEEK blends to choose from and has the capability to blend custom compounds for specific applications. Compression molding results in..
Tensile Modulus	3.45 GPa	500 ksi	ASTM D638
Quantum PEEK Information provided by Quantum Advanced Engineering Plastics