Polymer Property : Tensile Strength, Ultimate = 16.0 MPa Product List

Mechanical Properties

Tips: 30 items are displayed at most.

Mechanical Properties	Metric	English	Comments
Tensile Strength, Ultimate	16.0 MPa	2320 psi	ASTM D638
NCMT NanoPAC™ S206 High Performance Polypropylene Nanocomposite Characteristics: High stiffness Supplementary of ABS Good impact resistant Less shrinkage Good thermal conductivity Applications: Toys Industry AutomobileInformation provided by Nano Composite Mater..
Tensile Strength, Ultimate	16.0 MPa	2320 psi	ISO 527
Premix Thermoplastics PRE-ELEC® PP 1395 PRE-ELEC PP 1395 is a dissipative thermoplastic compound based on polypropylene. The electrical dissipation is achieved by using special conductive carbon black. In addition to stable surface resist..
Tensile Strength, Ultimate	16.0 MPa	2320 psi	ASTM D638
North Wood Plastics HDPE with 40% Wood Fiber Data provided by North Wood Plastics, Inc.
Tensile Strength, Ultimate	16.0 MPa	2320 psi
3M Dyneon™ Fluorel™ FC-2180 Fluoroelastomer VF2 + HFP Dipolymer  (discontinued **) Data provided by the manufacturer, Dyneon LLC.Incorporated cure polymer, 65.9%F in polymer with 22% Medium Thermal Carbon Black (N990), 2% MgO, and 4% Ca(OH)2. Lower mold shrinkage and excellent co..
Tensile Strength, Ultimate	16.0 MPa	2320 psi
3M Dyneon™ Fluorel™ FE-5622Q Fluoroelastomer VF2 + HFP Dipolymer  (discontinued **) Data provided by the manufacturer, Dyneon LLC.Incorporated cure polymer, 65.9%F in polymer with 22% Medium Thermal Carbon Black (N990), 2% MgO, and 4% Ca(OH)2. The FE series grades are Dyneon's cle..
Tensile Strength, Ultimate	16.0 MPa	2320 psi
3M Dyneon™ Fluorel™ FE-5642Q Fluoroelastomer VF2 + HFP Dipolymer  (discontinued **) Data provided by the manufacturer, Dyneon LLC.Incorporated cure polymer, 65.9%F in polymer with 22% Medium Thermal Carbon Black (N990), 2% MgO, and 4% Ca(OH)2. The FE series grades are Dyneon's cle..
Tensile Strength, Ultimate	16.0 MPa @Temperature 120 °C	2320 psi @Temperature 248 °F	ISO 527
LATI LARIL 13-V1KC Mineral Filled Polyphenylene Oxide (PPOm) (UL94V-1)  (Unverified Data**) Description: Laril thermoplastics are polyphenylene oxide (PPOm) products. They exhibit excellent toughness, even at low temperatures, good thermal resistance and dimensional stability are the most ..
Tensile Strength, Ultimate	16.0 MPa	2320 psi	ASTM D412
Covestro Texin® DP7-1157 Thermoplastic Polyurethane + ABS Blend  (discontinued **) Information provided by Bayer Corporation, Plastics DivisionAs of 1 September 2015, Bayer MaterialScience was separated from Bayer AG and has officially adopted its new name – Covestro. This produ..
Tensile Strength, Ultimate	16.0 MPa	2320 psi	ASTM D638
ExxonMobil Escorene® LD-612 EVA Injection Molding Resin  (discontinued **) Data provided by the manufacturer, Exxon Chemical.A 5.8% vinyl acetate copolymer resin designed for molding and extrusion applications requiring low temperatures, flexibility and toughness. This re..
Tensile Strength, Ultimate	16.0 - 110 MPa	2320 - 16000 psi	Average value: 67.9 MPa Grade Count:16
Overview of materials for Polycarbonate, Conductive This property data is a summary of similar materials in the MatWeb database for the category "Polycarbonate, Conductive". Each property range of values reported is minimum and maximum values of appr..
Tensile Strength, Ultimate	16.0 - 4200 MPa	2320 - 609000 psi	Average value: 74.0 MPa Grade Count:86
Overview of materials for High Density Polyethylene (HDPE), Ultra High Molecular Weight This property data is a summary of similar materials in the MatWeb database for the category "High Density Polyethylene (HDPE), Ultra High Molecular Weight". Each property range of values reported i..
Tensile Strength, Ultimate	16.0 MPa @Thickness 2.00 mm	2320 psi @Thickness 0.0787 in	ASTM D4894
3M Dyneon™ TFM™ 4105 Modified PTFE, 25% Glass Fiber Filled  (discontinued **) Type II PTFE. Applications include valve seats, bearings, seals/gaskets, moldings, piston rings.Data provided by Dyneon.
Tensile Strength, Ultimate	16.0 MPa @Thickness 2.00 mm	2320 psi @Thickness 0.0787 in	ASTM D4894
3M Dyneon™ TF 4215 PTFE 25% Electrocarbon Filled  (discontinued **) Applications include bearings, seals/gaskets, packings, piston rings.Data provided by Dyneon.
Tensile Strength, Ultimate	16.0 MPa	2320 psi	ISO 37
Kuraray SEPTONÂ® S2004 Thermoplastic Rubber SEPTONÂ® is a series of high performance thermoplastic rubbers developed by Kuraray Co. Ltd. using its isoprene technology. SEPTONÂ® resins are hydrogenated styrenic block copolymers, which exhi..
Tensile Strength, Ultimate	16.0 MPa	2320 psi	ASTM D638
ITW Plexus Plexusâ„¢ 3940 Methacrylate Adhesive An adhesive with versatile substrate and application capabilities for a wide range of industrial product assembly applications.Fast tacking, low pressure sprayable adhesive with long bonding range, ..
Tensile Strength, Ultimate	16.0 MPa	2320 psi
Momentive Performance Materials TSE392 Translucent Adhesive Sealant, Thixotropic Paste One-part totally non-corrosive alkoxy cure. Alkoxy cure silicones are neutral cure materials that offer exceptional adhesion and are non-corrosive to most metals. Typical uses: Non-corrosive adhes..
Tensile Strength, Ultimate	16.0 MPa	2320 psi	at max load; ISO 527
A. Schulman FORMION™ FI 301 Ionomer Information provided by A. Schulman.
Tensile Strength, Ultimate	16.0 MPa	2320 psi	at max load; ISO 527
A. Schulman FORMION™ FI 301 Ionomer Information provided by A. Schulman.
Tensile Strength, Ultimate	16.0 MPa	2320 psi	at max load; ISO 527
A. Schulman FORMION™ FI 301 Ionomer Information provided by A. Schulman.
Tensile Strength, Ultimate	16.0 MPa	2320 psi	at max load; ISO 527
A. Schulman FORMION™ FI 342 Ionomer Information provided by A. Schulman.
Tensile Strength, Ultimate	16.0 MPa	2320 psi	at max load; ISO 527
A. Schulman FORMION™ FI 301 Ionomer Information provided by A. Schulman.
Tensile Strength, Ultimate	16.0 MPa	2320 psi	at max load; ISO 527
A. Schulman FORMION™ FI 301 Ionomer Information provided by A. Schulman.
Tensile Strength, Ultimate	16.0 MPa	2320 psi	at max load; ISO 527
A. Schulman FORMION™ FI 301 Ionomer Information provided by A. Schulman.
Tensile Strength, Ultimate	16.0 MPa	2320 psi	GB/T 528
Chengdu Polyster 9500 General Grade TPV Information provided by Chengdu Polyster Co., Ltd.
Tensile Strength, Ultimate	16.0 MPa	2320 psi	ASTM D638/D412
Covestro Bayflex® 110 RIM-LITE Polyurethane Elastomeric RIM, 13% Mineral Filled, MDI-based 2-Component Liquid System Contains 10% calcium silicate and 3% glass microspheres.0.15 in. thickness. RIM = Reaction Injection MoldingInformation provided by Bayer Corporation, Polyurethanes DivisionAs of 1 September 2015, ..
Tensile Strength, Ultimate	16.0 MPa	2320 psi	at max load; ISO 527
A. Schulman FORMION™ FI 342 Ionomer Information provided by A. Schulman.
Tensile Strength, Ultimate	16.0 MPa	2320 psi	ASTM D638
ExxonMobil Escorene® LD-730 High EVA Resin  (discontinued **) Data provided by the manufacturer, Exxon Chemical.A high vinyl acetate copolymer with a low melting temperature and excellent strength properties and toughness.Applications: Injection molding; Foams..
Tensile Strength, Ultimate	16.0 MPa	2320 psi	ASTM D638
LyondellBasell Astryn 65F5-4 Polypropylene Homopolymer, 40% Calcium Carbonate Key Features: conventional melt flow, high modulus, mineral-filled polypropylene homopolymer, high stiffness, excellent chemical resistance, good surface qualityApplications: automotive components, ..
Tensile Strength, Ultimate	16.0 - 67.0 MPa	2320 - 9720 psi	Average value: 42.9 MPa Grade Count:7
Overview of materials for ABS/Polyurethane Alloy This property data is a summary of similar materials in the MatWeb database for the category "ABS/Polyurethane Alloy". Each property range of values reported is minimum and maximum values of appropr..
Tensile Strength, Ultimate	16.0 MPa	2320 psi
3M Dyneon™ Aflas® FA-150P PTFE Fluoroelastomer  (discontinued **) Data provided by the manufacturer, Dyneon LLC.Non-incorporated cure polymer, 57%F in polymer with 19% Medium Thermal Carbon Black (N990), 4% Triallyl Isocyanurate (TAIC), 1% Percadox™ 14, 1% Sodium..