Polymer Property : Film Tensile Strength at Break, TD = 34000 psi Product List

Mechanical Properties

Tips: 30 items are displayed at most.

Mechanical Properties	Metric	English	Comments
Film Tensile Strength at Break, TD	234 MPa	34000 psi	20 in/min, 2.0 in Jaw Separation; ExxonMobil Method
ExxonMobil Bicor® 150 ASB-X OPP Film Product Description: Bicor ASB-X is a two side coated, sealable OPP film designed for broad use in many applications, including overwrap, horizontal, and vertical packaging. This film is suitable as..
Film Tensile Strength at Break, TD	234 MPa	34000 psi	20 in/min, 2.0 in Jaw Separation; ExxonMobil Method
ExxonMobil Bicor® 30 ARW OPP Film Product Description: Bicor ARW is a two-side acrylic coated OPP film designed for use in lamination and monoweb applications, especially for paper ream wrap. The acrylic-coated side with the higher ..
Film Tensile Strength at Break, TD	234 MPa	34000 psi	20 in/min, 2.0 in Jaw Separation; ExxonMobil Method
ExxonMobil Bicor® 50 LBW OPP Film Product Description: Bicor LBW is a two-sided treated, slip modified, non-heat sealable OPP film designed for use as the outside web of a lamination. The print surface is treated and can be printed ..
Film Tensile Strength at Break, TD	234 MPa	34000 psi	20 in/min, 2.0 in Jaw Separation; ExxonMobil Method
ExxonMobil Bicor® 85 LTSC OPP Film Product Description: Bicor LTSC is a two-side coated OPP film which is designed for use in high-speed or demanding horizontal, fin seal, packaging applications. The low-temperature seal coating (LTS..
Film Tensile Strength at Break, TD	234 MPa	34000 psi	20 in/min, 2.0 in Jaw Separation; ExxonMobil Method
ExxonMobil Metallyte® 70 MET OPP Film Product Description: A moderate barrier, metalized OPP film for use in adhesive and extrusion laminations to reveres-printed outer webs. The proprietary broad seal range layer offers excellent hot t..
Film Tensile Strength at Break, TD	234 MPa	34000 psi	20 in/min, 2.0 in Jaw Separation; ExxonMobil Method
ExxonMobil Metallyte® 70 MET-HB OPP Film Product Description: A vacuum-metallized, high barrier OPP film with a proprietary sealant layer. This film offers excellent moisture and oxygen barriers, hot tack, seal integrity, and lap seal rang..
Film Tensile Strength at Break, TD	234 MPa	34000 psi	7.9 in/min, 4.9 in Jaw Separation; ExxonMobil Method
ExxonMobil Metallyte™ 18MM882 OPP Film Product Description: An ultra high barrier (UHB), biaxially oriented, multilayer polypropylene film. In addition to an excellent water vapor barrier, this film has an exceptional barrier to oxygen, ..
Film Tensile Strength at Break, TD	234 MPa	34000 psi	ASTM D882A
DuPont Teijin Films Melinex® 197 Polyester Film Melinex® 197 is a very clear polyester film with good handling properties, suitable for general purpose applications.Information provided by DuPont.
Film Tensile Strength at Break, TD	234 MPa	34000 psi	ASTM D882A
DuPont Teijin Films Mylar® A Polyester Film, 142 Gauge Mylar® A films are tough, general purpose films that are transparent in 48 through 92 gauge and translucent in heavier gauges. They have a rough surface to provide ease of handling, good adhesion, ..
Film Tensile Strength at Break, TD	234 MPa	34000 psi	ASTM D882A
DuPont Teijin Films Mylar® D804 Polyester Film, 92 Gauge Mylar® D804 is a super clear, biaxially oriented, co-extruded polyester film, available in 60, 75 and 92 gauge. Mylar® D804 is two-side pretreated for printing and adhesive lamination. Approvals: ..
Film Tensile Strength at Break, TD	234 MPa	34000 psi	ASTM D882A
DuPont Teijin Films Mylar® EL Polyester Film, 142 Gauge Mylar® EL films, typically 48 through 500 gauge are strong, tough, general -purpose films for electrical/electronic uses. Heavier gauges of Mylar® EL films are similar to Mylar® MO films. Availab..
Film Tensile Strength at Break, TD	234 MPa	34000 psi	ASTM D882A
DuPont Teijin Films Mylar® EL Polyester Film, 75 Gauge Mylar® EL films, typically 48 through 500 gauge are strong, tough, general -purpose films for electrical/electronic uses. Heavier gauges of Mylar® EL films are similar to Mylar® MO films. Availab..
Film Tensile Strength at Break, TD	234 MPa	34000 psi	ASTM D882A
DuPont Teijin Films Mylar® ELS951 Polyester Film, 92 Gauge Mylar® ELS951 is an specialized film being produced to provide a clear film substrate with good handling characteristics for use in window film, release sheet applications. The MD/TD shrinkage rati..
Film Tensile Strength at Break, TD	234 MPa	34000 psi	ASTM D882A
DuPont Teijin Films Mylar® HR951 Polyester Film, 140 Gauge Mylar® HR951 is a one-side release coated polyester film with good handling properties and clarity. It has been developed for use in various industrial applications.Information provided by DuPont.
Film Tensile Strength at Break, TD	234 MPa	34000 psi	ASTM D882A
DuPont Teijin Films Mylar® LBTW Polyester Film, 48 Gauge Mylar® LBTW is an uncoated, transparent polyester film that has been corona treated on one side to provide superior wetting and adhesion of inks, primers, and adhesives. Mylar® LBTW is commerciall..
Film Tensile Strength at Break, TD	234 MPa	34000 psi	ASTM D882A
DuPont Teijin Films Mylar® MDA Polyester Film, 75 Gauge Mylar® MDA films are tough, general purpose films that are transparent in 48 through 92 gauge and translucent in heavier gauges. They have a rough surface to provide ease of handling, good adhesion..
Film Tensile Strength at Break, TD	234 MPa	34000 psi	ASTM D882A
DuPont Teijin Films Mylar® RSX951 Polyester Film, 105 Gauge Mylar® RSX951 is a silicone coated polyester film designed for use as a release liner in various casting applications. The silicone release coating is applied to the film during the film production..
Film Tensile Strength at Break, TD	234 MPa	34000 psi	ASTM D882A
DuPont Teijin Films Mylar® RSX951 Polyester Film, 175 Gauge Mylar® RSX951 is a silicone coated polyester film designed for use as a release liner in various casting applications. The silicone release coating is applied to the film during the film production..
Film Tensile Strength at Break, TD	234 MPa	34000 psi	ASTM D882A
DuPont Teijin Films Mylar® RSX951 Polyester Film, 48 Gauge Mylar® RSX951 is a silicone coated polyester film designed for use as a release liner in various casting applications. The silicone release coating is applied to the film during the film production..
Film Tensile Strength at Break, TD	234 MPa	34000 psi	ASTM D882A
DuPont Teijin Films Mylar® RSX951 Polyester Film, 92 Gauge Mylar® RSX951 is a silicone coated polyester film designed for use as a release liner in various casting applications. The silicone release coating is applied to the film during the film production..
Film Tensile Strength at Break, TD	234 MPa	34000 psi	ASTM D882A
DuPont Teijin Films Mylar® WC11/WC22 Polyester Film, 284 Gauge Mylar® type WC11 films are general-purpose electrical grade films, similar to Mylar® EL. These clear to hazy films are tough and durable as a core wrap. They offer good dielectric and good handlin..
Film Tensile Strength at Break, TD	234 MPa	34000 psi	ASTM D882A
DuPont Teijin Films Teijin® Tetoron® SLA Polyester Film, 500 Gauge Teijin® Tetoron® SLA is a super low shrinkage version of Teijin® Tetoron® type S polyester film. In addition to having the well balanced physical, chemical and electrical properties of type S fi..
Film Tensile Strength at Break, TD	234 MPa	34000 psi	JIS C-2318 (Modified to TDF)
DuPont Teijin Films Teonex® Q83 Polyester Film, 200 Gauge Teonex® Q83 is biaxially oriented, slightly hazy polyethylene naphthalate (PEN) film with excellent handling properties and high dimensional stability. It is commercially available in 100, 200 and ..
Film Tensile Strength at Break, TD	234 MPa	34000 psi	20 in/min, 2.0 in Jaw Separation; ExxonMobil Method
ExxonMobil Bicor™ 25 ARW OPP Film Product Description: Bicor ARW is a two-side acrylic-coated OPP film designed for use in lamination and monoweb applications, especially for paper ream wrap. The acrylic-coated side with the higher ..
Film Tensile Strength at Break, TD	234 MPa	34000 psi	ASTM D882A
DuPont Teijin Films Mylar® A Polyester Film, 92 Gauge Mylar® A films are tough, general purpose films that are transparent in 48 through 92 gauge and translucent in heavier gauges. They have a rough surface to provide ease of handling, good adhesion, ..
Film Tensile Strength at Break, TD	234 MPa	34000 psi	ASTM D882A
DuPont Teijin Films Mylar® HR951 Polyester Film, 92 Gauge Mylar® HR951 is a one-side release coated polyester film with good handling properties and clarity. It has been developed for use in various industrial applications.Information provided by DuPont.
Film Tensile Strength at Break, TD	234 MPa	34000 psi	ASTM D882A
DuPont Teijin Films Mylar® MDA Polyester Film, 142 Gauge Mylar® MDA films are tough, general purpose films that are transparent in 48 through 92 gauge and translucent in heavier gauges. They have a rough surface to provide ease of handling, good adhesion..
Film Tensile Strength at Break, TD	234 MPa	34000 psi	ASTM D882A
DuPont Teijin Films Mylar® MDA Polyester Film, 92 Gauge Mylar® MDA films are tough, general purpose films that are transparent in 48 through 92 gauge and translucent in heavier gauges. They have a rough surface to provide ease of handling, good adhesion..
Film Tensile Strength at Break, TD	234 MPa	34000 psi	ASTM D882A
DuPont Teijin Films Mylar® WC Polyester Film, 75 Gauge Mylar® WC films are general-purpose electrical grade films, similar to Mylar® EL. These clear to hazy films are tough and durable as a core wrap. They offer good dielectrics and good handling char..
Film Tensile Strength at Break, TD	234 MPa	34000 psi	ASTM D882A
DuPont Teijin Films Mylar® WC11/WC22 Polyester Film, 142 Gauge Mylar® type WC11 films are general-purpose electrical grade films, similar to Mylar® EL. These clear to hazy films are tough and durable as a core wrap. They offer good dielectric and good handlin..