Polymer Property : Flexural Modulus = 1.90 GPa Product List

Mechanical Properties

Tips: 30 items are displayed at most.

Mechanical Properties	Metric	English	Comments
Flexural Modulus	1.90 GPa <br>@Temperature 23.0 °C	276 ksi <br>@Temperature 73.4 °F	ISO 178
Polykemi AB POLYfill PP CQX30030 RTX Polypropylene, Mineral Reinforced, Scratch Resistant Information provided by Polykemi AB
Flexural Modulus	1.90 GPa <br>@Temperature 23.0 °C	276 ksi <br>@Temperature 73.4 °F	ISO 178
Polykemi AB POLYfill PPC T3020 Polypropylene Copolymer, Mineral Reinforced Information provided by Polykemi AB
Flexural Modulus	1.90 GPa	276 ksi	ISO 178/1A
Radici Raditer® B N 100 T Polybutylene Terephthalate Raditer® B N 100T is a high impact modified thermoplastic polyester based on polybutylene terephthalate. The PBT compounds combine excellent thermal, mechanical, electrical and chemical properties..
Flexural Modulus	1.90 GPa	276 ksi	2 mm/min; ISO 178
SABIC Innovative Plastics GELOY CR7020 ASA (Europe-Africa-Middle East) GELOY CR7020 is a profile extrusion and co-extrusion grade, blend of ASA/SAN. In co-extrusion it can be used over CYCOLAC, PVC or other compatible polymers.
Flexural Modulus	1.90 GPa	276 ksi	2 mm/min; ISO 178
SABIC Innovative Plastics Geloy CR7520 ASA (Europe-Africa-Middle East) Geloy CR7520 is a general purpose injection moulding grade, blend of ASA/SAN. It can be positioned for outside parts in various markets, such as telecommunication, transportation, B&C, lighting and ..
Flexural Modulus	1.90 GPa	276 ksi	DIN 53452; ASTM D790
Kolon KopaÂ® KN161 Nylon 6 Resin KOPA is widely used in the automobile and industrial parts.General KOPA N-6 Features: Good mechanical properties, Extreme toughness, Outstanding self-lubrication and abrasion resistance, Excellent c..
Flexural Modulus	1.90 GPa	276 ksi	Tangent at 0.05 in/min; ASTM D790A
LyondellBasell Astryn SD068-4 Polypropylene Copolymer, 40% Calcium Carbonate Key Features: fractional melt flow, high modulus, mineral-filled, blow molding and extrusion grade polypropylene copolymer, good melt strength, excellent processability, excellent impact and stiffne..
Flexural Modulus	1.90 GPa	276 ksi	2 mm/min; ISO 178
SABIC Innovative Plastics XenoyÂ® CL500U PBT+PC (Europe-Africa-Middle East) XENOY CL500U is a semi-crystalline blend, developed for exterior automotive parts ( except bumper shells ) and non automotive parts, requiring good impact, excellent chemical resistance and UV stabi..
Flexural Modulus	1.90 GPa	276 ksi	2 mm/min; ISO 178
SABIC Innovative Plastics LNP THERMOCOMP HX03409C PA11 LNP* THERMOCOMP* HX03409C is a compound based on Nylon 11 resin containing Proprietary Filler(s). Added features of this material include: Clean Compound System, High Specific Gravity.
Flexural Modulus	1.90 GPa	276 ksi	ASTM D790
Styrolution StyroluxÂ® 656 C SBC Description: StyroluxÂ® 656 C is a clear styrene-butadiene copolymer (SBC) with enhanced flow properties. It is used almost exclusively for injection molding of rigid, tough parts requiring highes..
Flexural Modulus	1.90 GPa <br>@Thickness 4.00 mm	276 ksi <br>@Thickness 0.157 in	2mm/min, injection molded, unannealed; ISO 178
Styron EMERGEâ„¢ 5100 Acrylonitrile Butadiene Styrene (ABS) EMERGEâ„¢ ABS 5100 is a pre-colored, white, ABS resin, having high opacity and excellent toughness intended for manufacture of laser-marketable injection-molded smart cards.Information provided b..
Flexural Modulus	1.90 GPa	276 ksi	ISO 178
Solvay TECHNYLÂ® A 216 S30 PA66, 30% glass spheres, Conditioned Description: Polyamide 66, reinforced with 30% of glass spheres, for injection molding.Available in: EuropeProduct Applications: TECHNYLÂ® A 216 S30 is used in all sectors of industry, offering an..
Flexural Modulus	1.90 GPa	276 ksi	1.3 mm/min, 50 mm span; ASTM D790
SABIC Innovative Plastics NORYL GTX GTX914 PPE+PA (Europe-Africa-Middle East) NORYL GTX914 is an unfilled GTX grade with an ideal combination of impact performance, dimensional stability at elevated temperatures, chemical resistance and processability.
Flexural Modulus	1.90 GPa	276 ksi	2 mm/min; ISO 178
SABIC Innovative Plastics NORYL GTX GTX944 PPE+PA (Asia Pacific) NORYL GTX944 is an unfilled GTX grade with improved processability and increased impact performance.
Flexural Modulus	1.90 GPa	276 ksi	2 mm/min; ISO 178
SABIC Innovative Plastics XenoyÂ® XD1575S PBT+PC (Europe-Africa-Middle East) XENOY XD1575S is a high flow PC+PBT blend with good impact properties and good resistance to occasional solvent and gasoline contact. XENOY XD1575S has been specially developed for coated exterior b..
Flexural Modulus	1.90 GPa	276 ksi	2 mm/min; ISO 178
SABIC Innovative Plastics LNP Thermocomp R1000HI620 PA 66 (Europe-Africa-Middle East) Impact modified Polyamide 66 injection moulding resin.This data was supplied by SABIC-IP for the Europe-Africa-Middle East region.
Flexural Modulus	1.90 GPa	276 ksi	ASTM D790
A. Schulman POLYFORT™ FPP 1603 Glass Reinforced Copolymer DescriptionPolyfort® FPP 1603 is a 10% glass reinforced copolymer. It has good impact and heat resistance. Information provided by A. Schulman.
Flexural Modulus	1.90 GPa	276 ksi	ASTM-D790
Polyram RamTal PM1419 Acetal, PTFE Filled Polyacetal filled with PTFE for sliding parts, low friction and improved wear resistance in molded parts.Information provided by Polyram Ram On Ind.
Flexural Modulus	1.90 GPa	276 ksi	ASTM D790
Eastman DuraStar MN631 Polymer, Natural Durastar Polymer MN631 contains a mold release. It has excellent appearance and is nearly water-clear. Its most outstanding features are toughness, chemical resistance, and excellent processing char..
Flexural Modulus	1.90 GPa	276 ksi	DIN 52457
CP-Polymer-Technik Wellamid® 6600/58 HWCP Nylon 66, Impact Modified Until -40°C, Heat Stabilized, Dry Information provided by CP-Polymer-Technik GmbH & Co. KG
Flexural Modulus	1.90 GPa	276 ksi	Secant; ISO 178
ExxonMobil Exxtral™ LNU 011 Performance Polyolefin Product Description: A specialty thermoplastic polyolefin resin with high stiffness, high gloss, low discoloration and good detergent resistance for large electrical appliances such as washing machi..
Flexural Modulus	1.90 GPa	276 ksi	ISO Data
BASF Ultramid® 8253 HS BK-102 PA6 (Dry) Ultramid 8253 HS BK-102 is a heat stabilized, pigmented black, impact modified type 6 nylon graft copolymer developed for both injection molding and extrusion applications. It exhibits varying leve..
Flexural Modulus	1.90 GPa	276 ksi	ASTM D790
Ashley Polymers Ashlene® 980LS Nylon 612 A general purpose 612 nylon for injection molding, lubricated and heat stabilized. These resins are noted for their low moisture absorption and excellent dimensional stability.Data provided by the ..
Flexural Modulus	1.90 GPa	276 ksi	ASTM D790
Ashley Polymers Ashlene® 981S Nylon 612 A general purpose heat stabilized 612 Nylon for extrusion. These resins are noted for their low moisture absorption and excellent dimensional stability.Data provided by the manufacturer
Flexural Modulus	1.90 GPa	276 ksi	ASTM D790
Ashley Polymers Ashlene® ABS Resin F-217 General purpose super high impact with good gloss.Data provided by the manufacturer
Flexural Modulus	1.90 GPa <br>@Temperature 23.0 °C	276 ksi <br>@Temperature 73.4 °F	ISO 178
Polykemi AB POLYfill PPHC K1035 Polypropylene, Mineral Reinforced Information provided by Polykemi AB
Flexural Modulus	1.90 GPa	276 ksi	ASTM D790
Ashley Polymers Ashlene® RH180ST Acetal A high impact homopolymer resin.Data provided by the manufacturer
Flexural Modulus	1.90 GPa	276 ksi	1.3 mm/min, 50 mm span; ASTM D790
SABIC Innovative Plastics Cycolac® EX39 ABS Highest impact extrusion ABS for sheet and blow molding applications.
Flexural Modulus	1.90 GPa	276 ksi	ISO 178
Premix Thermoplastics PRE-ELEC® PA 1408 Conductive Thermoplastic Compound PRE-ELEC® PA 1408 is a conductive thermoplastic compound based on polyamide 6. Conductivity is achieved by using conductive carbon black. In addition to a low electrical resistivity PRE-ELEC® PA 1..
Flexural Modulus	1.90 GPa	276 ksi	ASTM D790A
BP Amoco Accpro® 9117 Enhanced Polypropylene  (discontinued **) Suggested fabrication methods: Sheet; ExtrusionFeatures: Improved MVTR, Stain resistanceTypical applications: Film, Rigid packagingComplies with FDA specification, Title 21, CFR 177.1520.Typical pro..