- HOME
- POLYMER SEARCH
- Polymer Property : Tensile Strength, Ultimate = 5000 psi
Polymer Property : Tensile Strength, Ultimate = 5000 psi Product List
Mechanical PropertiesTips: 30 items are displayed at most.
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Tensile Strength, Ultimate | 34.5 MPa | 5000 psi | |
|
Mykroy/Mycalex MM 600 Machining Grade Glass-bonded Mica Composite
Formerly known as grade MM 1100. Synthetic mica filler. Does not burn. Excellent radiation resistance (3 x 10^10 Rads-Cobalt).This ceramoplastic material is a versatile and efficient insulating m..
|
|||
| Tensile Strength, Ultimate | 34.5 MPa | 5000 psi | ASTM D412 |
|
MF-5062 Polyurethane-based Biomedical Elastomer |
|||
| Tensile Strength, Ultimate | 34.5 MPa | 5000 psi | TM R050-36 |
|
Resinlab® SEC1244 Silver Filled Epoxy Adhesive
Resinlab™ SEC1244 is a silver filled, two component, elevated temperature curing epoxy adhesive. It provides excellent electrical conductivity useful in many electronic applications. It is a smooth..
|
|||
| Tensile Strength, Ultimate | 34.5 - 90.0 MPa | 5000 - 13100 psi | Average value: 52.7 MPa Grade Count:35 |
|
Overview of materials for Polyphenylene Ether, Molded
This property data is a summary of similar materials in the MatWeb database for the category "Polyphenylene Ether, Molded". Each property range of values reported is minimum and maximum values of ap..
|
|||
| Tensile Strength, Ultimate | 34.5 - 44.8 MPa | 5000 - 6500 psi | Average value: 39.5 MPa Grade Count:10 |
|
Overview of materials for Acrylonitrile Butadiene Styrene (ABS), PTFE Filled
This property data is a summary of similar materials in the MatWeb database for the category "Acrylonitrile Butadiene Styrene (ABS), PTFE Filled". Each property range of values reported is minimum a..
|
|||
| Tensile Strength, Ultimate | 34.5 - 180 MPa | 5000 - 26100 psi | Average value: 93.7 MPa Grade Count:36 |
|
Overview of materials for Polyphenylene Sulfide (PPS) with 10% Glass Fiber Filler
This property data is a summary of similar materials in the MatWeb database for the category "Polyphenylene Sulfide (PPS) with 10% Glass Fiber Filler". Specific grades with glass content between 5% ..
|
|||
| Tensile Strength, Ultimate | 34.5 MPa | 5000 psi | ASTM Data |
|
Styron Magnumâ„¢ 344CC ABS
MAGNUM® ABS resins are thermoplastic materials which provide an excellent balance of processability, impact resistance and heat resistance as imparted by the various polymer compositions. MAGNUM ..
|
|||
| Tensile Strength, Ultimate | 34.5 MPa | 5000 psi | ASTM Data |
|
Styron Magnumâ„¢ 9095 ABS, High Gloss
MAGNUM® ABS resins are thermoplastic materials which provide an excellent balance of processability, impact resistance and heat resistance as imparted by the various polymer compositions. MAGNUM ..
|
|||
| Tensile Strength, Ultimate | 34.5 MPa | 5000 psi | ASTM Data |
|
Styron Magnumâ„¢ 9450P ABS, High Gloss
MAGNUM® ABS resins are thermoplastic materials which provide an excellent balance of processability, impact resistance and heat resistance as imparted by the various polymer compositions. MAGNUM ..
|
|||
| Tensile Strength, Ultimate | 34.5 MPa | 5000 psi | ASTM Data |
|
Styron Magnumâ„¢ 9700HF ABS
MAGNUM® ABS resins are thermoplastic materials which provide an excellent balance of processability, impact resistance and heat resistance as imparted by the various polymer compositions. MAGNUM ..
|
|||
| Tensile Strength, Ultimate | 34.5 MPa | 5000 psi | |
|
Williams Advanced Alloys WS225 Solder
All Williams alloys are available in a variety of shapes and forms, including ribbon, preforms, rod, ring, wire, and custom shapes.Information provided by Williams Advanced Alloys
|
|||
| Tensile Strength, Ultimate | 34.5 MPa | 5000 psi | |
|
Williams Advanced Alloys WS257 Solder
All Williams alloys are available in a variety of shapes and forms, including ribbon, preforms, rod, ring, wire, and custom shapes.Information provided by Williams Advanced Alloys
|
|||
| Tensile Strength, Ultimate | 34.5 MPa | 5000 psi | ASTM D412 |
|
Lubrizol Estane® MVT 90AF3 Thermoplastic Polyurethane, Moisture Vapor Transmission
Type: Estane® MVT 90AF3 TPU is a 90A aromatic polyether-based thermoplastic polyurethane.Features: High moisture vapor transmission, good physical properties and elasticity, free of organo-tin comp..
|
|||
| Tensile Strength, Ultimate | 34.5 MPa | 5000 psi | ASTM D412 |
|
Lubrizol Estane® 2103-84AEN Thermoplastic Polyurethane Elastomer
Formerly PellethaneFeature: Contains UV Stabilizer, NSF Standard 61 certifiedAvailable in Americas, Europe, Middle East, Africa, India and AsiaData provided by LubrizolLubrizol acquired the Pelletha..
|
|||
| Tensile Strength, Ultimate | 34.5 MPa | 5000 psi | ASTM D638 |
|
Ecomass® 1080ZB92 Filled Polyamide
Nontoxic alternative to Lead (Pb), radiation shielding applications.Moderate Specific GravityFilled Polyamide (PA) alloyExcellent ToughnessInformation provided by Technical Polymers
|
|||
| Tensile Strength, Ultimate | 34.5 - 48.3 MPa | 5000 - 7000 psi | |
|
Bulk Molding Compounds BMC 102 Glass Filled Thermoset Polyester
BMC 102 is a medium strength, glass fiber reinforced molding compound that meets Ford Specification ESF-M3D56-A. It can be supplied in bulk or extruded in pre-weighed slugs and is well suited for in..
|
|||
| Tensile Strength, Ultimate | 34.5 - 41.4 MPa | 5000 - 6000 psi | |
|
Bulk Molding Compounds BMC 1403 Electrical Grade
BMC 1403 is one of the most useful general-purpose electrical grade materials available on the market. Competitive against phenolic, melamine, and urea materials for electrical applications. Easy mo..
|
|||
| Tensile Strength, Ultimate | 34.5 - 41.4 MPa | 5000 - 6000 psi | |
|
Bulk Molding Compounds BMC 1454 for Injection Molding Circuit Breakers
BMC 1454 is a special low-cost material developed specifically for injection molding circuit breakers. It has considerable flame, arc and track resistance. BMC 1454 is a medium strength material wit..
|
|||
| Tensile Strength, Ultimate | 34.5 - 41.4 MPa | 5000 - 6000 psi | |
|
Bulk Molding Compounds BMC 1608 Very High Strength, Corrosion Resistant
BMC 1608 is a very high strength, general purpose, corrosion resistant material. Recommended for compression molding only. UL® recognized. Meets FDA requirements for food contact. This material was..
|
|||
| Tensile Strength, Ultimate | 34.5 - 48.3 MPa | 5000 - 7000 psi | |
|
Bulk Molding Compounds BMC 2270 Mineral Filled, Glass Reinforced Polyester
BMC 2270 molding compound is a mineral filled, glass-fiber-reinforced polyester compound suitable for compression and transfer molding. It is a general purpose material with medium impact strength a..
|
|||
| Tensile Strength, Ultimate | 34.5 - 62.1 MPa | 5000 - 9000 psi | |
|
Bulk Molding Compounds BMC 304 Automotive Grade Molding Compound
BMC 304 is a low profile, automotive grade molding compound that is suitable for Injection, Compression or Transfer molding operations. BMC 304 can be coated using traditional or electrostatic coati..
|
|||
| Tensile Strength, Ultimate | 34.5 - 48.3 MPa | 5000 - 7000 psi | |
|
Bulk Molding Compounds BMC 600 Mineral Filled, Glass Fiber Reinforced Polyester Compound
BMC 600 molding compound is a mineral filled glass-fiber-reinforced polyester compound suitable for compression, transfer and stuffer injection molding. It is a general purpose material with medium ..
|
|||
| Tensile Strength, Ultimate | 34.5 - 48.3 MPa | 5000 - 7000 psi | |
|
Bulk Molding Compounds BMC 2274 Mineral Filled, Glass Reinforced Polyester
BMC 2274 molding compound is a mineral filled, glass-fiber-reinforced polyester compound suitable for compression transfer and stuffer injection molding. It is a general-purpose material with medium..
|
|||
| Tensile Strength, Ultimate | 34.5 - 68.9 MPa | 5000 - 10000 psi | |
|
Bulk Molding Compounds BMC 300 Mineral Filled, Glass Reinforced Polyester
BMC 300 is a general purpose, mineral filled, glass fiber-reinforced polyester that is suitable for compression, transfer and stuffer injection molding. Our Granite-X series of molding compounds bel..
|
|||
| Tensile Strength, Ultimate | 34.5 MPa | 5000 psi | ASTM D412 |
|
BASF Elastollan® M95A55 Polyester Type Polyurethane Elastomer
The Elastollan M Series of products listed are part of a new series of polyester-based thermoplastic polyurethanes (TPU). They are specifically formulated for fast cycling in Injection Molding appl..
|
|||
| Tensile Strength, Ultimate | 34.5 MPa | 5000 psi | ASTM D412 |
|
MF-5040 Polyurethane-based Biomedical Elastomer |
|||
| Tensile Strength, Ultimate | 34.5 MPa | 5000 psi | TM R050-36 |
|
Resinlab® EP1056LC Urethane Modified Epoxy Adhesive
Resinlab™ EP1056LC is a two part urethane modified epoxy adhesive designed to give good adhesion to metals and hard to bond surfaces such as PVC. It is thixotropic to provide good gap filling abili..
|
|||
| Tensile Strength, Ultimate | 34.5 MPa | 5000 psi | ASTM D412 |
|
MF-5056 Polyurethane-based Biomedical Elastomer |
|||
Copyright © lookpolymers.com All Rights Reserved