| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Tensile Strength, Ultimate | 60.0 MPa | 8700 psi | ISO 527 |
|
LATI LASTANE 50 G/25 25% Glass Fiber Reinforced Polyurethane (PUR)
(Unverified Data**)
Description: Lastane thermoplastics are polyurethane (PUR) products. They exhibit good wear and impact resistance, even at low temperatures, noise inertness and excellent mould release. These proper..
|
|||
| Tensile Strength, Ultimate | 60.0 MPa | 8700 psi | ASTM D882 |
|
SABIC Innovative Plastics Lexan® FR60 Polycarbonate Film, Flame Retardant
Lexan FR60 flame-retardant film is a clear, thin-gauge polycarbonate film with polished surfaces on both sides, and a UL94 V-0 listing to meet the stringent requirements in a wide range of electrica..
|
|||
| Tensile Strength, Ultimate | 60.0 MPa | 8700 psi | ISO 527 |
|
LATI LATILUB 95-25GR CE/10 Polysulfone Base (PSU), 25% Graphite, 10% Special Mineral Filled Self Lubricating Plastic
Description: Latilub self-lubricating plastic materials are more and more often designed to replace metals in applications such as gears, bushings, cams, slides, etc), for which, besides their intri..
|
|||
| Tensile Strength, Ultimate | 60.0 MPa | 8700 psi | ISO 527 |
|
LATI LATILUB 82-01M Nylon 12 Base, 1% Molybdenum Disulfide Self Lubricating Plastic
(discontinued **)
Description: Latilub self-lubricating plastic materials are more and more often designed to replace metals in applications such as gears, bushings, cams, slides, etc), for which, besides their intri..
|
|||
| Tensile Strength, Ultimate |
60.0
-
140
MPa @Temperature 60.0 - 150 °C |
8700
-
20300
psi @Temperature 140 - 302 °F |
Average value: 95.6 MPa Grade Count:2 |
|
Overview of materials for Nylon 612, Glass Fiber Filler
This property data is a summary of similar materials in the MatWeb database for the category "Nylon 612, Glass Fiber Filler". Each property range of values reported is minimum and maximum values of ..
|
|||
| Tensile Strength, Ultimate | 60.0 - 250 MPa | 8700 - 36300 psi | Average value: 131 MPa Grade Count:27 |
|
Overview of materials for Nylon 12, Carbon Fiber Filled
This property data is a summary of similar materials in the MatWeb database for the category "Nylon 12, Carbon Fiber Filled". Each property range of values reported is minimum and maximum values of ..
|
|||
| Tensile Strength, Ultimate | 60.0 - 140 MPa | 8700 - 20300 psi | Average value: 110 MPa Grade Count:30 |
|
Overview of materials for Nylon 12, 30% Glass Fiber Filled
This property data is a summary of similar materials in the MatWeb database for the category "Nylon 12, 30% Glass Fiber Filled". Specific grades with glass content between 25% and 34% are included. ..
|
|||
| Tensile Strength, Ultimate | 60.0 MPa | 8700 psi | ASTM data at 5 mm/min. |
|
BASF Capron® 8202C HS Nylon 6 (Conditioned)
(discontinued **)
Capron 8202C HS is a heat stabilized, low viscosity, polyamide 6 injection molding homopolymer possessing a modified crystalline structure for increased property performance and faster cycles. It i..
|
|||
| Tensile Strength, Ultimate | 60.0 MPa | 8700 psi | DIN 53455; ASTM D638 |
|
Kolon NOPLA® KE831 PEN-PET Copolyester
NOPLA® is an advanced PEN-PET copolyester which can be used for bottle, sheet & injection molding applicationsUV protection & prolonged outdoor durability, enhanced gas barrier, outstanding impac..
|
|||
| Tensile Strength, Ultimate | 60.0 MPa | 8700 psi | ASTM D638 |
|
LG Chemical Lupoy 3010-10 Polycarbonate Resin
Description: LUPOY PC 3010-10 resin is designed for injection molding products. It exhibits an excellent physical property balance of heat resistance, transparency and impact strength.Main Character..
|
|||
| Tensile Strength, Ultimate | 60.0 MPa | 8700 psi | ASTM D638 |
|
LG Chemical Lupoy 3010-22 Polycarbonate Resin
Description: LUPOY PC 3010-22 resin is designed for injection molding products. It exhibits an excellent physical property balance of heat resistance, transparency and impact strength.Main Character..
|
|||
| Tensile Strength, Ultimate | 60.0 MPa | 8700 psi | ASTM D638 |
|
LG Chemical Lupoy 3030-10 Polycarbonate Resin
Description: LUPOY PC 3030-10 resin is designed for injection molding products. It exhibits an excellent physical property balance of heat resistance, transparency and impact strength.Main Character..
|
|||
| Tensile Strength, Ultimate |
60.0
MPa @Temperature 22.0 °C |
8700
psi @Temperature 71.6 °F |
25mm flat samples, compression moulded; ISO 527-4 |
|
Menzolit Menzolit® SMC 0200 Unsaturated Polyester UP
SMC 0200 is a general purpose SMC for a wide range of applications. Typically, it is used as housings, covers and functional components in mechanical engineering. The flammability meets the demands ..
|
|||
| Tensile Strength, Ultimate | 60.0 MPa | 8700 psi | ISO 527 |
|
Solvay Technyl® A 205F Nylon 66, EH0
Unreinforced polyamide 66, high fluidity, fast cycling grade, for injection molding.Technyl A 205F offers two main advantages: excellent filling qualities and UL 94 V2 under 0.4 mm. It is particula..
|
|||
| Tensile Strength, Ultimate | 60.0 MPa | 8700 psi | ASTM D638 |
|
Plenco 00757 Melamine-Phenolic, Granular, Injection Molded
PLENCO 00757 is a melamine-phenolic, copolymer molding compound, offering excellent arc resistance and comparative track index values. It is formulated to provide improved mechanical strength proper..
|
|||
| Tensile Strength, Ultimate | 60.0 MPa | 8700 psi | ISO 527-1, 2 |
|
Polyplastics Duranex® 300FP Polybutylene Terephthalate (PBT), Unfilled PBT for film, Extrusion, High Flow
DURANEX® is a crystalline thermoplastic based on polybutylene terephthalate (PBT) that can be readily strengthened, modified, or otherwise performance enhanced through the addition of glass fibers ..
|
|||
| Tensile Strength, Ultimate | 60.0 MPa | 8700 psi | 5mm/min; ISO 527-1, 2 |
|
Polyplastics TOPAS® 6015 Cyclic Olefin Copolymer (COC) (Asia/Pacific Grade)
A similar grade to 6013. However, heat deflection temperature is (HDT/B) = 150°C. This is a temperature that cannot be achieved with many other amorphous polymers.Information provided by PolyPlasti..
|
|||
| Tensile Strength, Ultimate | 60.0 MPa | 8700 psi | |
|
Covestro Makrolon® 8025 Polycarbonate
High viscosity extrusion and injection molding grade with 20% short glass fibers and easy mold release, low anisotropy, for stiff moldings requiring good dimensional stability.Information provided b..
|
|||
| Tensile Strength, Ultimate |
60.0
MPa @Temperature 200 °C |
8700
psi @Temperature 392 °F |
ISO 527-1/-2 |
|
DSM Stanyl® OCD2100 BK27021 PA46-GF40
40% Glass Reinforced, Heat Stabilized
|
|||
| Tensile Strength, Ultimate |
60.0
MPa @Temperature 200 °C |
8700
psi @Temperature 392 °F |
ISO 527-1/-2 |
|
DSM Stanyl® OCD2300 BLK PA46-GF50
50% Glass Reinforced, Heat Stabilized
|
|||
| Tensile Strength, Ultimate | 60.0 MPa | 8700 psi | 5mm/min; ISO 527 |
|
BASF Ultramid® 8272G HS BK-102 12% Glass Filled PA6 (Conditioned)
Ultramid 8272G HS BK-102 is a 12% glass fiber reinforced, black pigmented, thermally modified, nylon 6 blow molding compound offering an excellent balance of engineering properties combined with the..
|
|||
| Tensile Strength, Ultimate | 60.0 MPa | 8700 psi | ATSM D638 |
|
Ashley Polymers Ashlene® 745 Nylon 6/69
A special copolymer ideal for blown and cast film coextrusion. This is a gel free resin with outstanding lot to lot consistency being produced by a continuous process. It has a lower melting point..
|
|||
| Tensile Strength, Ultimate | 60.0 MPa | 8700 psi | ATSM D638 |
|
Ashley Polymers Ashlene® 746 Nylon 6/69
A special copolymer ideal for blown and cast film coextrusion. This is a gel free resin with outstanding lot to lot consistency being produced by a continuous process. It has a lower melting point..
|
|||
| Tensile Strength, Ultimate | 60.0 MPa | 8700 psi | ASTM D638 |
|
A. Schulman ComAlloy Hiloy® 662 Nylon 6, Glass Bead Reinforced
Data provided by the manufacturer, ComAlloy International Company.20% Glass Bead Reinforced.The ComAlloy product line has been integrated into the A Schulman product line.
|
|||
| Tensile Strength, Ultimate |
60.0
-
150
MPa @Temperature 120 - 200 °C |
8700
-
21800
psi @Temperature 248 - 392 °F |
Average value: 103 MPa Grade Count:7 |
|
Overview of materials for Nylon 46, Glass Fiber Reinforced
This property data is a summary of similar materials in the MatWeb database for the category "Nylon 46, Glass Fiber Reinforced". Each property range of values reported is minimum and maximum values ..
|
|||
| Tensile Strength, Ultimate | 60.0 MPa | 8700 psi | ASTM data at 5 mm/min. |
|
BASF Capron® 8253 Impact Modified Nylon 6 (Dry)
(discontinued **)
Capron 8253 is an unfilled type 6 graft copolymer developed for both injection molding and extrusion applications. It is also available in heat stabilized (Capron 8253 HS) and/or pigmented versions..
|
|||
| Tensile Strength, Ultimate | 60.0 MPa | 8700 psi | ATSM D638 |
|
Ashley Polymers Ashlene® PC/ABS Alloy 307WO
General purpose flame retardant with high impact, good low temperature properties and high heat resistance.Data provided by the manufacturer
|
|||
| Tensile Strength, Ultimate |
60.0
-
75.0
MPa @Temperature 130 - 175 °C |
8700
-
10900
psi @Temperature 266 - 347 °F |
Average value: 69.4 MPa Grade Count:2 |
|
Overview of materials for Nylon 6, 20% Glass Fiber Filled
This property data is a summary of similar materials in the MatWeb database for the category "Nylon 6, 20% Glass Fiber Filled".Specific grades with glass content between 15% and 24% are included. Ea..
|
|||
| Tensile Strength, Ultimate | 60.0 - 120 MPa | 8700 - 17400 psi | Average value: 89.8 MPa Grade Count:13 |
|
Overview of materials for Polystyrene + Polyphenylene Ether, Glass Filler
This property data is a summary of similar materials in the MatWeb database for the category "Polystyrene + Polyphenylene Ether, Glass Filler". Each property range of values reported is minimum and ..
|
|||
| Tensile Strength, Ultimate | 60.0 MPa | 8700 psi | ATSM D638 |
|
Ashley Polymers Ashlene® P1051R Polycarbonate
A high flow transparent polycarbonate with good impact properties.Data provided by the manufacturer
|
|||