Polymer Property : Tensile Strength, Ultimate = 10.0 MPa Product List

Mechanical Properties

Tips: 30 items are displayed at most.

Mechanical Properties	Metric	English	Comments
Tensile Strength, Ultimate	10.0 MPa	1450 psi	no post cure, press cured for 5 minutes; ASTM D412
Multibase SILASTIC® 7-6860 Dow-Corning Biomedical Grade Liquid Silicone Rubber Information provided by Multibase
Tensile Strength, Ultimate	10.0 MPa	1450 psi	500 mm/min (20 in./min.); ASTM D638, Type IV Specimen
Eastman 1924P Polyethylene  (discontinued **) Low-density polyethylene 1924P is a resin in the boardstock coating industry for use in breadboard, cupstock, and liquid packaging board. This material has an excellent combination of low neck-in, ..
Tensile Strength, Ultimate	10.0 MPa	1450 psi	500 mm/min (20 in./min.); ASTM D638, Type IV Specimen
Eastman 808A Polyethylene  (discontinued **) Low density polyethylene 808A is a general-purpose formulation used for injection molding and general-purpose extrusion.Unless otherwise noted, all tests are run at 23°C and 50% RH.Information from..
Tensile Strength, Ultimate	10.0 MPa	1450 psi	500 mm/min (20 in./min.); ASTM D638, Type IV Specimen
Eastman 808P Polyethylene  (discontinued **) Low density polyethylene 808P is a low density resin designed for applications, such as sugar pouches and freezer wrap, where high coating speeds and good drawdown are required. The combination of ..
Tensile Strength, Ultimate	10.0 - 182 MPa	1450 - 26400 psi	Average value: 103 MPa Grade Count:57
Overview of materials for Acetal Copolymer, 30% Glass Fiber Reinforced This property data is a summary of similar materials in the MatWeb database for the category "Acetal Copolymer, 30% Glass Fiber Reinforced". Specific grades with glass content between 25% and 34% ar..
Tensile Strength, Ultimate	10.0 MPa	1450 psi	ASTM D638
Global MM-1018 Low Density Polyethylene, Lamination Coating Grade  (discontinued **) Description-transparency, high toughness, flexibility, high impact strength, good chemical resistanceApplications-laminates, coating applications, food applicationsMeets FDA requirements as listed i..
Tensile Strength, Ultimate	10.0 MPa	1450 psi	ASTM D638
Huntsman PE1023 Film Extrusion Polyethylene  (discontinued **) Homopolymer, and FDA compliant.Features: Good draw down characteristics.Applications: Film extrusion: drum liners, hardware packaging, and refuse bags.FDA Notes: Conforms to FDA regulation 21 CFR 17..
Tensile Strength, Ultimate	10.0 MPa	1450 psi	ASTM D638
Huntsman PE1055 Film Extrusion Polyethylene  (discontinued **) Homopolymer, and FDA compliant.Features: Yields film with excellent optical and draw down characteristicsApplications: Film extrusion: soft goods and other high clarity packaging.FDA Notes: Conforms..
Tensile Strength, Ultimate	10.0 MPa	1450 psi	ASTM D638
Huntsman PE1065 Film Extrusion Polyethylene  (discontinued **) Homopolymer and FDA compliant.Features: Yields film with excellent optical and machinability.Applications: Film extrusion: soft goods and other high clarity packaging.FDA Notes: Conforms to FDA regu..
Tensile Strength, Ultimate	10.0 MPa	1450 psi	ASTM D638
Huntsman PE1068 Film Extrusion Polyethylene  (discontinued **) Homopolymer and FDA compliant.Features: Exceptional draw down and processability even to 1/2 mil; excellent strength, good heat sealability, and good optical.FDA Notes: Conforms to FDA regulation 21..
Tensile Strength, Ultimate	10.0 MPa	1450 psi	ASTM D638
Huntsman PE5030 Extrusion Coating Polyethylene  (discontinued **) Homopolymer and FDA compliant.Features: Good draw down, low neck-in, good heat sealability and adhesion, low smoking, and excellent printabilityApplications: Extrusion: coating grade and general coa..
Tensile Strength, Ultimate	10.0 - 35.2 MPa	1450 - 5110 psi	Average value: 26.2 MPa Grade Count:22
Overview of materials for Polypropylene with 20% Mica Filler This property data is a summary of similar materials in the MatWeb database for the category "Polypropylene with 20% Mica Filler". Specific grades with primary filler content between 15% and 24% are..
Tensile Strength, Ultimate	10.0 MPa	1450 psi	ASTM D638
Multibase Multi-FlexÂ® A 9402 AH Black TPE Thermoplastic Elastomer Forms: PelletsProcessing Methods:Injection Molding Information provided by Multibase
Tensile Strength, Ultimate	10.0 MPa	1450 psi	ASTM D412
Multibase Multi-FlexÂ® TPE A 5703 BLK The burn rate is 1.2 in/min (30 mm/min) based on ASTM FM VSS 302. Multi-Flex TPE contains Kratonâ„¢ G.Data provided by Multibase.
Tensile Strength, Ultimate	10.0 MPa	1450 psi
Sylvin Technologies 9915-60 Natural PVC Molding Compound Information provided by Sylvin Technologies Inc.
Tensile Strength, Ultimate	10.0 MPa	1450 psi	GB/T 528
Chengdu Polyster 7500 General Grade TPV Information provided by Chengdu Polyster Co., Ltd.
Tensile Strength, Ultimate	10.0 MPa	1450 psi
Dow Corning SILASTIC® 7-6860 BIOMEDICAL GRADE LSR, KIT Silastic® BioMedical Grade Liquid Silicone Rubbers are heat cured elastomer raw materials for use by customers fabricating medical devices.Information provided by Dow Corning
Tensile Strength, Ultimate	10.0 MPa	1450 psi
Dow Corning SILASTIC® Q7-4750 BIOMEDICAL GRADE ETR ELASTOMER, KIT Two-part, platinum-catalyzed (1:1 by weight), enhanced tear-resistant silicone elastomers are heat cured high consistency silicone rubbers designed for use by customers fabricating medical devices.I..
Tensile Strength, Ultimate	10.0 MPa	1450 psi
Dow DOWLEX™ IP-42 High Density Polyethylene DOWLEX® IP-42 resin is an improved processing high density polyethylene resin designed for excellent flow and high impact. DOWLEX IP-42 resin is designed by optimizing the breadth and shape of the ..
Tensile Strength, Ultimate	10.0 MPa	1450 psi
Dow DOWLEX™ IP-90 High Density Polyethylene Next Generation DOWLEX® IP-90 resin is a high flow improved processing high density polyethylene resin designed for ultra-thin wall injection molded containers and drink cups. This resin has been m..
Tensile Strength, Ultimate	10.0 MPa	1450 psi	ASTM D638
Huntsman PE2065 Injection Molding Polyethylene  (discontinued **) Homopolymer and FDA compliant.Features: General purpose injection molding resin with good flow characteristicsApplications: Injection molding: lids.FDA Notes: Conforms to FDA regulation 21 CFR 177.1..
Tensile Strength, Ultimate	10.0 MPa	1450 psi	ASTM D638-95
Multibase Multi-Flex® TPO D 5308 BLK The burn rate is 1 in/min (25 mm/min) based on ASTM FM VSS 302.Data provided by Multibase.
Tensile Strength, Ultimate	10.0 - 135 MPa @Temperature 60.0 - 150 °C	1450 - 19600 psi @Temperature 140 - 302 °F	Average value: 68.8 MPa Grade Count:4
Overview of materials for Polyethersulfone (PES) This property data is a summary of similar materials in the MatWeb database for the category "Polyethersulfone". Each property range of values reported is minimum and maximum values of appropriate M..
Tensile Strength, Ultimate	10.0 - 135 MPa @Temperature 60.0 - 150 °C	1450 - 19600 psi @Temperature 140 - 302 °F	Average value: 70.2 MPa Grade Count:2
Overview of materials for Polyethersulfone (PES), 30% Glass Fiber Filled This property data is a summary of similar materials in the MatWeb database for the category "Polyethersulfone (PES), 30% Glass Fiber Filled". Specific grades with glass content between 25% and 34% ..
Tensile Strength, Ultimate	10.0 MPa	1450 psi
Sylvin Technologies 9812A-70 Natural PVC for Injection Molding Information provided by Sylvin Technologies Inc.
Tensile Strength, Ultimate	10.0 MPa	1450 psi	ASTM D638
Huntsman PE2038 Injection Molding Polyethylene  (discontinued **) Homopolymer and FDA compliant.Features: High mechanical flexing properties, excellent processability, good stress crack resistance, and very good low temperature strength.Applications: Injection mol..
Tensile Strength, Ultimate	10.0 MPa	1450 psi	ASTM D638
Huntsman PE2053 Injection Molding Polyethylene  (discontinued **) Homopolymer, Drug Master File listed product, and FDA compliant.Features: High flow characteristics, good gloss, and processability.Applications: Injection molding: large moldings including housewar..
Tensile Strength, Ultimate	10.0 MPa	1450 psi	ASTM D638
Huntsman PE2062 Injection Molding Polyethylene  (discontinued **) Homopolymer and FDA compliant.Features: High flow characteristics combined with good glossApplications: Injection molding: large moldings including housewares and toys.FDA Notes: Conforms to FDA reg..
Tensile Strength, Ultimate	10.0 MPa	1450 psi	Molded property
Dow LDPE 535I Low Density Polyethylene, Liner Grade DOW LDPE 535I resin is a barefoot general purpose liner resin with medium clarity for medium modulus packaging applications. This material complies with U.S.FDA regulation 21 CFR 177.1520(c) 2.1 for..
Tensile Strength, Ultimate	10.0 - 163 MPa @Temperature -40.0 - 150 °C	1450 - 23600 psi @Temperature -40.0 - 302 °F	Average value: 69.4 MPa Grade Count:8
Overview of materials for Nylon 6, 20% Glass Fiber Filled This property data is a summary of similar materials in the MatWeb database for the category "Nylon 6, 20% Glass Fiber Filled".Specific grades with glass content between 15% and 24% are included. Ea..